Novel composite anode materials for lithium ion batteries with low sensitivity towards humidity

Graphitic anode materials for lithium ion batteries processed under high humidity conditions show severe performance losses. The sensitivity of these materials towards humidity can be significantly reduced by adsorbing metal ions like silver or copper ions, with subsequent heat treatment of these composites. Results of X-ray photoelectron spectroscopy, high-resolution electron microscopy, thermogravimetry, and differential thermal analysis indicate that the deposited metals exist in metallic and carbide, M_xC (M=Cu or Ag), forms. They remove or cover (i.e. deactivate) active hydrophilic sites at the surface of the graphite. These composites absorb less water during processing. The electrochemical performance, including reversible capacity, coulombic efficiency in the first cycle, and cycling behavior, is markedly improved. This approach provides a potentially powerful method to manufacture lithium ion batteries under less demanding conditions.Presented at the 3rd International Meeting on Advanced Batteries and Accumulators, 16–20 June 2002, Brno, Czech Republic     

Studies of the Methane Steam Reforming Reaction at High Pressure in a Ceramic Membrane Reactor

The effects of temperature and pressure on the steam reforming of methane 3H2+CO) were investigated in a membrane reactor (MR) with a hydrogen permeable membrane. The studies used a novel silica-based membrane prepared by using the chemical vapor deposition (CVD) technique with a permeance for H2 of 6.0×l0-8 mol·m-2·s-1·Pa-1 at 923 K. The results in a packed-bed reactor (PBR) were compared to those of the membrane reactor at various temperatures (773-923 K) and pressures (1-20 atm, 101.3-2026.5 kPa) using a commercial Ni/MgAl2O4 catalyst. The conversion of methane was improved significantly in the MR by the countercurrent removal of hydrogen at all temperatures and allowed product yields higher than the equilibrium to be obtained. Pressure had a positive effect on the hydrogen yield because of the increase in driving force for the permeance of hydrogen. The yield of hydrogen increased with pressure and reached a value of 73×10-6 mol·g-1·s-1 at 2026.5 kPa and 923 K which was higher by 108% than the value of 35×10-6 mol·g-1·s-1 obtained for the equilibrium yield. The results obtained with the silica-based membrane were similar to those obtained with various other membranes as reported in the literature.     

Molecular magnet based on the FeII,III complex with squaric acid

The reaction of Fe^II and Fe^III salts with tetrabutylammonium squarate in an aqueous solution gives rise to a new molecular magnet (T _c = 8.6 K).     

Stereoselective determination of R(-)- and S(+)-MK-571, a leukotriene D4 antagonist, in human plasma by chiral high-performance liquid chromatography.

A stereoselective high-performance liquid chromatographic method that utilizes fluorescence detection was developed for the selective and sensitive quantification of R(-)- and S(+)-enantiomers of MK-571 (1), a potent and specific leukotriene D4 antagonist, in human plasma. Racemic 1 was isolated from the acidified plasma using solid-phase extraction and the resulting residue was successfully reacted with isobutyl chloroformate and R(+)-1-(1-naphthyl)ethylamine in triethylamine-acetonitrile medium to form the diastereomer of each enantiomer. A structural analogue of 1 was used as internal standard. The derivatized sample was dissolved in 1,1,2-trichlorotrifluoroethane and an aliquot was chromatographed on a (R)-urea chiral column using a mobile phase containing 89% triethylamine-pentane (3:1000, v/v), 10% 2-propanol, and 1% acetonitrile at a flow-rate of 1.5 ml/min. The fluorescence response (excitation wavelength, 350 nm; emission wavelength, 410 nm) was linear (r2 greater than 0.999) for concentrations of enantiomers of 1 from 0.05 micrograms/ml, the lowest quantitation limit, up to 2.5 micrograms/ml. Intra-day coefficients of variation at 0.05 microgram/ml were 2.4% for the R(-)-isomer and 2.0% for S(+)-isomer. The corresponding inter-day coefficients of variation for R(-)- and S(+)-1 were 2.6 and 3.6%, respectively. The utility of the methodology was established by analysis of plasma samples from male volunteers receiving single intravenous and oral doses of racemic 1.     

Indomethacin sustained-release suppositories containing sugar ester in polyethylene glycol base

Indomethacin (IM) sustained-release suppositories were prepared by the fusion method using sugar ester and polyethylene glycol 4000 (PEG). The suppositories were evaluated by in vitro release testing, X-ray analysis and in vivo absorption testing in rabbits. X-ray analysis showed that IM was amorphous in PEG-base suppositories. In a release test, slow-release was obtained when the sugar ester content of a suppository was 60%. The IM plasma level following the administration of the suppository was well sustained in the absorption test. The main slow-release mechanism is considered to be the release of IM from the matrix composed of sugar ester and PEG, which is represented by the Higuchi equation. A good correlation between the release test and the absorption test was obtained. It is considered that the amorphous state of IM in this type of sustained-release suppository would enhance the release and absorption of IM in the rectum of the rabbit, whose rectal fluid volume is small.     

Direct coupling of microcolumn liquid chromatography with in-tube solid-phase microextraction for the analysis of antidepressant drugs

The direct coupling of in-tube solid-phase microextraction (in-tube SPME) with microcolumn liquid chromatography (micro-LC) has been investigated for the analysis of antidepressants in human urine. The use of in-tube SPME has been clearly shown to be advantageous for the on-line coupling of the SPME method, as the sample pretreatment technique, with micro-LC as the separation technique. This is because much smaller amounts of the sample solutions, desorption solvents and the mobile phase are required compared with conventional SPME-LC systems. The parameters for preconcentration have been investigated for the extraction capillary with the newly developed 'wire-in-tube' configuration.     

Determination of gentamycin by synchronous derivative fluorimetry

Use of synchronous first-derivative fluorimetry for determination of gentamycin is described. Gentamycin reacts with acetylacetone and formaldehyde in pH 5.6 HOAc/NaOAc buffer solution to form N-gentamyl-2,6-dimethyl-3,5-diacethyl-1,4-dihydropyridine[I] which is a fluorescent substance. Spectra of [I] and the reagent blank can be separated with synchronous derivative fluorimetry, and gentamycin can be determined directly. The synchronous spectral peaks of [I] and the reagent blank are at 434 and 411 nm, respectively. The first-derivative peak of [I] is at 425 nm. Effects of pH, foreign ions, buffer system, and heating time on the determination of gentamycin have been examined. The linear regression equation of the calibration graph is C=0.0513H-0.0416, with a correlation coefficient of linear regression of 0.9978. C means total potency of gentamycin: U ml(-1); H means peak height in the linear regression equation calibration graph. The linear range for the determination of gentamycin is from 0.00 to 3.00 U ml(-1). Recovery is from 95.06 to 112.0%, R.S.D. of 3.8%. The results determined by the fluorimetric method agreed roughly with those by the microbiological method. The method is simple and has low detection limit.     

Reactions of (η6-Arene)tricarbonylchromium Complexes: Hydrogenation,Nitration, and Bromination

In this study, we explore the reactions of coordinated arenes, e.g., hydrogenation, nitration, and bromination, to prepare compounds which are not accessible from conventional organic synthesis. The reaction products formed from reactions with the coordinated and the uncoordinated arenes are compared. The polycyclic aromatic hydrocarbons (PAHs) employed for this study include phenanthrene, methyl- and acetyl-phenanthrene, and benz[a]anthracene (BA), The tricarbonylchromium group demonstrated various characteristics which influence the reactions in this work, such as an electronic effect to deactivate hydrogenation, a steric effect to exhibit, highly positional selective nitration, and a free radical mechanism to direct bromine to attack at the ring coordinated to tricarbonylchromium.     

Double percolation effect on the electrical conductivity of conductive particles filled polymer blends

Electrical conductivity of carbon black (CB) filled polymer blends which are incompatible with each other was studied as a function of the polymer's blend ratio. Transmission electron microscope (TEM) analysis shows that CB distributes unevenly in each component of a polymer blend. TEM photographs of phase structure of solvent extracted HDPE/PMMA blend and solvent extraction experiments of PMMA/PP blend detect the blend ratio at which the structural continuity of filler rich phase is formed. The electrical conductivity of polymer blends is found to be determined by two factors. One is the concentration of CB in the filler rich phase and the other is the structural continuity of this phase. This double percolation affects the conductivity of conductive particle filled polymer blends.     

Liquid chromatographic assay for constituent disaccharides of hyaluronic acid and chondroitin sulphate isomers

An improved high-performance liquid chromatographic (HPLC) method for unsaturated disaccharides prepared from hyaluronic acid and various chondroitin sulphate and dermatan sulphate isomers was developed, which involves an ion-exchange resin prepared from a sulphonated styrene-divinylbenzene copolymer. The retention times of the individual unsaturated disaccharides were unique and reproducible, the disaccharides appearing in the following order: unsaturated non-sulphated disaccharide derived from hyaluronic acid, then unsaturated 6-sulphated, non-sulphated and 4-sulphated disaccharides from chondroitin sulphate isomers. Unsaturated disulphated disaccharide G had a much shorter retention time than the unsaturated non-sulphated disaccharide derived from hyaluronic acid. The contents of these individual unsaturated disaccharides could be determined with similar sensitivities on the basis of their ultraviolet absorbance. Selective and unique retention times and good resolutions were found for various unsaturated disulphated and trisulphated disaccharides. The proposed method can be used to determine various chondroitin sulphate and dermatan sulphate isomers in addition to hyaluronic acid in amounts as small as 100 ng to 8 micrograms. The practicality of this method was verified by its application to the separation and determination of the different types of chondroitin sulphate and dermatan sulphate isomers derived from human arteries in the presence of appreciable amounts of hyaluronic acid.