Bayesian Object Identification: Variants

We present a Bayesian theory of object identification. Here, identifying an object means selecting a particular observation from a group of observations (variants), this observation (the regular variant) being characterized by a distributional model. In this sense, object identification means assigning a given model to one of several observations. Often, it is the statistical model of the regular variant, only, that is known. We study an estimator which relies essentially on this model and not on the characteristics of the “irregular” variants. In particular, we investigate under what conditions this variant selector is optimal. It turns out that there is a close relationship with exchangeability and Markovian reversibility. We finally apply our theory to the case of irregular variants generated from the regular variant by a Gaussian linear model.     

Effects of Processing Parameters on Microstructure and Properties of Nanoscale ZrC/ZrB2 Multilayered Coatings

ZrC/ZrB2 multilayered coatings with bilayer periods of 3.5-40nm are synthesized by rf magnetron sputtering. Analyses of x-ray diffraction, scanning electron microscopy and nanoindentation indicate that multilayered coatings possess much higher hardness and greater fracture resistance than monolithic ZrC and ZrB2 coatings. A maximum hardness （41.TCPa） and a critical fracture load （73.7mN） are observed in the multilayer with A = 32 nm deposited at the substrate bias -40 V. Higher residual stress built in the ZrC layer can be released by periodic insertion of ZrB2 into the ZrC layer. A clear multilayered structure with mixed ZrB2（001）, ZrB2 （002） and ZrC （111） orientations should be responsible for the enhanced mechanical properties.     

On the concentration and determination of plutonium in natural waters by adsorption on MnO2 filters

A new method of analysis of the efficiency of four filters of MnO₂ in series which takes into account the reactions induced in plutonium by the sorbent is described. The system of differential equations describing the behaviour of plutonium in water as it passes through the filters is solved and the parameters of the filters are determined for a best fitting of the solutions corresponding to the experimental uncertainties. The method is checked by numerical simulation and then applied to water solutions with a known plutonium concentration and to some experimental results given by other authors. In all occassions the results are consistent with the possibility of determining the contents of plutonium in sea and continental waters with uncertainties of the order of 10%.     

Preconcentration of trace antimony in tap and sea water on activated alumina. Determination by graphite furnace atomic absorption spectrometry

Summary A method is described for antimony preconcentration based on retention on a column of activated alumina. Recovery is 80% when no pH-control and 4 mol/l HCl as eluent are used. The preconcentration factor is 400. The method was applied to the determination of antimony in spiked tap and sea water. The analytical performance of the method is discussed.     

Improvement of the properties of polyarylate reinforced with liquid crystalline polymers

Blends of polyarylate of bisphenol A, PAr, with two commercial main chain liquid crystalline polymers, Vectra A950 and Vectra B950, are studied. From dynamic viscoelastic measurements it is deduced that both systems (PAr/Vectra A950 and PAr/Vectra B950) are immiscible and scanning electron microscopy (SEM) micrographs show the presence of spherical domains of the liquid crystalline polymer when PAr constitutes the matrix. Extrusion capillary measurements reveal that, under conditions of temperature and shear rate similar to those of processing, the viscosity is reduced to approximately 10% of its value when the content of liquid crystalline polymer is only 20%. This great improvement of the rheological properties is observed in both PAr/Vectra A950 and PAr/Vectra B950 blends. The effect of draw ratio on Young's modulus for different compositions is also analyzed, pointing out the reinforcing action of both liquid crystalline polymers on polyarylate: for instance, 20% of Vectra B950 in the blend gives rise to a 700% increase of the modulus of fibres prepared at a draw ratio of 50. SEM of the extrudates reveals that the spherical domains are elongated at the entrance of the capillary giving rise to a microfibrillar morphology which is related to the excellent rheological and mechanical properties of the blends.     

General base catalysis in the decomposition of N-Cl-Valine in aqueous solution

This article analyzes the kinetics of the decomposition of N-Cl-Valine in aqueous solution, which is formed rapidly by chlorination of Valine with sodium hypochlorite. A general-base catalyzed process not yet described is reported. The experimental evidence shows two competitive decomposition paths: an unimolecular concerted fragmentation process (k = (1.8 ± 0.1) · 10^?4 s^?1 at 298 K) and the other one is an E2 elimination process whose importance increases with pH and depends on the nature and the concentration of the bases present in the medium. © 1994 John Wiley & Sons, Inc.     

多功能旋流燃烧器的工业性试验研究

秦皇岛热电厂2＃锅炉燃烧不稳定、燃烧效率低等问题主要是由于燃烧器的一次风管道结构不合理造成的。本文采用多功能旋流燃烧器的设计思想对旋流燃烧器进行了技术改造和工业性试验研究。结果表明,改造后的旋流燃烧器其着火点提前,并且仅改造6只主力燃烧器就可以使锅炉在50％负荷时达到不投油而稳定燃烧,排烟温度、飞灰含碳量和NOx排放量明显下降。     

巯基乙酸锑配合物的合成与X射线粉末衍射数据指标化

一些锑和铋的配合物可以应用于医药研究[1,2 ] ,已合成了许多锑的有机配体配合物[3～ 7] ,但其中大多数没有生物活性。因此 ,研究锑或铋离子的配合物不仅对主族元素化学、生物无机化学而且对医药都有着非常重要的意义。我们用三氯化锑与巯基乙酸液相反应法合成的二巯基乙酸锑 (Ⅲ)配合物 ,其组成为ＨＳｂ(ＳＣＨ2 ＣＯＯ) 2 ,用Ｘ射线粉末多晶衍射数据指标化来研究配合物晶体结构[8] 。1　实验部分1 1　仪器与试剂ＥＡ - 1 1 0 6型元素分析仪 (意大利卡拉欧巴公司制造 ) ,Ｄ Ｍａｘ -ＹＢ型多晶Ｘ射线粉末衍射仪(日本理学 ,ＣｕＫα射线 ,…     

Resolution of binary mixtures of cephalothin and clavulanic acid by using first derivative spectrophotometry

First-derivative spectrophotometric method with a “zero-crossing” technique of measurement has been used for the quantification of two-components mixtures of cephalothin and clavulanic acid. As the absorption bands of these drugs overlap, both direct and derivative spectrophotometric methods have been investigated and evaluated by a rigorous statistical analysis of the experimental data. The first-derivative spectrophotometric method was found to be more accurate, direct and reproducible. Beer's law was valid over the concentration range 2.0–28.0 mg/l for both compounds. The detection limits of cephalothin and clavulanic acid, at a 0.05 level of significance, were calculated to be 0.13 and 0.15 mg/l. The method was applied for determining these antibiotics in mixtures, some of them containing inject-able dosage forms of cephalothin, and so to determine both compounds in saline and glucosed physiological sera.     

大面积玻璃RPC模型与性能测试

介绍了可用于粒子探测的大面积玻璃高阻板探测器RPC(Resistive Plate Chamber).使用两块间隔2mm的普通浮法玻璃作为电极,其中充入流动的混合气体(氩气+异丁烷+F134A),工作高压约9600V;性能测试结果,其单室效率可达97%,时间分辨可达到1.8ns.