Structure and superconductivity in FexCu1−xBa2YCu2O7+y superconductors synthesized by high pressure

Comprehensive studies of X-ray diffraction, oxygen content, superconductivity and Mössbauer effect have been made on Fe_xCu_1−xBa₂YCu₂O_7+y superconductors (0.00≤x≤0.70) synthesized by ambient (AM) and high pressure (HP). Results indicate that all the HP-samples have tetragonal structure, smaller lattice parameter c and unit-cell volume than the AM-samples. The studies of oxygen content, and Mössbauer spectroscopy indicate that the HP-samples have higher oxygen content, carrier concentration and average valence of Fe than the AM-samples. Moreover, for the HP-samples more Fe atoms located in CuO_x chains have fivefold-oxygen coordination. These are important reasons for the enhancement of T_c in the HP-samples.     

Anomalous optical transitions in AlInGaN/GaN heterostructures grown by metalorganic chemical vapor deposition

Using temperature-dependent photoluminescence (PL) measurements, we report a comprehensive study on optical transitions in Al_yIn_xGa_1−x−yN epilayer with target composition, x=0.01 and y=0.07 and varying epilayer thickness of 40, 65 and 100 nm. In these quaternary alloys, we have observed an anomalous PL temperature dependence such as an S-shape band-edge PL peak shift and a W-shape spectral broadening with an increase in temperature. With an increase in excitation power density, the emission peak from the AlInGaN epilayers shows a blue shift at 100 K and a substantial red shift at room temperature. This is attributed to the localization of excitons at the band-tail states at low temperature. Compared to 40 and 65 nm thick epilayers, the initial blue shift observed with low excitation power from 100 nm thick AlInGaN epilayer at room temperature is caused by the existence of deeper localized states due to confinement effects arising from higher In and Al incorporation. The subsequent red shift of the PL peak can be attributed by free motion of delocalized carriers that leads to bandgap renormalization by screening. Due to competing effects of exciton and free carrier recombination processes, such behavior of optical transitions leads to two different values of exponent ‘k’ in the fitting of PL emission intensity as a function of excitation power.     

Growth process and structure of Fe/Si(1 1 1) ultrathin film: Transition from single-domain Fe(1 1 1)/Si(1 1 1) to β-FeSi2

The growth processes and structures of Fe/Si(1 1 1) ultrathin films grown by solid-phase reactive epitaxy were investigated by coaxial impact-collision ion scattering spectroscopy (CAICISS). It has been revealed that the Fe(1 1 1) thin films with a bcc-type structure were epitaxially grown on a Si(1 1 1) crystal, even at room temperature, and formed a single-domain structure: Fe(1 1 1)∥Si(1 1 1). After annealing at above 600 °C, the Fe(1 1 1) films were transformed into β-FeSi₂ via the collapse of the bcc-type structure to an amorphous or polycrystalline structure. On the basis of the thickness dependences of the growth processes, this phenomenon was discussed in terms of the diffusion of Si into Fe thin films.     

水催化脱卤反应:构建每次一个水分子的纳米化学反应体系(英文)

pacc:8240,8760E Acombinedexperimentalandtheoretical studyofthephotochemistryofCHBr3inpurewa terandinacetonitrile/watermixedsolventsisre portedthatelucidatesthereactionsandmecha nismsresponsibleforthephotochemicalconver sionofthehalogenatomsinCHBr3intothre…     

Modulation-free acetylene-stabilized lasers at 1542 nm using modulation transfer spectroscopy

We report frequency stabilization of diode lasers using modulation transfer spectroscopy of an acetylene transition (¹³C₂H₂, ₁+₃, P(16)) at 1542 nm. We realize modulation-free acetylene-stabilized lasers with a frequency stability of about 10^–11 and an absolute frequency accuracy of about 20 kHz.This revised version was published online in March 2005. In the previous version, the published online date was missing     

Semiconductor saturable absorber mirror structures with low saturation fluence

We present two novel semiconductor saturable absorber mirror (SESAM) designs which can exhibit more than ten times lower saturation fluence than classical SESAM devices. Design considerations and characterization data are presented. These devices are particularly suited for passively mode-locked lasers with ultra-high repetition rates.     

Combustion and microexplosion of collision-merged methanol/alkane droplets

The combustion characteristics of freely falling droplets, individually generated by the merging of colliding methanol and alkane droplets, were investigated and compared with those for pure methanol and alkanes. The merging of the nominally immiscible methanol and alkanes was manifested in an apparently adhesive, but unmixed, manner in all test conditions. An air bubble was found to be trapped at the colliding interfaces where they were “adhered,” with the trapping favored for head-on or near head-on collision orientations. The trapped air bubble ostensibly induced heterogeneous nucleation of the methanol, being facilitated by the relatively low limit of superheat of methanol. Consequently, the droplet exploded almost immediately upon ignition, leading to an extremely short overall lifetime. For collision orientations that were more off-centered, bubble trapping and thereby heterogeneous nucleation were not favored. However, delayed, albeit strong, microexplosion occurred through homogeneous nucleation of methanol at the contacting interface. The global burning rate was therefore again augmented. In general, microexplosion was facilitated for high-boiling-point alkanes such as hexadecane and tetradecane. The co-vaporization of methanol and alkane from their respective hemispherical segments constituting the adhered droplet also led to flame colors that were more bluish than yellowish, indicating the reduction of soot from alkane burning in the presence of methanol vapor. In light of the difficulty of forming stable methanol/oil emulsions, the potential of separate injection of oil and methanol in opposed jet arrangement, in direct-injection engines to facilitate collision, is suggested.     

Enhanced third harmonic reflection and diffraction in Silicon on Insulator photonic waveguides

Enhanced third harmonic (TH) generation from Silicon-On-Insulator (SOI) planar waveguides as well as SOI photonic crystal (PhC) slabs is studied in different angular configurations, both in the visible and infrared energy ranges. In the SOI planar waveguide, the multilayer structure causes the optical properties such as TH reflection to be different from those of bulk silicon samples. This behavior is well reproduced by calculations of TH reflectance.Measurements of third-harmonic reflection and diffraction from one-dimensional PhC slabs etched in the SOI waveguide are also reported. The angular positions of TH peaks at various diffraction orders agree well with those calculated from a nonlinear grating equation. Both reflection and diffraction processes contribute to enhanced TH generation efficiency in the PhC slabs.TH reflectance measurements performed on PhC slabs in the near infrared show a resonant interaction between the incident beam and the photonic structure, dependent on the angle of incidence. This leads to a nonlinear conversion efficiency which is strongly enhanced with respect to that of the SOI waveguide, due to the excitation of strong local fields associated with the presence of photonic modes in the PhC slab.     

One-step generation of high-quality squeezed and EPR states in cavity QED

We show how to generate bilinear (quadratic) Hamiltonians in cavity quantum electrodynamics (QED) through the interaction of a single driven three-level atom with two (one) cavity modes. With this scheme it is possible to generate one-mode mesoscopic squeezed superpositions, two-mode entanglements, and two-mode squeezed vacuum states (such the original EPR state), without the need for Ramsey zones and external parametric amplification. The degree of squeezing achieved is up to 99% with currently feasible experimental parameters and the errors due to dissipative mechanisms become practically negligible.     

Measurement of the transverse Doppler shift using a stored relativistic7Li+ ion beam

We have performed for the first time precision spectroscopy on a coasting fast⁷Li⁺ ion beam in a storage ring. The ion beam moving with 6.4% speed of light was first electron cooled and then merged with two counterpropagating laser beams acting on two different hyperfine transitions sharing a common upper level (λ-system). One laser was frequency locked to thea ₃ ¹²⁷J₂ hfs frequency component established as a secondary frequency standard at 514 nm. The second laser was tuned over theλ-resonance, which was recorded relative to¹²⁷J₂ hfs components. This experiment is sensitive to the time dilation in fast moving frames and will lead to new limits for the verification of special relatively. The present status of the experiment and perspectives in accuracy are discussed.