Let { X n} be a Markov chain that is either f -mixing or satisfies the Poisson equation.In this note we obtain the convergence rate under L 1 -criterion for bounded functions of the X k 's. And in the hidden Markov model setup { (X n ,Y n ) }we study the kernel estimate of the density of the observed variables { Y n }when a 'stable' status is reached. 相似文献
In an magnetohydrodynamic (MHD) generator using a frozen inert gas plasma (FIP), the availability of a frozen argon plasma, the influence of plasma uniformity at the generator inlet on the performance, and the feasibility of a large-scale generator are numerically examined by /spl gamma/-/spl theta/ two-dimensional simulation. The FIP is produced by pre-ionizing inert gas without an alkali metal seed at the generator inlet, then the ionization degree of the plasma is kept almost constant in the whole of the channel because of considerable slow recombination of the inert gas just like frozen reaction plasma. It is found that not only helium, but also argon frozen plasma MHD generation is realized, although highly accurate control of inlet ionization degree is necessary for argon. It is important to reduce the nonuniformity of plasma properties at the generator inlet in order to raise the maximum enthalpy extraction ratio. Even for the large-scale generator with 1000-MW thermal input, the ionization degree is kept almost constant in the whole of the channel and the high performance is obtainable. This result is extremely attractive for the FIP MHD generator. 相似文献
Both S-(-)- and R-(+)-enantiomers of 5-(p-hydroxyphenyl)-5-phenylhydantoin (p-HPPH), a main oxidative metabolite of the achiral antiepileptic drug phenytoin, could be determined simply, sensitively and accurately using reversed phase high-performance liquid chromatography by using a methanol-monopotassium phosphate eluent containing beta-cyclodextrin. Using this assay procedure, it was determined that an S-(-)-enantiomer was formed predominantly by the oxidation of phenytoin in isolated rat hepatocytes. 相似文献
Carotenoid cation radicals have been observed at 120 K, by EPR and proton ENDOR measurements, to be formed upon 77 K photolysis of thin films of Nafion or silica gel coated with the carotenoids, β-carotene and canthaxanthin. The powder ENDOR spectra consist of resolvable lines due to couplings larger than 2.8 MHz but smaller than 17 MHz assigned to the methyl protons of the carotenoid cation radical and to an -proton of the planar polyene chain. 相似文献
Thermal and magnetotransport properties of mechanically alloyed Co30Cu70 powders of three different milling times are studied. Both milling and annealing bring about oxidation of the samples. The powders show exothermic behaviors corresponding to the lattice-recovery process. Different milling times and annealing temperatures give rise to different exothermic peaks because of oxidation and the cluster distribution. At room temperature, the compressed powders show, on average, up to 11% giant magnetoresistance (GMR) under 10 kOe with sharp switching. The results may be understood in terms of spin-dependent scattering across Co/oxide/Cu interfaces. Annealing reduces the resistance but does not promote the GMR. By annealing at 400 °C, the GMR is entirely suppressed as the magnetic content is largely replaced by oxides. PACS 72.15.Eb; 75.47.De; 75.47.Np 相似文献
Adsorption and decomposition of triethylindium (TEI: (C2H5)3In) on a GaP(0 0 1)-(2×1) surface have been studied by low-energy electron diffraction (LEED), Auger electron spectroscopy (AES), temperature-programmed desorption (TPD) and high-resolution electron energy loss spectroscopy (HREELS). It is found from the TPD result that ethyl radical and ethylene are evolved at about 300–400 and 450–550 K, respectively, as decomposition products of TEI on the surface. This result is quite different from that on the GaP(0 0 1)-(2×4) surface. The activation energy of desorption of ethyl radical is estimated to be about 93 kJ/mol. It is suggested that TEI is adsorbed molecularly on the surface at 100 K and that some of TEI molecules are dissociated into C2H5 to form P–C2H5 bonds at 300 K. The vibration modes related to ethyl group are decreased in intensity at about 300–400 and 450–550 K, which is consistent with the TPD result. The TEI molecules (including mono- and di-ethylindium) are not evolved from the surface. Based on the TPD and HREELS results, the decomposition mechanism of TEI on the GaP(0 0 1)-(2×1) surface is discussed and compared with that on the (2×4) surface. 相似文献
Erbium and ytterbium codoped double tungstates NaY(WO4)2 crystals were prepared by using Czochralski (CZ) pulling method. The absorption spectra in the region 290-2000 nm have been recorded at room temperature. The Judd-Ofelt theory was applied to the measured values of absorption line strengths to evaluate the spontaneous emission probabilities and stimulated emission cross sections of Er3+ ions in NaY(WO4)2 crystals. Intensive green and red lights were measured when the sample were pumped by a 974 nm laser diode (LD), especially, the intensities of green upconversion luminescence are very strong. The mechanism of energy transfer from Yb3+ to Er3+ ions was analyzed. Energy transfer and nonradiative relaxation played an important role in the upconversion process. Photoexcited luminescence experiments are also fulfilled to help analyzing the transit processes of the energy levels. 相似文献
The surface morphology evolution of Ni/W alloys was studied, as a function of the alloy composition. Using the modified plating baths developed in our laboratory recently, electroplated Ni/W alloys with different W content, in the range of 7–67 atom percent (a/o), can be obtained. This was found to lead to different structures, ranging from polycrystalline fcc-Ni type structure to amorphous, followed by orthorhombic with increasing W content in the alloy. Powder XRD was studied to determine the crystal structures. Ex situ STM, AFM and SEM were used to study in detail the surface morphologies of the different alloys, and their evolution with increasing W content.
The important findings are that a mixture of two crystalline forms can give rise to an amorphous structure. Hillocks that are usually a characteristic of epitaxial growth can also exist in the amorphous alloys. Oriented scratches caused by stress can also be formed.
Up to 20 a/o of W is deposited in the alloys in crystalline form, with the fcc-Ni type structure. Between 20 and about 40 a/o an amorphous structure is observed, and above that an orthorhombic crystal structure is seen, which is characteristic of the NiW binary alloy. Careful choice of the composition of the plating bath allowed us to deposit an alloy containing 67 a/o W, which corresponds to the composition NiW2. 相似文献
This paper presents the simulation of surface acoustic wave (SAW)-induced absorption coefficient and refractive index change in InGaAs-GaAs multiple quantum well (MQW) structures operating near 980 nm. The exciton problem is solved in two dimensional momentum space to include the non-axial effect due to strain induced valance band mixing and nonparabolicity. The optical absorption coefficient and refractive index changes near the band gap in the MQWs are calculated as a function of SAW power. 相似文献
This paper presents a practical method for trimming the natural frequencies of an initially imperfect ring to simultaneously eliminate certain of the frequency splits present. Compared with previous work, the novel feature of this method is that the trimming masses are positioned at pre-selected locations on the ring. The basis for the proposed method is the concept of equivalent imperfection mass, which allows any imperfect ring to be considered as a perfect ring with equivalent imperfection masses attached. By considering this trimming problem it is deduced that it is possible to trim N pairs of modes simultaneously by removing (a minimum of) 2 N trimming masses at particular locations around the ring. By positioning the trimming masses at pre-selected locations, it is shown that a simple set of trimming masses can be calculated easily, and from this set an infinite number of solution sets can be found. Methods for generating these sets are outlined for the trimming of both a single and a dual pair of modes. In practice, it is likely that the trimming masses will be spaced regularly. For this special case, it is found that it is not possible to trim all single- and dual-mode pairs with any arrangement of masses. Validation of the derived simple solution set and the proposed procedure to generate further sets is achieved by studying a number of theoretical examples. 相似文献