Evaluation of Poly(glycidyl methacrylate)-Coated Column for Enantioseparation with Azithromycin Lactobionate and Clindamycin Phosphate as Chiral Selectors in Capillary Electrophoresis

Chromatographia - In this study, a poly(glycidyl methacrylate) nanoparticle (PGMA NP)-coated column system with two antibiotics as selector was constructed for enantioseparation. The PGMA NP...     

Single Chlamydomonas reinhardtii cell separation from bacterial cells and auto-fluorescence tracking with a nanosieve device

A planar, transparent, and adaptable nanosieve device is developed for efficient microalgae/bacteria separation. In the proposed method, a sacrificial layer is applied with dual photolithography patterning to achieve a 1D channel with a very low aspect ratio (1:10 000). A microalgae/bacteria mixture is then introduced into the deformable PDMS nanochannel. The hydrodynamic deformation of the nanochannel is regulated to allow the bacteria cells to pass through while leaving the microalgae cells trapped in the device. At a flow rate of 4 μL/min, the supernatant collected from the device is indistinguishable from a control solution, indicating that nearly all the microalgae cells are trapped in the device. Additionally, this device is capable of single cell auto-fluorescence tracking. These microalgae cells demonstrate minimal photobleaching over 250 s laser exposure and could be used to monitor hazardous compounds in the sample with a continuous flow. This method will be valuable to purify microalgae samples containing contaminations and study single-cell heterogeneity.     

Medical radioisotope 89Zr production with RFT-30 cyclotron

Journal of Radioanalytical and Nuclear Chemistry - 89Zr is an emerging radionuclide with promising application in nuclear medicine for the non-invasive diagnosis of various cancers with PET...     

Positron annihilation lifetime spectroscopy of advanced reduced-activation alloy (ARAA) in cold‐worked conditions

Journal of Radioanalytical and Nuclear Chemistry - The defects due to cold-rolling deformation in the advanced reduced-activation alloy (ARAA) have been analyzed using positron annihilation...     

碳掺杂六方氮化硼/二硫化钼吸附还原六价铬和助催化降解有机污染物

针对二硫化钼(MoS₂)因易团聚导致去除六价铬[Cr(Ⅵ)]容量低的问题, 利用六方氮化硼(BN)良好的吸附性和化学稳定性, 以多巴胺作为BN改性剂, 通过煅烧法和水热法制得碳掺杂六方氮化硼(c-BN)负载MoS₂纳米复合材料(c-BN@MoS₂). 研究了室温条件下c-BN@MoS₂对Cr(Ⅵ)的吸附还原和助催化降解有机污染物的性能. 实验结果表明, c-BN@MoS₂在40 min内对50 mg/L的Cr(Ⅵ)吸附还原去除率高达95%以上, 且以将 Cr(Ⅵ)还原至Cr(Ⅲ)为主, 在pH值为2、 温度为25 ℃条件下去除Cr(Ⅵ)最大容量可达401 mg/g, 显著高于 MoS₂(98 mg/g). 分析显示, c-BN不仅提高了MoS₂的平均孔径, 还可促进MoS₂生成金属特性的1T相, 有利于吸附Cr(Ⅵ)和加快氧化还原过程中的电子转移. 在Fe²⁺/PMS(过一硫酸氢盐)催化体系加入c-BN@MoS₂, 该体系对磺胺甲恶唑的降解性能明显增强, 其反应速率常数提高3倍, 这主要归因于c-BN@MoS₂明显加快了Fe³⁺到Fe²⁺的转变, 导致更多?OH产生, 达到增强降解污染物的目标.     

C2轴手性双胍催化叶立德和不饱和吖内酯的串联反应研究

本文成功合成了4种基于联二萘酚骨架的手性双胍-酰胺类催化剂,并将其应用于邻羟基苯甲醛亚甲胺叶立德与不饱和吖内酯的1,3-偶极环加成和分子内串联反应。研究表明,在室温下以CHCl_3作为溶剂、轴手性胍(1b,10(mol)%)作为催化剂,反应12h,能以较好的收率(73%～88%)和较高的对映选择性(72%～86%)得到苯并吡喃衍生物。     

Photocatalytic performance of nano-ZnTiO3 decorated with Ag/AgCl nanoparticles for degradation of the organic dyes

Research on Chemical Intermediates - Ag/AgCl/ZnTiO3 nanohybrids were assembled by the photoreduction–precipitation assisted with ultrasonic method. Rhodamine B (RhB), methylene blue (MB) and...     

NiS助催化剂的硫调控光沉积合成及其增强g-C3N4的光催化产氢性能

作为一种非金属聚合半导体,石墨相氮化碳(g-C3N4)具有特殊的能带结构、可见光响应能力以及优良的物理化学性质以及生产成本低等特点,因而已成为目前光催化领域的研究热点.然而,由于g-C3N4被光激发的电子与空穴极易复合,导致g-C3N4材料的光催化性能并不理想.而助剂修饰是实现光生载流子有效分离以提高光催化活性的有效途径.众所周知,贵金属Pt可以作为光催化产氢的反应位点,但高昂的成本限制了它的实际应用.所以,开发高效的非贵金属助剂很有必要.近年来,NiS作为优良的电子助剂在光催化领域受到广泛关注.大量研究表明,NiS可以作为g-C3N4的产氢活性位点用于提高其光催化产氢性能.NiS助剂主要是通过水热、煅烧和液相沉淀的方法修饰在g-C3N4的表面上.相较而言,助剂的光沉积方法具有一些独特的优势,例如节能、环保、简易并且能够实现其原位牢固地沉积在光催化剂的表面.然而g-C3N4光生电子和空穴强还原和氧化能力容易导致像Ni^2+的还原和S^2-的氧化等副反应发生,因此NiS助剂很难光沉积在g-C3N4材料表面.本文采用硫调控的光沉积法成功合成了NiS/g-C3N4光催化材料,该法利用g-C3N4在光照条件下产生的光生电子结合S以及Ni^2+生成NiS,然后原位沉积在g-C3N4表面.由于E0(S/NiS)(0.096 V)比E0(Ni^2+/Ni)(-0.23 V)更正,所以NiS优先原位沉积在g-C3N4表面.因此,硫调控的光沉积法促进了NiS的生成,并抑制了金属Ni等副反应的形成.通过X射线光电子能谱分析NiS/g-C3N4的表面化学态,表明该方法能成功地将NiS修饰在g-C3N4的表面,这也得到透射电镜和高分辨透射电镜结果的证实.光催化产氢的结果表明,NiS/g-C3N4光催化剂实现了良好的光催化性能,其最优产氢速率(244μmol h^?1 g^?1)接近于1 wt%Pt/g-C3N4(316μmol h^?1 g^?1).这是因为硫调控的光沉积法实现NiS助剂在g-C3N4表面的修饰,从而促进光生电子与空穴的有效分离,进而提高光催化制氢效率.此外,在该方法中,NiS的形成通常在g-C3N4光生电子的表面传输位点上,因此也能够使NiS提供更多的活性位点以提高界面产氢催化反应速率.电化学表征结果也进一步证明NiS/g-C3N4光催化剂加快了电子与空穴的分离和转移.更重要的是,这种简易且通用的方法还可以实现CoSx,CuSx,AgSx对g-C3N4的助剂修饰,并且都提高了g-C3N4的光催化产氢性能,表明该方法具有一定的普适性,为高效光催化材料的合成提供了新的思路.     

Tris(pentafluoroethyl)silanol Derivatives and the Lewis Amphoteric Tris(pentafluoroethyl)silanolate Anion, [Si(C2F5)3O]−

While alkyl-substituted siloxanes are widely known, virtually nothing is known about perfluoroalkyl siloxanes and their congener species, the silanols and silanolates. We recently reported on the tris(pentafluoroethyl)silanide ion, [Si(C₂F₅)₃]⁻, which features Lewis amphoteric character deriving from the pentafluoroethyl substituents and their strong electron-withdrawing properties. Transferring this knowledge, we investigated the Lewis amphoteric behavior of the tris(pentafluoroethyl)silanolate, [Si(C₂F₅)₃O]⁻. In order to examine such Lewis amphoteric behavior, we first developed a strategy for the synthesis of the corresponding silanol Si(C₂F₅)₃OH, which readily condenses at room temperature to the hexakis(pentafluoroethyl)disiloxane, (C₂F₅)₃SiOSi(C₂F₅)₃. Deprotonation of Si(C₂F₅)₃OH employing a sterically demanding phosphazene base allows the characterization of the first example of a dimeric triorganosilanolate: the dianionic hexakis(pentafluoroethyl)disilanolate, [{Si(C₂F₅)₃O}₂]²⁻, implies Lewis amphoteric character of the monomeric [Si(C₂F₅)₃O]⁻ anion.     

NiFe2O4对刚果红的光催化降解性能研究

采用水热法合成了尖晶石型NiFe₂O₄,并利用X射线粉末衍射仪对其物相进行了表征,利用紫外-可见分光光度计对其光催化降解刚果红的性能进行了研究。以刚果红为光催化降解底物,探究了刚果红初始浓度、催化剂用量、溶液pH、不同光源等因素对NiFe₂O₄光催化降解刚果红活性的影响。结果表明,当刚果红溶液浓度为20 mg/L、催化剂NiFe₂O₄的用量为0.065 g、pH 2~10、在太阳光下照射480 min时,刚果红的降解率高达99%以上,催化剂性能稳定,适合处理刚果红类有机污染物。