PtSn/Al2O3/MCM-41催化剂的丙烷脱氢催化性能

用微型催化反应装置评价,并结合X射线粉末衍射(XRD)、表面积和孔结构测试、程序升温还原(TPR)、氢化学吸附和热重分析等方法研究了负载型PtSn/γ-Al2O3,PtSn/MCM-41和PtSn/Al2O3/MCM-41催化剂的丙烷脱氢反应催化性能.发现PtSn/Al2O3/MCM-41催化剂具有较PtSn/MCM-41催化剂高的丙烷脱氢反应活性和较PtSn/γ-Al2O3催化剂高的反应稳定性.实验结果表明,纯硅MCM-41载体表面的锡物种因与载体相互作用较弱故易被还原,导致铂金属分散度和催化剂的丙烷脱氢活性较低.用Al2O3修饰MCM-41可以增强Sn物种与Al2O3/MCM-41载体之间的相互作用,提高PtSn/Al2O3/MCM-41催化剂铂金属分散度和丙烷脱氢催化活性.并且,积炭后的PtSn/Al2O3/MCM-41催化剂具有较高的铂金属表面裸露度,故具有较高的丙烷脱氢反应稳定性.PtSn/Al2O3/MCM-41催化剂优良的丙烷脱氢催化性能町能不仅与Sn-载体Al2O3/MCM-41较强的相互作用有关,而且与Al2O3/MCM-41载体的介孔结构有关.     

含CL-20的改性双基推进剂的热行为及非等温反应动力学

用DSC和TG方法研究了含六硝基六氮杂异伍兹烷(CL-20)的改性双基推进剂在常压(0.1 MPa)和高压(4和7 MPa)下的热行为和高压下的热分解反应动力学. 结果表明, 该推进剂常压下DSC曲线有3个放热峰, 相应TG曲线有3个失重过程; 而高压下DSC曲线只有一个放热峰, 高压下放热峰的峰温随加热速率增大而升高. 高压下该推进剂放热分解反应机理和反应动力学参数受测试环境压强影响较弱, 反应机理是随机成核和随后生长, 放热分解反应的动力学方程可以表示为, 4 MPa时, dα/dt=1014.5(1-α)[-ln(1-α)]1/3e-17981.7/T; 7 MPa时, dα/dt=1014.7(1-α)·[-ln(1-α)]1/3e-18138.1/T.     

离子液体中钴的电沉积行为

在含有氯化钴的室温离子液体氯化1-甲基-3-乙基咪唑(EMIC)和乙二醇(EG)体系中研究了金属钴的电沉积. 循环伏安法测试表明, 在EMIC-CoCl2熔盐中, 乙二醇的加入促进了EMIC的解离, 从而使氧化还原电流增大, 在EMIC-CoCl2-EG体系中钴的电沉积是受扩散控制的非可逆电极过程, 在该电解液体系中, Co(II)在Pt电极上的传递系数α为0.30, 扩散系数D0为4.16×10^-6 cm·s^-1; 计时电流法研究表明, 钴在铂电极上的电结晶过程符合三维连续成核的生长机理; 场发射扫描电子显微镜(FE-SEM)观察镀层的微观形貌显示, 金属钴的结晶细小. XRD分析证实, 镀层为纯钴, 沉积的钴是晶态和微晶态的混合物, 并且晶粒尺寸为纳米级.     

利用模板法制备Ag纳米线

利用阳极氧化铝（AAO）作为模板,制备出高定向的Ag纳米线．Ag纳米线的形貌由环境扫描电镜证实,并通过X-射线能谱（EDX）、X-射线粉末衍射谱（XRD）测试手段进行了表征．     

Study on Ni/C catalysts for vapor phase carbonylation of ethanol

Activated carbon-supported Ni catalysts for vapor phase carbonylation of ethanol to propionic acid in the presence of ethyl iodide as promoter were investigated. Under optimum reaction conditions, the conversions of carbon monoxide and ethanol were measured to be 81.4% and 98.4%, respectively, while the selectivity for propionic acid was found to be 98.65%. The catalyst was stable within 48 h on stream. XRD and XPS methods were used to characterize the structures and surface properties of the fresh and tested catalysts. The characterization results indicated that aggregation of nickel particles and formation of nickel iodide on the catalyst surface should be responsible for the deactivation of the catalysts.     

Strategies for synthesis of adducts of omicron-quinone metabolites of carcinogenic polycyclic aromatic hydrocarbons with 2'-deoxyribonucleosides

Polycyclic aromatic hydrocarbons (PAHs) are major environmental carcinogens produced in the combustion of fossil fuels, tobacco, and other organic matter. Current evidence indicates that PAHs are transformed enzymatically to active metabolites that react with DNA to form adducts that result in mutations. Three activation pathways have been proposed: the diol epoxide path, the radical-cation path, and the quinone path. The latter involves aldo-keto reductase mediated oxidation of PAH dihydrodiol metabolites to catechols that enter into redox cycles with quinones. This results in generation of reactive oxygen species (ROS) that attack DNA, and the PAH quinones also react with DNA to form adducts. Several strategies for synthesis of the stable adducts formed by the o-quinone metabolites of carcinogenic PAHs with 2'-deoxyribonucleosides were investigated and compared. The PAH quinones studied were benz[a]anthracene-3,4-dione and its 7-methyl- and 7,12-dimethyl- derivatives. The parent PAHs represent a range of carcinogenicity from inactive to highly potent. Two synthetic methods were devised that differ in the catalyst employed, Pd(OAc)(2) or CuI. The Pd-mediated method involved coupling a protected amino-catechol PAH derivative with a halo-2'-deoxyribonucleoside. The copper-mediated method entailed reaction of a halo-PAH catechol derivative with a 2'-deoxyribonucleoside. Adducts of benz[a]anthracene-3,4-dione (and its 7-methyl- and 7,12-dimethyl- derivatives) with 2'-deoxyadenosine and 2'-deoxyguanosine were prepared by these methods. Availability of adducts of these types through synthesis makes possible for the first time biological studies to determine the role of these adducts in tumorigenesis. The copper-mediated method offers advantages of economy, adaptability to large-scale preparation, utility for synthesis of (13)C- or (15)N-labeled analogues, and nonformation of bis-adducts as secondary products.     

不同部位人体气味的分析研究

运用SPME-GC/MS法对同一个体腋窝部、手部和足部的人体气味样品进行了采样分析,通过比较3个部位人体气味样品色谱图中共有成分相对峰面积比和非共有成分,结合使用相似度法对3个部位的人体气味进行了比较分析,三者具有较高的相似度,但仍存在一些细微的差别。     

Approaches to improving critical current density of YBCO superconducting thick films deposited by electrophoresis

The irreversibility field (Hirr) of Y-based superconductor is much higher than that of Bi-based superconductor. Y-based superconductor is capable of maintaining stable electrical currents in high magnetic field and electric field, so it is a better suited mate-rial for electric-current applications. Commonly, the Y-based tapes comprise a YBCO thick film deposited on a flexible substrate, typically with an intermediate buffer layer, and an overcoat of noble metal. In this process, the interm…     

毫米波回旋速调管磁控注入电子枪模拟计算

介绍了毫米波回旋速调管磁控注入电子枪的结构与特点。电子枪提供的电子束流性能直接影响到回旋速调管的总体参数,为保证整管的效率和输出功率,利用电子枪模拟程序对电子轨迹进行模拟计算,研究了电极形状、磁场分布以及电子轨迹与电子注参量的影响,并为磁控注入电子枪的设计提供了理论依据。     

聚(ε-己内酯)薄膜结晶形貌及分子取向研究

用匀胶机通过溶液铸膜方法在硅片和铝箔基板上分别制备具有不同厚度的聚(ε-己内酯)(PCL)薄膜. 通过原子力显微镜(AFM)和偏光衰减全反射傅里叶红外光谱(ATR-FTIR)对薄膜中PCL的结晶形貌、 片晶生长方式及分子链取向进行了研究. AFM结果表明, 在200 nm或更厚的薄膜中, PCL主要以侧立(edge-on)片晶的方式生长; 对于厚度小于200 nm的薄膜, PCL片晶更倾向于以平躺(flat-on)的方式生长. 这种片晶生长方式的改变在硅片和铝箔基板上都表现出同样的倾向. 此外, 在15 nm或更薄的薄膜中, PCL结晶由通常的球晶结构变为树枝状晶体. 偏光ATR-FTIR结果表明, 当膜厚小于200 nm时, 薄膜结晶中PCL分子链沿垂直于基板表面方向取向, 并且膜越薄, 取向程度越高, 与AFM的观测结果一致.