Magnetic properties of the bilayer manganese oxide (Pr0.6La0.4)1.2Sr1.8Mn2O7 under pressure

We investigated the effect of pressure on the magnetic properties of a single crystal of the bilayer manganese oxide (Pr_0.6La_0.4)_1.2Sr_1.8Mn₂O₇ by means of DC magnetization measurements under pressure. The ferromagnetic transition, which is accompanied by a metal-insulator transition, is highly sensitive to pressure. The pressure causes a structural variation, which affects the magnetic properties. We discuss the pressure dependence of the 3d electronic state of the Mn ion in this system.     

Saturation field direction dependence of domain structures in NiFe elements

The domain structures in NiFe elements were studied by magnetic force microscopy measurement and micromagnetic modeling. The remanent states in the elements were dependent on the direction of the saturation field. The “S” and “U” states were observed at remanence by applying the saturation field at different directions. The “S” and “U” states are metastable: magnetic force microscopy tip field-induced switching from the “S” and “U” states to the flux closure configuration was observed.     

Ar-buffer-assisted deposition of Cu13 on Cu(1 1 1) surfaces

In this paper, the deposition of Cu₁₃ onto Cu(1 1 1) surface through argon buffer layers was investigated by molecular dynamics (MD) simulations. The interactions between Cu-Cu, Cu-Ar, and Ar-Ar were described by Finnis-Sinclair (FS) tight-binding potential and L-J potential, respectively. The impact energy was chosen to be 2-6 eV/atom in order to compare with experimental results. It was observed that with Ar-buffer layers, the Cu cluster deposited on the surface may retain its free cluster symmetry (I_h). Whereas, on originally bare Cu surface, the deposited Cu cluster lost its original symmetry completely and was recrystalized to have the same fcc structure as the substrate. The Ar-buffer dissipates most of the translational energy of the incident cluster. Therefore, it prevents the cluster from being overheated upon impinging. Furthermore, the interaction between Ar and Cu benefits the confinement of the cluster structure. Our study shows that with Ar-buffer layers, the lateral spread of deposited clusters is 20% smaller than that on the bare Cu surface. This is consistent with the experimental findings.     

para-Sexiphenyl thin film growth on Cu(1 1 0) and Cu(1 1 0)-(2 × 1)O surfaces

We present a reflectance difference spectroscopy (RDS) study of para-sexiphenyl (p-6P) thin film growth on Cu(1 1 0) and Cu(1 1 0)-(2 × 1)O substrates. The RDS spectra show pronounced anisotropies for p-6P films formed on both substrates at room temperature, demonstrating that the molecules are uniaxially aligned within the films. Based on the RD spectra and the evolution of the optical transitions with p-6P coverage the growth mode on both substrates could be identified. From the dominating RDS feature, assigned to the lowest energy HOMO-LUMO transition, the orientation of the molecular chain can be determined. On Cu(1 1 0), the p-6P molecular chains align in the direction, i.e., along the Cu atomic rows, whereas on the Cu(1 1 0)-(2 × 1)O surface, the molecules are oriented in the orthogonal [0 0 1] direction, i.e., along the “added” Cu-O rows of the Cu(1 1 0)-(2 × 1)O surface. The energetic position and line shape of the main RDS feature differs for the two substrates and varies with p-6P coverage. This fine structure is discussed in terms of different molecular conformations, adlayer structure and vibronic replicas.     

Coverage dependent magnetic properties of Co chain-coated carbon nanotube

Magnetic properties of Co chain-coated carbon nanotube (CNT) were investigated using a first-principles calculation. Binding energy between Co chain and CNT increased with the coverage ratio, and the adsorption of Co chains on CNT enhanced the conductance channel. Total magnetic moment of Co chains coated on CNT increased with the coverage ratio, while the magnetic moment per Co atom decreased due to spin flip of majority spin states in Co atoms. Spin polarization at the Fermi level of the Co chains was calculated to converge to that of bulk fcc Co.     

Low temperature adsorption of oxygen on reduced V2O3(0 0 0 1) surfaces

Well ordered V₂O₃(0 0 0 1) films were prepared on Au(1 1 1) and W(1 1 0) substrates. These films are terminated by a layer of vanadyl groups under typical UHV conditions. Reduction by electron bombardment may remove the oxygen atoms of the vanadyl layer, leading to a surface terminated by vanadium atoms. The interaction of oxygen with the reduced V₂O₃(0 0 0 1) surface has been studied in the temperature range from 80 to 610 K. Thermal desorption spectroscopy (TDS), infrared reflection absorption spectroscopy (IRAS), high resolution electron energy loss spectroscopy (HREELS), X-ray photoelectron spectroscopy (XPS), and density functional theory (DFT) were used to study the adsorbed oxygen species. Low temperature adsorption of oxygen on reduced V₂O₃(0 0 0 1) occurs both dissociatively and molecularly. At 90 K a negatively charged molecular oxygen species is observed. Upon annealing the adsorbed oxygen species dissociates, re-oxidizing the reduced surface by the formation of vanadyl species. Density functional theory was employed to calculate the structure and the vibrational frequencies of the O₂ species on the surface. Using both cluster and periodic models, the surface species could be identified as η²-peroxo () lying flat on surface, bonded to the surface vanadium atoms. Although the O-O vibrational normal mode involves motions almost parallel to the surface, it can be detected by infrared spectroscopy because it is connected with a change of the dipole moment perpendicular to the surface.     

Roles of SiH4 and SiF4 in growth and structural changes of poly-Si films

The structural properties of polycrystalline silicon films, prepared by plasma enhanced chemical vapor deposition system, with different flow rates of SiH₄/SiF₄ mixtures at 300 °C were investigated. This study indicates that the low hydrogen coverage on the growing surface, under optimum fluorine radicals, will be leaded to an improvement of crystallized area as compared with case of high hydrogen coverage surface. Moreover, the studies of the role of SiH₄ and SiF₄ radicals show that the SiH₄ radicals are important in the nucleation and growth of grains. However, SiF₄ radicals are effective in the structural change of grain boundaries regions and by this way, in the present system, establish the growth of grains under the dominant 〈1 1 0〉 direction. The stress investigation indicates that addition of high flow rate of SiF₄ in amorphous film, results in the nearly stress free films. Finally, we found that the changes in g-value reflect the changes in the intrinsic compressive and tensile stress in the both polycrystalline and amorphous silicon films.     

Electronic properties of Au nano-particles supported on stoichiometric and reduced TiO2(1 1 0) substrates

Growth modes and electronic properties were analyzed for Au nano-particles grown on stoichiometric and reduced TiO₂(1 1 0) substrates by medium energy ion scattering (MEIS) and photoelectron spectroscopy(PES) using synchrotron-radiation-light. Initially, two-dimensional islands (2D) with a height of one and two atomic layers grow and higher coverage increases the islands height to form three-dimensional (3D) islands for the stoichiometric TiO₂(1 1 0) substrate. In contrast, 3D islands start to grow from initial stage with a small Au coverage (?0.1 ML, 1 ML = 1.39 × 10¹⁵  atoms/cm²: Au(1 1 1)) probably due to O-vacancies acting as a nucleation site. Above 0.7 ML, all the islands become 3D ones taking a shape of a partial sphere and the Au clusters change to metal for both substrates. We observed the Au 4f and Ti 3p core level shifts together with the valence band spectra. The Ti 3p peak for the O-deficient surface shifts to higher binding energy by 0.25 ± 0.05 eV compared to that for the stoichiometric surface, indicating downward band bending by an electron charge transfer from an O-vacancy induced surface state band to n-type TiO₂ substrate. Higher binding energy shifts of Au 4f peaks observed for both substrates reveal an electron charge transfer from Au to TiO₂ substrates. The work functions of Au nano-particles supported on the stoichiometric and reduced TiO₂ substrates were also determined as a function of Au coverage and explained clearly by the above surface and interface dipoles.     

Transition of 3D to 2D growth modes of InAs grown on GaAs

We report a method to grow thin strain-released InAs layer on GaAs (1 0 0) substrates by molecular beam epitaxy. We have shown that by controlling the growth parameters, a thin 2D InAs layer can be grown during initial stages, which eventually serves as a buffer layer to trap dislocations and epitaxial regrowth of InAs on this buffer results in high crystal quality. The size dependence of the InAs islands formed during initial stages with growth time has been studied by atomic force microscopy. With continuous short-time epitaxial growth during various stages, the InAs growth mode transfers from 3D to 2D. The introduction of dislocations into InAs epitaxial islands and their behavior during initial growth stage has been theoretically studied. The theoretical results are in remarkable agreement with the experimental results and shows that once the film is formed, the film strain is totally relaxed. The 200 nm thick InAs epilayer grown on this buffer shows a narrow X-ray diffraction peak. Such InAs strain-released buffer layer would be useful for regrowth of high In content based materials on top of it for electronics and optoelectronics device applications.     

Study on anti-emission materials for non-emitting grid applications in microwave power tubes

Hafnium and platinum were deposited onto molybdenum grids by ion-beam assisted deposition method. Electron-emission characteristics from molybdenum grids with Hf and Pt films, which were contaminated by active electron-emission substances (Ba, BaO) of the cathode, were measured using analogous diode method. The surfaces of grids were analyzed by X-ray diffraction. The results revealed that the reaction between BaO and Hf formed BaHfO₃ compound, which greatly reduced the accumulation of BaO on the surface and accordingly decreased grid emission. In contrast, Ba were formed by the decomposition of BaO on the surface of Pt film under high temperature and re-evaporated from its surface, which reduced the active electron-emission substances on the surface of the grid and effectively restrained grid emission. Their mechanisms for grid-emission suppression are discussed and a good method to develop new grid-coating materials is suggested.