Luminarin 9: A new fluorescent reagent for the precolumn derivatizatioin of main volatile and non-volatile N-nitrosamines in RP-HPLC

Summary A sensitive precolumn fluorescence derivatization method for low level detection of the, volatile (N-nitrosodimethylamine and N-nitrosopyrrolidine) and non-volatile N-nitrosamines (N-nitrosoproline and N-nitrosodiethanolamine) an high-performance liquid chromatography was developed. This method is based on the denitrosation of the compounds of interest by a mixture of hydrobromic acid and acetic acid to produce the corresponding secondary amines. These are, then, able to react with, a quinolizinocoumarin derivative (luminarin 9^®) to form highly fluorescent labelled N-nitrosamine derivatives. The structural elucidation of the luminarin 9^® derivatives of N-nitrosoproline and N-nitrosodimethylamine by way of example, were established by liquid chromatography-mass spectrometry (LC-MS) and by direct chemical ionization-mass spectrometry (CI-MS). The separation, derivatization and detection conditioins were optimized for all the studied compounds. The detection limits (signal to noise ratio=3) were between 0.4 and 1.0 pmol injected depending on the compound. The calibration graphs were linear for derivatized amounts in the range of 0.5–40 nmol for N-nitrosodimethylamine and N-nitrosopyrrolidine, 0.4–2- nmol for N-nitrosoproline and 1.0–40 nmol for N-nitrosodiethanolamine. The repeatability (RSD less than 3.5%, n=6) and reproducibility (RSD less than 4.8%, n-6) were satisfactory.     

Chloryl nitrate: a novel product of the OClO + NO3 + M recombination

The products of the reaction of OClO with NO3 were investigated between 220 and 298 K using a flow reactor and infrared, visible, and ultraviolet analysis. At temperatures below 250 K new infrared and ultraviolet absorption features were observed and assigned to the novel compound chloryl nitrate (O2ClONO2). Additionally, ClO and NO2 were observed as reaction products, indicating the existence of a second reaction channel. O2ClONO2 formation predominates at temperatures below 230 K. The reaction rate constant at 220 K is estimated to be on the order of 10(-14) cm3 molecule-1 s-1 in 1-5 Torr of helium. These observations suggest that O2ClONO2 may exist in the terrestrial stratosphere.     

Mechanism of antioxidative activity of fluvastatin-determination of the active position

In order to clarify the mechanism of action for the antioxidative activity of fluvastatin sodium (FLV, (+/-)-sodium (3RS, 5RS, 6E)-7-[3-(4-fluorophenyl)-1-(1-methylethyl)-1H-indol-2-yl]-3, 5-dihydroxy-6-heptanoate) and its derivatives, reaction of the corresponding methyl ester of FLV with di-tert-butyl diperoxyoxalate was examined, and the corresponding keto derivative was isolated from the reaction mixture. On the basis of this result, it was concluded that the active site is the allylic carbon conjugated with the indole ring.     

Grafting of phosphonate groups on the silica surface for the elaboration of ion-sensitive field-effect transistors

Ion-sensitive field-effect transistors (ISFETs) sensitive to Ca(2+) ions could be elaborated by means of a new grafting process of the phosphonate group at the surface of the silica gate of FETs. A grafting process involving only one chemical reaction step at the surface afforded a significant improvement of the ISFET properties. The sensitivity of the ISFET towards Ca(2+) ions at pH 10 was quasi-linear in the concentration range from 10(-1) to 10(-3) M, and the slope was 10 mV pCa(-1). The site-binding model works well in predicting the experimental data, giving the complexation constant of 10(2.7) and a low value of the grafting density. The origin of the poor response of ISFETs sensitized by means of a multistep grafting process was investigated on silica powders of high specific area: the cleavage of the organic grafts at the SiOSi bonds occurring at each step could be disclosed by means of elemental analyses, infrared, and cross-polarization and magic angle spinning nuclear magnetic resonance of the grafts.     

Electronic and molecular properties of an adsorbed protein monolayer probed by two-color sum-frequency generation spectroscopy

Two-color sum-frequency generation spectroscopy (2C-SFG) is used to probe the molecular and electronic properties of an adsorbed layer of the green fluorescent protein mutant 2 (GFPmut2) on a platinum (111) substrate. First, the spectroscopic measurements, performed under different polarization combinations, and atomic force microscopy (AFM) show that the GFPmut2 proteins form a fairly ordered monolayer on the platinum surface. Next, the nonlinear spectroscopic data provide evidence of particular coupling phenomena between the GFPmut2 vibrational and electronic properties. This is revealed by the occurrence of two doubly resonant sum-frequency generation processes for molecules having both their Raman and infrared transition moments in a direction perpendicular to the sample plane. Finally, our 2C-SFG analysis reveals two electronic transitions corresponding to the absorption and fluorescence energy levels which are related to two different GFPmut2 conformations: the B (anionic) and I forms, respectively. Their observation and wavelength positions attest the keeping of the GFPmut2 electronic properties upon adsorption on the metallic surface.     

Synthesis of cationic guar gum-graft-polyacrylamide at low temperature and its flocculating properties

Acrylamide grafted cationic guar gum (CGG-g-PAM), induced by ceric ammonium sulfate, was synthesized using aqueous polymerization technique at 10 °C and the flocculation property was studied with high-turbidity tobacco wastewater (NTU > 4500). Thus five grades of graft copolymers were obtained through alteration of initiator and monomer concentrations in order to understand the effect of molecular weight on flocculation. The grafted copolymer was characterized by FTIR and SEM. Study of DTG demonstrated that CGG-g-PAM had better heat-resistant performance than guar gum, cationic guar gum (CGG) and polyacrylamide. The dosage of polyaluminium chloride (PAC) and CGG-g-PAM, pH value and molecular weight were considered to be the factors that can influence flocculation efficiency. The result showed best flocculation efficiency occurs at pH 5 when the dosage of CGG-g-PAM and PAC are 3.6 ppm and 120 ppm, respectively. The percentage of turbidity and COD removal are 98% and 24% correspondingly, and its flocculating efficiency prevails over that of CGG and cationic polyacrylamide (CPAM).     

Optimization of simulated moving bed plants with low efficient stationary phases: separation of fructose and glucose

An optimization procedure for simulated moving bed (SMB) plants with low efficient stationary phases is presented. The new aspect is that the desorbent consumption can be cut by 70% by running the plant with lower internal liquid flows and a corresponding larger switch time while the productivity is kept constant. This concept was validated by the separation of fructose and glucose in water on a calcium resin with an eight-column SMB plant. The separation can be predicted well by a true moving bed (TMB) and a simulated moving bed simulation. Adsorption isotherms were determined up to 300 kg/m3 for glucose and 500 kg/m3 for fructose from 25 to 80 degrees C. Experimental SMB runs were performed over a wide range of feed concentrations (10-350 kg/m3) and temperatures (25-80 degrees C). The strong influence of the delay volume is pointed out. For an experimental run with high feed concentration a complete set of data is presented. To reduce biological growth separation at 80 degrees C is recommended.     

Practical asymmetric synthesis of (S)-MA20565, a wide-spectrum agricultural fungicide

A practical asymmetric synthesis of a wide-spectrum agricultural fungicide, (S)-MA20565 (1), is described. The convergent synthesis was achieved starting from commercially available 3-(trifluoromethyl)aniline (7) in 44% overall yield through five steps and 2-bromobenzaldehyde (9) in 48% overall yield through four steps, respectively. (S)-O-[1-(3-Trifluoromethylphenyl)ethyl]hydroxylamine (2), a key intermediate of 1, was prepared via ruthenium(II)-catalyzed asymmetric transfer hydrogenation of 1-(3-trifluoromethylphenyl)ethanone (6) followed by chlorination using methanesulfonyl chloride and oxyamination using potassium acetohydroxamate with high level of stereocontrol.     

An application of activation analysis of aluminum in biological materials

The behavior of aluminum compounds in animals was made clear by using non-destructive neutron activation analysis instead of radiotracer method. Basic aluminum sucrose sulfate (BASS) and dried aluminum hydroxide gel (DAHG) were orally administered to rats. The residual BASS and DAHG on gastric walls of rats were determined by neutron activation analysis. It was obtained the following results that BASS was found at the longer time in the stomach. For reason, it is seemed that BASS is hydrolyzed in gastric juice. And it could not find the aluminum in liver, kidney and spleen.     

Chemical studies on nitrogen heterocyclic skeleton of the Daphniphyllum alkaloids

From a biogenetic point of view, a great variety of related alkaloids isolated from the plant Daphniphyllaceae are related to one another by bond formation or fission. Thus, daphnialcohol acetate (6), a derivative of the degradation products of daphniphylline (1), was subjected to von Braun degradation followed by acid-catalyzed recyclization to give an isomer (8) of daphnialcohol, which has a new type of nitrogen heterocyclic skeleton. Furthermore, daphnilactone-B (3) was converted into a daphniphylline-type compound (19) via a plausible intermediate (21).