Binding energy of impurity states in an inverse parabolic quantum well under magnetic field

 We have investigated the effects of the magnetic field which is directed perpendicular to the well on the binding energy of the hydrogenic impurities in an inverse parabolic quantum well (IPQW) with different widths as well as different Al concentrations at the well center. The Al concentration at the barriers was always x_max=0.3. The calculations were performed within the effective mass approximation, using a variational method. We observe that IPQW structure turns into parabolic quantum well with the inversion effect of the magnetic field and donor impurity binding energy in IPQW strongly depends on the magnetic field, Al concentration at the well center and well dimensions.     

Strong temperature effect on X-ray photo-etching of polytetrafluoroethylene using a 10 Hz laser-plasma radiation source based on a gas puff target

The first results of experiments on direct photo-etching of heated PTFE using a 10 Hz X-ray source based on a laser-irradiated gas puff target are presented. X-ray radiation in the wavelength range from 6 to 20 nm was produced as a result of irradiation of a double-stream gas puff target with Nd:YAG laser pulses of energy 0.8 J and time duration 3 ns. The resulting X-ray pulses with energy of about 100–200 mJ were used to irradiate samples of PTFE to create microstructures by direct photo-etching. Strong enhancement of the photo-etching process was observed for samples heated up to 300 °C. PACS 52.38.Ph; 81.65.Cf; 61.82.Pv     

The evolution of magnetic,electrical and structural properties of nanogranular [FeCoBN/SiN]×n thin films

Some results concerning the magnetic, electrical and microstructural properties of multilayer [FeCoBN/Si₃N₄]×n films in view of their utilization for manufacturing thin film magnetic inductors are presented. A comparison between the magnetic, electrical and structural properties of FeCoBN and [FeCoBN/Si₃N₄]×n thin films is also reported. The [FeCoBN/Si₃N₄]×n thin films with the thickness of the FeCoBN layers varied from 10 to 30 nm, exhibit good soft magnetic characteristics and high values for electrical resistivity such as Ms of 172–185 A m²/kg, Hc of 318–1433 A/m and ρ of 82–48×10⁻⁷ Ω m, respectively. These physical properties of the samples are discussed in relation with the microstructure of the multilayer system.     

Comparison of detection efficiencies of negatively charged gold-alkanethiolate-, gold-sulfur- and gold-clusters in ToF-SIMS

In order to improve quantification of high mass ions, the influence of cluster composition on detection efficiencies has been studied using a TOF-SIMS IV with the extended capability of postaccelerating ions up to 20 keV. In this experimental study, we focus on the comparison of detection efficiencies for three types of negatively charged secondary cluster ions: gold-alkanethiolate-clusters (Au_xM_y), gold-sulfur-clusters (Au_xS_y) and gold-clusters (Au_x). The clusters were sputtered from self-assembled monolayers of hexadecanethiols on gold substrates using 10 keV Ar⁺ primary ions. The detection efficiencies were derived on the basis of a function for the secondary electron yield and a fourth-order approximated Poisson probability distribution for electron propagation and amplification within the microchannel plate.In addition to the well-known dependence of detection efficiencies on ion mass and energy, which has already been studied for positively charged ions, we were able to show a similar behaviour for the investigated negatively charged secondary ions. We have observed major variations among the three types of clusters at similar mass and energy as predicted in a theoretical approach. The observed differences are due to the different composition of the investigated clusters which has a major influence on the kinetic ion induced electron emission within the microchannel plate. For the first time it was possible to experimentally verify these predictions for detection efficiencies.     

Synthesis and magnetic properties of multilayer Ni/Cu and NiFe/Cu nanowires

Highly ordered composite nanowires with multilayer Ni/Cu and NiFe/Cu have been fabricated by pulsed electrodeposition into nanoporous alumina membrane. The diameter of wires can be easily varied by pore size of alumina, ranging from 30 to 100 nm. The applied potential and the duration of each potential square pulse determine the thickness of the metal layers. The nanowires have been characterized by transmission electron microscopy (TEM), magnetic force microscopy (MFM), and vibrating sample magnetometer (VSM) measurements. The MFM images indicate that every ferromagnetic layer separated by Cu layer was present as single isolated domain-like magnet. This technique has potential use in the measurement and application of magnetic nanodevices.     

General synchronization dynamics of coupled Van der Pol–Duffing oscillators

This paper considers the general synchronization dynamics of coupled Van der Pol–Duffing oscillators. The linear and nonlinear stability analysis on the synchronization process is derived through the Whittaker method and the Floquet theory in addition to the multiple time scales method. A stability map displaying different dynamical states of the system is performed. Numerical simulation is carried out to support and to complement the accuracy of the analytical treatment.     

Bäcklund Transformation and N-Soliton Solution for the Generalized Nonlinear Schrödinger Equation

For the generalized nonlinear Schrödinger equation, the N-fold Bäcklund transformation is derived. As particular results, the explicit 1-soliton solution is obtained and the interaction of two solitons is discussed.     

Non-destructive analysis of archeological samples by energy-dispersive X-ray fluorescence

Summary A non-destructive method is described for the determination of major and minor constituents in archeological specimens by energy-dispersive X-ray fluorescence. Homogeneity tests are made by measuring at various sites of the specimen. In the same way, mean values are obtained for inhomogeneous specimen without taking samples. For calibration, powder standards are used. In case of the determination of elements with numbers up to 14 (Si) a vacuum chamber is used and the dimensions of the specimens are limited by the dimensions of that vacuum chamber, whereas for the determination of elements from K up to U specimens of any size, form or weight are suitable.

---

Zerstörungsfreie Analyse von archäologischen Proben mit Hilfe der Energie-dispersiven Röntgenfluorescenzanalyse

Zusammenfassung Eine zerstörungsfreie Methode für die Bestimmung von Haupt- und Nebenbestandteilen in archäologischen Proben mit Hilfe der Energie-dispersiven Röntgenfluorescenzanalyse wird beschrieben. Für Homogenitätstests wird an mehreren Stellen der Probe gemessen. In der gleichen Weise werden für inhomogene Proben Mittelwerte erhalten ohne Probenahme. Für die Eichung werden Pulverstandards verwendet. Im Falle der Bestimmung von Elementen mit Ordnungszahlen bis 14 (Si) wird eine Vakuumkammer eingesetzt, und die Dimensionen der Proben sind durch die Dimensionen dieser Vakuumkammer begrenzt, während für die Bestimmung der Elemente K bis U Proben jeder Größe, jeder Form oder jeden Gewichts verwendbar sind.