金属-有机骨架材料在样品预处理中的应用

金属-有机骨架材料(Metal-organic frameworks,MOFs)具有超大的比表面积和孔容积、可调的孔径和拓扑结构、良好的热稳定性等优点,因而被广泛用于气体储存、催化、吸附和分离等领域。近年来,以MOFs为吸附剂的样品预处理研究已引起广泛关注。本文综述了近7年来MOFs应用于样品预处理,如采样、固相萃取和固相微萃取等的研究进展,并对这一领域进行了展望。     

液相色谱-串联质谱法快速同时测定婴幼儿配方乳粉中氯霉素、三聚氰胺、甲硝唑和洛硝达唑

建立了婴幼儿配方乳粉中三聚氰胺、氯霉素、甲硝唑和洛硝达唑残留的高效液相色谱-串联四极杆质谱联用测定方法.样品经碱性乙腈提取,以MGⅢ-C18色谱柱(150 mm× 2.1 mm,5 μm)分离,流动相为60 mmol/L乙酸铵溶液(含0.4‰甲酸)和甲醇,梯度洗脱,流速为0.25 mL/min.采用多反应监测正离子或负离子模式,可以同时对婴幼儿配方乳粉中的三聚氰胺、氯霉素、甲硝唑和洛硝达唑进行快速定性和定量测定.在优化条件下,4种化合物检出限为0.3 ～ 50.0μg/kg,方法回收率为61.4％ ～ 96.2％,相对标准偏差(RSD)为1.8％ ～9.8％.采用本方法测定了多种市售婴幼儿配方奶粉.本方法操作简单、测定结果准确,可用于婴幼儿配方奶粉中三聚氰胺、氯霉素、甲硝唑和洛硝达唑残留的同时快速测定.     

体积排阻色谱-电感耦合等离子体质谱分析富硒大米含硒蛋白组成

建立体积排阻色谱-电感耦合等离子体质谱(SEC-HPLC-ICP-MS)联用技术分析富硒大米含硒蛋白组成方法。通过水提、盐提、碱提和醇提方法提取,并用丙酮沉淀蛋白,硒的回收率分别为9.6%,16.8%,48.2%和14.9%,纯化后的蛋白结合硒的量由大到小依次为碱溶谷蛋白>球蛋白>醇溶蛋白>清蛋白。蛋白液经SEC-HPLC-ICP-MS检测,通过蛋白色谱峰(λ=280 nm)和ICP-MS硒峰(78Se)对比分析,利用分子量标准曲线测定出4类蛋白中含硒蛋白的分子量。结果表明,富硒大米中清蛋白和醇溶蛋白并不是硒的主要存在蛋白。硒主要存在于>7 kDa的碱溶谷蛋白和球蛋白,其中碱溶含硒蛋白主要组分F1分子量为199.8 kDa。     

钯氮共掺杂TiO2的制备与表征及其可见光催化活性

在空气气氛和N₂中热处理表面均匀分散有尿素和氯化钯的纳米管钛酸,制备了两个系列Pd/N共掺杂的TiO₂光催化剂,并对所得样品进行了X射线衍射、透射电镜、X射线光电子能谱、紫外-可见漫反射光谱、荧光光谱和电子自旋共振等表征.结果表明,焙烧气氛对样品的形貌、晶体结构、光谱吸收、生成的氧空位浓度和可见光光催化性能的影响很大,其中在空气气氛中制备的样品光催化性能优于在N₂中制备的样品.在可见光(λ≥420nm)照射下,以丙烯为模型污染物考察了样品的光催化活性,发现在空气中400℃下焙烧的样品具有最佳的可见光催化活性.另外,讨论了Pd/N共掺杂TiO₂光催化剂具有可见光响应的机理,认为掺杂的Pd/N元素和制备过程中生成的氧空位是影响可见光催化性能的重要因素.     

介孔Co-Al2O3催化剂上甲烷部分氧化制合成气

采用一锅法制备了介孔Co-Al2O3催化剂,并首次用于甲烷部分氧化制合成气反应. 结果表明,与普通浸渍法相比,一锅法制备的Co-Al2O3催化剂表现出更为优异的催化性能. 合成的介孔Co-Al2O3催化剂具有大的比表面积和孔体积,以及规整有序的六方介孔孔道,Co物种高度分散,从而导致还原后高的金属分散度,而介孔孔道对金属纳米颗粒的约束作用可有效增强金属的抗烧结能力.     

催化臭氧氧化降解邻苯二甲酸二甲酯中催化剂构效关系

采用传统焙烧和微波辐射制备了不同活性炭 (AC) 负载 Ru 催化剂, 并用于催化臭氧氧化降解邻苯二甲酸二甲酯 (DMP) 反应中, 探讨了催化剂的构效关系. 结果表明, 所有 AC 和催化剂均能提高臭氧氧化 DMP 过程中 TOC (总有机碳) 去除率, 其活性顺序为 Ru/coal-AC > nutshell-AC > Ru/nutshell-AC > Ru/coconut-AC ≈ coal-AC > coconut-AC. 负载的 Ru 颗粒扩散到 AC 大孔中, 增加了反应的传质阻力, 使得反应物与 AC 内表面的活性位和金属 Ru 的接触机会减少, 这是 Ru/nutshell-AC 和 Ru/coconut-AC 活性低于 Ru/coal-AC 的一个原因; 催化剂表面 Ru 分散度也是导致其活性差别的原因之一. 微波加热引起 nutshell-AC 表面活性官能团发生变化, 从而导致其负载的 Ru 催化活性降低. 相对于传统焙烧, 微波辐射热处理能够提高 coal-AC 表面 Ru 的分散度, 从而提高催化剂活性.     

Syntheses and Crystal Structures of Two Tin(Ⅳ) Complexes with Aminosilane Bearing Ligand

Aminosilane bearing bulky substituents on nitrogen: LH2(L=Me2Si(NDipp-)2 , Dipp=2,6-diisopropylphenyl) was reacted with BuLi in toluene. The resulting bulky chelating dianion Me2Si(NDipp-)2 was used to synthesize the unusual spirocyclic heterotriatomic complex [Me2Si(NDipp)2]2Sn (1) by its reaction with SnCl4 and the bulky heterotriatomic complex Me2Si(NDipp)2SnPh2 (2) with Ph2SnCl2.1 belongs to the monoclinic system, space group P21/n with a=13.193(2), b=20.663(3), c=20.403(3), β=99.954(2)o, V=5478.3(15)3 , C55H85.5N4Si2Sn, Mr=977.64, Z=4, Dc=1.185Mg/m3 , μ(MoKα)=0.547mm-1 , F(000)=2086, S=1.000, the final R=0.0614 and wR=0.1322 for 14446 observed reflections (I2σ(I)) and R=0.0797 and wR=0.1456 for all data. 2 belongs to the triclinic system, space group Pī with a=10.36(15), b=13.204(7), c=14.363(7), α=90.214(10), β=106.182(7), γ=109.854(8)o, V=1764.4(15)3 , C38H50N2SiSn, Mr=681.58, Z=2, Dc=1.283 Mg/m3 , μ(MoKα)=0.785 mm-1 , F(000)=712, S=1.002, the final R=0.0498 and wR=0.0955 for 7533 observed reflections (I2σ(I)) and R=0.0676 and wR=0.1018 for all data. In the structure of 1, the tin atom is located in the spirocyclic center of the two fused four-membered SnN 2 Si rings. The two complexes were characterized by 1H NMR, elemental analysis, and single-crystal X-ray structural analysis.     

A Trinuclear Ni(Ⅱ) Mixed-ligand Complex Containing Pentadentate N-butylsalicylhydrazide and Monodentate Imidazole:Synthesis, Characterization and Crystal Structure

A novel trinuclear nickel(Ⅱ) complex [Ni3(bushz)2(Himdz)2(H2O)2]?2DMF (1, bushz=N-butylsalicylhydrazide, Himdz=imidazole, DMF=N,N-dimethyl-formamide) has been synthesized and characterized by X-ray single-crystal diffraction characterization. Complex 1 crystallizes in the monoclinic system, space group P21/c with a=7.706(7), b=14.882(6), c=18.639(6) , β=108.08(2)o, V=2032(1) 3, Dc=1.525 g/cm3, Mr=932.95, Z=2, F(000)=972, μ=1.442 mm-1, the final R=0.0359 and wR=0.0771. The three nickel(Ⅱ) atoms in 1 are arranged in a strictly linear structure and exhibit alternating square-planar and octahedral geometries. The complex is connected to form a supramolecule with an infinite three-dimensional network through intermolecular hydrogen bonds. The electrochemical studies reveal that redox of Ni3+/Ni2+ in the complex is a quasi-reversible process. The thermal stability of the title complex was also studied.     

A 2D Wavy Parquet Architecture Based on the Biphenyl-3,3’,4,4’-tetracarboxylic Acid and Bis(2-benzimidazole)alkanes Ligands

A double-T-shaped ligand (H4BPTC) and bis(2-benzimidazole)alkanes as the spacers have been firstly used to direct the assembly of a 2D coordination polymer with wavy parquet network topology, [Zn(BPTC)0.5(H2C2EIm)(H2O)]n (1, C24H18ZnN4O5, Mr = 507.79, H4BPTC = biphenyl-3,3',4,4'-tetracarboxylic acid, H2C2EIm = 2,2'-(1,2-ethanediyl)-bis(1H-benzi- midazole), which was determined by single-crystal X-ray diffraction analysis. The crystal belongs to the monoclinic system, space group P21/n with a = 1.1844(5), b = 1.4019(5), c = 1.4026(5) nm, β = 108.359(5)°, V = 2.2104(15) nm3, Z = 4, Dc = 1.526 g/cm3, μ(MoKα) = 1.156 mm-1, F(000) = 1040, S = 1.038, the final R = 0.0427 and wR = 0.0793 for 3834 reflections with I > 2σ(I). The compound units are linked through BPTC ligands into a wavilness parquet 2D layer and further connected into a 3D framework via π-π packing interactions between the adjacent H2C2EIm ligands and weak N-H…O hydrogen bonding between uncoordinated carboxylate and the nitrogen atoms of H2C2EIm as well as the free water molecules.