Interaction of Fluorocarbon Containing Hydrophobically Mdified Polyelectrolyte with Nonionic Surfactants

The interaction of fluorocarbon containing hydrophobically modified polyelectrolyte(FMPAANa) with two kinds of nonionic surfactants(hydrogenated and fluorinated)in a semidilute (0.5wt%) aqueous solution had been studied by rheological measurements,Association behavior was found in both systems.The hydrophobic interaction of FMPAANa with fluorinated surfactant(FC171) is much stronger than that with hydrogenated surfactant(NP7.5) at low surfactoant concentrations.The interaction is strengthened by surfactants being added for the density of active junctions increased.Whereas distinct phenomena for FC171 and NP7.5 start to be found as the surfactants added over their respective certain concentration.The interaction of polyelectrolyte with fluorinated surfactant increases dramatical ly while that with hydrogenated surfactant decreases.     

锂离子电池用多孔硅/石墨/碳复合负极材料的研究

在两步高能球磨和酸蚀条件下制得了多孔硅/石墨复合材料，并对其进行碳包覆制成多孔硅/石墨/碳复合材料。通过TEM，SEM等测试手段研究了多孔硅材料的结构。作为锂离子电池负极材料，电化学测试结果表明多孔硅/石墨/碳复合材料相比纳米硅/石墨/碳复合材料有更好的循环稳定性。同时，改变复合体配比、热解碳前驱物、粘结剂种类和用量也会对材料的电化学性能产生较大的影响。其中使用质量分数为10％的LA132粘结剂的电极200次循环以后充电容量保持在649.9 mAh·g^-1，几乎没有衰减。良好的电化学性能主要归因于主活性体-多孔硅颗粒中的纳米孔隙很好地抑制了嵌锂过程中自身的体积膨胀，而且亚微米石墨颗粒和碳的复合也减轻了电极材料的体积效应并改善了其导电性。     

新型二氧化硫被动采样器的研制

研究了一种新型二氧化硫被动采样器。考察了无纺布、定性滤纸和定量滤纸等吸收剂的载体在相同情况下对二氧化硫和二氧化氮的吸收效果 ,对吸收载体进行了优选。并针对低温地区和高温高湿的气候条件 ,确立了以三乙醇胺(TEA)为吸收主体 ,分别以乙二醇、丙三醇为添加剂的吸收体系。     

混合价化合物的研究(Ⅱ)─—电化学及现场光谱电化学方法研究非质子介质中Dawson结构杂多阴离子[HAs_2Mo_(18)O_(62)]~(n-)的电还原性质

以电化学和现场紫外－可见－近红外及现场FTIR光谱电化学方法对Dawson结构杂多阴离子［HAS2Mo18O62］5－在非质子介质（CH3CN）中的电还原过程进行了研究．结果表明，该杂多阴离子在非质子介质中经历4步单电子还原反应，所产生的杂多蓝阴离子在近红外区出现宽广的价间电荷转移吸收带，而红外区Mo＝O端键及Mo—O—Mo桥键的特征吸收峰在还原后均有不同程度的红移．     

钾(Ⅰ)(苯并－15－冠－5)新型配合物的合成及性质

在非水溶剂中合成并－１５－冠－５与碘化钾,硫氰化钾及苦味酸钾形成的三种新型固体配合物,并进行了有关物理,化学性质表征,结果表明,钾（Ⅰ）离子不仅易苯并－１５－冠－５天成常见的１：２夹心式配合物,而且还能生成稳定的１：１型固体配合物。     

Poly（meta-phenylene） Derivative with Rigid Twisted Biphenyl Units in Backbone： Synthesis, Structural Characterization, Photophysical Properties and Electroluminescence

A soluble poly(meta-phenylene)derivative with rigid twisted biphenyl unit was synthesized by the Yamamoto coupling reaction.The polymer is soluble in common organic solvents,and the number-average molecular weight is about 6500.The UV-Vis and quantum chemical calculation indicate that the different conformation segments named "conformers" exist in the polymer backbones;it was also further confirmed by the single crystal X-ray diffraction study of the dimeric model compound.The π-π transition of biphenyl segments of twisted and planar conformations made the polymer exhibit a strong absorption around 256 nm and a weak absorption at about 300 nm.Furthermore,the polymer exhibits a strong UV photoluminescence at 372 nm when the excitation wavelengths are longer than 300 nm.The ultraviolet-emitting electroluminescence(EL)device with the single layer structure shows EL λmax of the derivative at 370 nm.     

A theoretical study of the interactions between N, N-dimethylformamide and aromatic hydrocarbons

The B3LYP and MP2 methods with 6-31G* basis set were used to predict the geometries of N, N-dimethylformamide (DMF) dimer and DMF–aromatic hydrocarbons interaction systems. A total of 10 conformers were obtained with no imaginary frequencies, respectively. The interaction energies of these binary mixtures have been obtained. The analyses of chelpg charge distribution and the atoms in molecules theory (AIM) were used to analyze the nature of the interaction. The results show the presence of hydrogen bonds between DMF and aromatic hydrocarbons. The interaction between DMF and benzonitrile is the strongest with the interaction energy of −21.58 kJ mol⁻¹ (BSSE corrected), and the intensity order of interactions is DMF–benzonitrile: d2 > DMF–DMF: a2 > DMF–toluene: c1 > DMF–benzene: b2.     

MCM-41分子筛负载钼钴系催化剂的噻吩HDS研究

通过氧吸附量、噻吩吸附热及反应速率常数的测定，研究了MoO3/MCM-41、MoO3-CoO(NiO)/MCM-41系列催化剂，发现，对于MoO3/MCM-41催化剂，当MoO3的质量分数（以MCM－41为底数，即MCM－41＝1g时，MoO3含量为0．15g，下同）从15％增加到20％时，其噻吩的加氢硫（HDS）活性增大，至25％时活性下降，所对应的氧吸附量（mL/g催化剂）也是先增大后减少，并且两者有很好的线性对应关系，而且噻吩吸附热则基本保持不变，采用不同的MoO3-CoO(NiO)浸渍顺序制备的MoO3-CoO(NiO)/MCM-41催化剂中，先浸渍CoO(NiO）再浸渍MoO3的催化剂，其噻吩HDS活性明显优于对其它浸渍顺序制备的催化剂，同时催化剂的氧吸附量和噻吩吸附热也最大。     

负载型双噁唑啉催化剂上的不对称Diels-Alder反应

 分别以乙烷桥键磺酸官能化的有机-无机杂化介孔材料、十二钨磷酸铯、活化硅胶以及SBA-15为载体,通过非共价键作用制备了负载型双噁唑啉催化剂,并将该催化剂用于催化3-((E)-2-丁烯酰基)-1,3-噁唑啉-2-酮和环戊二烯的不对称Diels-Alder反应. 研究表明,催化剂的性能取决于载体本身以及载体表面阴离子的性质. 以SBA-15为载体时产物的对映体选择性较低,可归因于载体表面较低的羟基浓度.     

[{Cu(phen)2}(μ‐malato){Cu(phen)(NO3)}](NO3)·4H2O: malate acting as a tetra­dentate and dibridging ligand in a dinuclear copper complex

The crystal structure of the title compound, μ‐2‐hydroxy­butane­dioato‐1κ²O⁴,O^4′:2κ³O¹,O²,O⁴‐nitrato‐2κO‐tris­(1,10‐phen­anthroline)‐1κ⁴N,N′;2κ²N,N′‐dicopper(II) nitrate tetra­hydrate, [Cu₂(C₄H₃O₅)(NO₃)(C₁₂H₈N₂)₃](NO₃)·4H₂O, contains an unsymmetrical dinuclear copper complex with Cu(phen)₂ and Cu(phen)(NO₃) moieties (phen is 1,10‐phenanthroline) bridged by a malate (2‐hydroxy­butane­dioate) ligand, which acts as a double‐bridging and tetra­dentate ligand. As a result of this double‐bridging action, especially the direct coordination of the O atom of one carboxyl­ate group of malate to the two Cu atoms, the Cu⋯Cu distance is only 4.199 (1) Å and the two phen planes are roughly parallel [the shortest inter­planar distance is 3.28 (1) Å], exhibiting an obvious intra­molecular π–π stacking inter­action.