Generation of red light at 660 nm by frequency doubling a Nd:YAG laser with periodically-poled stoichiometric LiTaO<Subscript>3</Subscript>

High power red light was generated from a periodically-poled stoichiometric LiTaO₃ (PPSLT) by single-pass frequency doubling of a diode-side-pumped, Q-switched Nd:YAG laser at 1319 nm. An average power of 2.4 W of the 660 nm red light was obtained at the fundamental power of ∼5.4 W with the conversion efficiency up to 44.4% and with low fluctuation down to 2%. The high efficiency and stability at the red output indicate that it is a practical method to construct a reliable compact red laser. PACS 42.70.Mp; 42.79.Nv; 42.55.Xi     

Growth of InAs nanostructures on InP using atomic-force nanolithography

Atomic-force nanolithography was used to control the nucleation sites of InAs nanostructures on InP substrates. Indentations with a wide range of dimensions were produced on InP. InAs nanostructures were selectively grown by metal organic vapor phase epitaxy. It is shown that the number of active nucleation sites depends on the normal force applied during nanoindentation. Crystalline defects introduced by nanoindentation are shown to be nucleation sites for these nanostructures. The presence of screw dislocations within the grown nanostructures further supports this observation. PACS 81.07.-b; 68.37.Ps; 81.16.Nd     

Structure and mechanical properties of Al/AlN multilayer with different AlN layer thickness

Nanometer scale Al/AlN multilayers have been prepared by dc magnetron sputtering technique with a columnar target. A set of Al/AlN multilayers with the Al layer thickness of 2.9 nm and the AlN layer thickness variation from 1.13 to 6.81 nm were determined. Low angle X-ray diffraction (LAXRD) was used to analyze the layered structure of multilayers. The phase structure of the coatings was investigated with grazing angle XRD (GAXRD). Mechanical properties of these multilayers were thoroughly studied using a nanoindentation and ball-on-disk micro-tribometer. It was found that the multilayer hardness and reduced modulus showed no strong dependence on the AlN layer thickness. Al2.9 nm/AlN1.13 nm multilayer had more excellent tribological properties than single layers and other proportion multilayers with a lowest friction coefficient of 0.15. And the tribological properties of all the multilayers are superior to the AlN single layer.     

Laser spectroscopy of trapped 7Be and 10Be at a prototype slow RI-beam facility of RIKEN

A next-generation slow radioactive nuclear ion beam facility (SLOWRI) which provides slow, high-purity and small emittance ion beams of all elements is being build as one of the principal facilities at the RIKEN RI-beam factory (RIBF). High energy radioactive ion beams from the projectile fragment separator BigRIPS are thermalized in a large gas catcher cell. The thermalized ions in the gas cell are guided and extracted to a vacuum environment by a combination of dc electric fields and inhomogeneous rf fields (rf carpet ion guide). From there the slow ion beam is delivered via a mass separator and a switchyard to various devices: such as an ion trap, a collinear fast beam apparatus, and a multi-reflection time of flight mass spectrometer. In the R&D works at the present RIKEN facility, an overall efficiency of 5% for a 100A MeV ⁸Li ion beam from the present projectile fragment separator RIPS was achieved and the dependence of the efficiency on the ion beam intensity was investigated. Recently our first spectroscopy experiment at the prototype SLOWI was performed on Be isotopes. Energetic ions of ¹⁰Be and ⁷Be from the RIPS were trapped and laser cooled in a linear rf trap and the specific mass shifts of these isotopes were measured for the first time.     

Hydrothermal synthesis and Magnetocaloric effect of La0.5Ca0.3Sr0.2MnO3

The hydrothermal synthesis and magnetic entropy change for the perovskite manganite La_0.5Ca_0.3Sr_0.2MnO₃ have been studied. The La_0.5Ca_0.3Sr_0.2MnO₃ can be produced as phase-pure, crystalline powders in one step from solutions of metal salts in aqueous potassium hydroxide solution at a temperature of 513 K in 72 h. Scanning electron microscopy shows that the materials are made up of cuboid-shaped particles in typical dimension of 4.0×2.5×1.6 μm. Heat treatment can improve the magnetocaloric effect for the hydrothermal sample. The maximum magnetic entropy change ΔS_M for the as-prepared sample is 0.88 J kg⁻¹ K⁻¹ at 315 K for a magnetic field change of 2.0 T. It increases to 1.52 J kg⁻¹ K⁻¹, near its Curie temperature (317 K) by annealing the sample at 1473 K for 6 h. The hydrothermal synthesis method is a feasible route to prepare high-quality perovskite material for magnetic refrigeration application.     

Correlation of Plasma Sprayed Coating Deposition Efficiency with Volume Flux Measurements by Phase Doppler Anemometry (PDA)

The use of phase-Doppler anemometry (PDA) to characterize the detail in-flight plasma sprayed particle behavior has been demonstrated previously [Ma et al. Plasma Chem Plasma Process 24(1):85; 25(1):56] The present articles shows further that a direct relationship may exist between the PDA measured particle volume flux and the coating microstructure and deposition efficiency (DE). In the situation when the precise particle temperature information is not available, the PDA measured particle volume flux may provide an alternative to predict quantitatively the variation of the coating microstructure and the DE. By monitoring the in-flight particle volume flux variations, instead of the particle velocity, size and temperature individually and simultaneously, the optimal settings of the plasma spraying parameters may also be determined conveniently. However, it is noted that the effective applications of such approach depend largely on the particle surface morphology and the pre-determination of the particle size range.     

The photon two-point function in unitary approximation

The photon two-point function is calculated using the exponential representation for the time-evolution operator taking into account terms up to second order ine in the exponent. The limiting case of vanishing electron mass is examined and it is shown that mass singularities cancel by means of unitarity. Near mass shell the causal Green function exhibits in the limit of vanishing electron mass the expected cut behaviour, off mass shell we recover the result of the usual perturbation theory.     

<Emphasis Type="Italic">Comment on</Emphasis>¶Low temperature specific heat of blue bronze K <Emphasis Type="Bold">0.30</Emphasis>MoO <Emphasis Type="Bold">3</Emphasis>, by J. Odin,J.C. Lasjaunias,K. Biljaković, K. Hasselbach,and P. Monceau

Eur. Phys. J. B 24, 315 (2001) Here we comment on a recently published paper on the presence of a phason contribution in the low temperature heat capacity data of the charge-density-wave compounds K_0.3MoO₃ and (TaSe₄)₂I. We have shown that the anomaly in the C _P / T ³ data reported by Odin et al. is straightforwardly interpreted in terms of low energy phonon modes resulting from the peculiar topology of these compounds. Received 21 February 2002 Published online 19 July 2002     

Asymmetry in the Multiprotein Systems of Molecular Biology

Signaling in living systems needs to achieve high specificity, to be reversible, and to achieve high signal to noise. Signaling mediated by multiprotein systems has evolved that avoids the requirement for high-affinity binary complexes that would be difficult to reverse and which, in the overcrowded cell, would lead to excessive noise in the system. Symmetrical structures are only occasionally formed. When they are, it is principally to colocate components, for example, the tyrosyl kinases of growth factors, where dimers form. Symmetry is, however, often broken, presumably to create more sensitivity and specificity in the signaling system by assembling other components, into higher-order multiprotein systems. The binding of a single heparin to two 1:1 FGF:FGFR complexes is an example, as is the binding of a single ligase to the Xrcc4 dimer, perhaps so creating a further DNA-binding site.