结构选择优化及过正量膜厚控制在激光析光膜中的应用

分忻了膜系设计中的膜层结构选择性优化方法,阐述了用光电极值法控制非λ／4膜系的膜厚的方法计算出沉积每一层县有极值的波长,然后根据此波长,给出一定的过正量进行膜厚模拟,最后确定每‘层的监控波长。利用这种方法可以提高膜系厚度的控制精度。该义介绍了自主开发膜系设计软件的部分功能,并利用该软件设计并镀制出1060nm的激光析光膜。     

高压增氧T′相R_2CuO_(4+δ)(R=Nd～Tm)低温磁性研究

T′相R2CuO4稀土铜氧化合物由于尺度效应而产生弱铁磁性行为已经被人们关注,报导了通过高温高氧压(6GPa,1000℃)合成稀土T′相R2CuO4(R=Nd,Sm,Eu,Gd,Tb,Dy,Ho,Er和Tm)化合物的结构和磁学性能。磁化率曲线显示,在低温下所有的高压增氧R2CuO4样品都出现新的低温弱铁磁性反常行为,转变温度在28K附近。新的低温弱铁磁性行为是由于CuO2面上微量氧空穴的掺入,使处于反铁磁有序CuO2面形成局域化的铁磁性团簇造成。实验证明新发现的低温弱铁磁性行为与尺度效应产生弱铁磁性行为属于完全不同的物理机制。结果还预示T′相R2CuO4稀土铜氧化合物很难通过空穴掺杂而实现超导。     

The First Results of Supersonic Molecular Beam Injection in the HL-2A Tokamak

HL-2A tokamak, the first tokamak with divertor in China, has been constructed and put into operation in 2002. The main parameters are R=1.65 m, a=0.4 m, BT=2.8 T, Ip = 0. 48 MA. The divertor of HL-2A is unique, because it is characterized with a large closed divertor chamber. The device has double divertor chamber, but now it is operating with lower single null configuration to study the physics of divertor for the next step design of a divertor. Supersonic molecular beam injection （SMBI） system with LN2 cooling trap was first installed and demonstrated on the HL-2A tokamak in 2004. The first results of SMBI into HL-2A plasma are to demonstrate the function of the HL-2A divertor and to observe the cold pulse propagation during multi-pulse SMBI on HL-2A Tokamak.     

催化剂对纳米非晶碳膜场发射性能的影响

利用微波等离子体增强化学气相沉积(MPECVD)法,在经处理的单晶硅衬底上沉积了纳米非晶碳薄膜.通过Raman、SEM、XRD表征,研究了催化剂对纳米非晶碳膜的生长速率及场发射性能的影响.结果表明,在制备纳米非晶碳膜时使用FeC13,作为催化剂可大幅提高其生长速率.在相同的制备条件下,与未加FeCl3催化剂制备的纳米非...     

High entanglement generation and high fidelity quantum state transfer in a non-Markovian environment

This paper analyses a system of two independent qubits off-resonantly coupled to a common non-Markovian reservoir at zero temperature. Compared with the results in Markovian reservoirs, we find that much higher values of entanglement can be obtained for an initially factorized state of the two-qubit system. The maximal value of the entanglement increases as the detuning grows. Moreover, the entanglement induced by non-Markovian environments is more robust against the asymmetrical couplings between the two qubits and the reservoir. Based on this system, we also show that quantum state transfer can be implemented for arbitrary input states with high fidelity in the non-Markovian regime rather than the Markovian case in which only some particular input states can be successfully transferred.     

对密立根油滴实验的测量方法改进

利用对密立根油滴实验的改进解出了实验操作过程中的各种问题,提高学生的实验兴趣和理论联系实际的能力.     

金刚石薄膜的结构特征对薄膜附着性能的影响

在不同实验条件下，用微波等离子体化学气相沉积设备在硬质合金(WC+6%Co)衬底上沉积了 具有不同结构特征的金刚石薄膜.用Raman谱表征薄膜的品质和应力，用压痕实验表征薄膜的 附着性能，考察了薄膜中sp²杂化碳含量、形核密度、薄膜厚度对薄膜附着性能 的影响.结 果表明：sp²杂化碳的缓冲作用使薄膜中sp²杂化碳的含量对薄膜中 残余应力有较大的影 响，从而使薄膜压痕开裂直径统计性地随sp²杂化碳含量的增加而减小；仅仅依 靠超声遗 留的金刚石晶籽提高形核密度并不能有效改变薄膜与硬质合金基体之间的化学结合状况，从 而不能有效提高薄膜在衬底上的附着性能；在薄膜较薄时，晶粒之间没有压应力的存在，开 裂直径并不明显随厚度增加而增加，只有当薄膜厚度增加到一定值，晶粒之间才有较强压应 力存在，开裂直径随厚度的增加而较为迅速地增加. 关键词： 金刚石薄膜 附着性能 2杂化碳')" href="#">sp²杂化碳 成核密度 薄膜厚度     

Internet中的物理资源

对Internet中的物理资源进行了较系统的介绍，主要内容有：综合物理网站、物理期刊网站和物理教学网站，其中重点介绍了美国和欧洲主要国家的物理网站和物理期刊网站，利用这些物理站点，可以方便的进行文献检索、物理会议查询，物理教学相关资料的查询和世界各大学物理系的查询；可以方便快捷的了解当今世界各国的物理教学学科研的最新进展，文中对各个物理站点的使用方法都一一做了详细的介绍，以方便读者使用。     

Structural Stability of CaCuMn6O12 under High Pressure and Low Temperature

In situ high pressure energy-dispersive x-ray synchrotron radiation diffraction and resistance experiments are carried out on CaCuMn6O12. Its crystal structure is stable in the measured pressure range. The equation of state of CaCuMn6O12 is obtained from the V/Vo - P relationship （V and Vo are the volumes at pressure P and at atmosphere）. The bulk modulus Bo is calculated based on the Birch-Murnaghan equation. Low temperature x-ray diffraction shows no phase transition occurring down to 160K.