Metallchelate mit Acetophenon-Benzoylhydrazon und Acetophenon-Salicoylhydrazon

The stoichiometry and structure of acetophenone benzoylhydrazone and acetophenone salicoylhydrazone chelates with some divalent metal ions are studied by conductometric titration and visible and infra-red absorption spectrophotometry. The results are supported by analysis of the solid complexes. The infra-red study revealed that coordination occurs through C=O and C=N groups. The shift in the C=O and C=N bands is utilised for the determination of bond lengths.     

On-line sorbent extraction, preconcentration and determination of lead by atomic absorption spectrometry

A method for the quantitative preconcentration of lead based on an existing batch process was developed for implementation in a flow system including a flame AAS detector. Lead can be quantitatively preconcentrated as pyrrolidinedithiocarbamate or dithizonate on an activated carbon minicolumn. The chelates are eluted in methyl isobutyl ketone and introduced directly into the nebuliser-burner. An enrichment factor of 50 is typically obtained for a preconcentration time of 2 min (lead can be determined at concentrations between 15 and 400 ng/ml), which results in a throughput of ca. 25 samples per hr. The sensitivity achieved with the two reagents is similar, but the selectivity provided by APDC exceeds that of dithizone. Based on the results obtained in the determination of lead in reference materials (minerals and skim milk), the proposed APDC method is applicable to real samples.     

Chemical ionization mass spectrometry of nitrosamines

The mass spectra of eight nitrosamines have been recorded, with excitation by chemical ionization (CI) and electron impact (EI). Comparison of the intensities of the base peaks under CI and El conditions gives intensity ratios in the range 1.4-1.9 for low resolution measurements and up to 10 for high resolution measurements, confirming the enhanced sensitivity available in the CI mode.     

Mortality reduction in mice administered a single abundant dose of zinc, manganese or magnesium after irradiation by gamma-rays at sublethal doses

Radioprotective effect has been observed in mice which have subcutaneously received a single dose of abundant inorganic zinc or manganese 24 hours before gamma-ray irradiation with a sublethal dose. Mechanism of the radioprotection has been suggested to be an abundant production of metallothionein (MT) induced by the metals. But process of the protection might be more complicated because immunological and hematopoietic functions are remarkably inhibited by the irradiation and many zinc binding-compounds with biological functions are known at present. Furthermore, the effect of these metals has been observed by the administration only before the irradiation. Radioprotective effect was shown in mice which were administered with not only zinc and manganese, but also magnesium. It seems that mechanism of the radioprotection of magnesium is different from that of zinc or manganese since magnesium is not known to induce MT production. It was observed that the relative concentration ratio of radioactivity in tissues and organs at 7th day (after injection of 65Zn) showed a marked difference between in irradiated and non-irradiated mice.     

Dynamics of caged ions in glassy ionic conductors

At sufficiently high frequency and low temperature, the dielectric responses of glassy, crystalline, and molten ionic conductors all invariably exhibit nearly constant loss. This ubiquitous characteristic occurs in the short-time regime when the ions are still caged, indicating that it could be a determining factor of the mobility of the ions in conduction at longer times. An improved understanding of its origin should benefit the research of ion conducting materials for portable energy source as well as the resolution of the fundamental problem of the dynamics of ions. We perform molecular dynamics simulations of glassy lithium metasilicate (Li2SiO3) and find that the length scales of the caged Li+ ions motions are distributed according to a Levy distribution that has a long tail. These results suggest that the nearly constant loss originates from "dynamic anharmonicity" experienced by the moving but caged Li+ ions and provided by the surrounding matrix atoms executing correlated movements. The results pave the way for rigorous treatments of caged ion dynamics by nonlinear Hamiltonian dynamics.     

Determination of lead by selective chelatometric titration with HEDTA after separation as its sulphate by an improved method of precipitation

A selective titrimetric determination of Pb after separation by a modified method of precipitation as its sulphate is proposed. Pb(II), present as the perchlorate, is precipitated by gentle boiling in 3.6M H(2)SO(4) presaturated with PbSO(4) and free from any extraneous anions. The customary time-consuming evaporation to fumes of sulphuric acid is dispensed with. The precipitate is collected, and dissolved in excess of HEDTA, the surplus of which is back-titrated with Zn(II) at pH 5.0-5.5. Use of Catechol Violet and Xylenol Orange as a mixed indicator gives a sharper end-point. The standard deviation of the proposed method for 60 mg of lead is 0.35 mg. The method has been successfully used to determine Pb in non-ferrous alloys.     

Immobilization of amyloglucosidase onto granular chicken bone

Amyloglucosidase was immobilized onto granular chicken bone (BIOBONE?) by noncovalent interactions. The amount of activity bound relative to an equal amount of free enzyme was 13.6 ?0.4%. The estimated specific activity for amyloglucosidase decreased from 75.3?0.8 to 43.5 ?9.6 U/mg protein upon immobilization. TheKm value of the bone-immobilized enzyme using glycogen as substrate increased from 3.04?0.38 mg/mL (free) to 9.04? 1.51 mg/mL (immobilized), butKm showed no change upon immobilization when starches were used as substrates. A decrease in V_max values occurred upon enzyme immobilization for all substrates, but this largely reflected the percentage of enzyme initially bound to the bone. Immobilization also improved enzyme stability in the presence of various additives (e.g., detergent, KC1, and ethanol) or under low or high pH reaction conditions. Bound amyloglucosidase maintained high activity (>90%) following five cycles of continuous use at moderate (23 ?C) and high (55?C) temperatures. Data derived from Lineweaver-Burk and Arrhenius plots indicated that substrate and product diffusion limitation were minimal.     

Polarographic microdetermination of sulphur in organic compounds after oxygen flask combustion

Summary Three polarographic micro-methods are described for the determination of sulphur in organic compounds after oxygen-flask combustion. The products are converted into sulphuric acid by oxidation with hydrogen peroxide, the excess of which is expelled through boiling. The methods are based upon allowing the sulphuric acid to react with an excess of barium iodate or bromate, then recording polarographically the cathodic reduction wave of the iodate or bromate ion. The bromate methods are superior to the iodate method being simpler and more rapid, and the results are correct to within ca. ±0.5%.

---

Zusammenfassung Drei polarographische Mikromethoden zur Bestimmung von Schwefel in organischen Verbindungen nach deren Verbrennung im Sauerstoffkolben wurden beschrieben. Die Verbrennungsprodukte werden durch Oxydation mit Wasserstoffperoxid in Schwefelsäure umgesetzt. Der Überschuß des Oxydationsmittels wird durch Kochen zerstört. Die Schwefelsäure läßt man mit überschüssigem Bariumjodat oder -bromat reagieren und mißt dann polarographisch die kathodische Reduktionswelle des Jodats oder Bromats. Die Bromatmethode ist der Jodatmethode überlegen, da sie einfacher und rascher zu Resultaten führt, die innerhalb ±0,5% korrekt sind.

     

Application of the rotated dropping mercury electrode to the analysis of mixtures of electroactive substances

The use of poylacrylamide is recommended instead of gelatin as an ideal maximum suppressor to be employed with both the rotated dropping mercury electrode (RODE) and conventional dropping electrode (DME). It is retained at the mercury surface over the entire potential range and does not combine with heavy metals. Reproducibility of the measurement of the residual current and that of the limiting current at the RDME were studied, and it was found that accurate determinations of a single constituent (±2%) are possible at concentrations as low as 1 to 2.10^-5M. The variation of the limiting current with potential is much greater at the RDME than at the DME. This effect must be considered in the analysis of a mixture of electroactive species at the RDME. Method have been discussed for making the proper correction for a preceding wave when a limiting current of a mixture of constituents is measured. Because of its high sensitivity and good reproducibility of results, the RDME is recommended for the analysis of solutions containing one or more electroactive species at concentrations less than 10^-4M.     

A simplified sampling technique for use with the Weisz ring oven: application to qualitative analysis of some gold and silver alloys

Up to 100 microg of sample can be collected from gold or silver alloys by rubbing the specimen with the ground hemispherical tip of a 4-mm Pyrex glass rod. Gold alloys are then dissolved in potassium cyanide solution containing hydrogen peroxide; silver alloys are exposed to vapours of nitric acid. Procedures for transfer, ring oven separation and identification of alloy constituents in the sample solutions are described.