The determination of trace amounts of tin by flow-injection hydride generation atomic-absorption spectrometry with on-line ion-exchange separation and preconcentration

A hydride generation atomic-absorption spectrometric (AAS) method with flow-injection (FI), aimed at developing a practical routine assay for the determination of tin in food digests, is described. In order to modify the sample matrix and to achieve optimized and reproducible conditions for the hydride generation reaction, the analyte is initially converted into its chlorostannate-complex thereby allowing it to be separated and preconcentrated on-line on an incorporated micro-column packed with a strongly basic anion exchanger and subsequently to be eluted by diluted nitric acid under strictly controlled conditions. Optimum acidic conditions for the FI hydride generation AAS system was found to be 0.01-0.05M nitric acid. At a consumption of 2.7-ml sample volume, aspirated by time-based injection, the procedure resulted in an enrichment factor of 3.5 and yielded a detection limit of 0.08 microg/l. (3sigma) at a sampling frequency of 72/hr. The precision was 2.5% rsd at the 10 microg/l. level. Potential interferents, such as Ni(II), Co(II), Zn(II) and Fe(III) could, at a Sn level of 10 microg/l., be tolerated at an excess of 1000 times without impairing the assay, while a 100-1000-fold excess of Cu(II) decreased the signal by 10-15%. Recoveries in the range 94-102% were obtained for canned food sample digests spiked with 10 microg/l. Sn.     

Spezifisches Verfahren zur quantitativen CO2-Bestimmung in natürlichen Wässern

The direct determination of CO₂ is often faulty because of certain contents of the natural water. Due to this reason a specific method was worked out. The water to be analysed and distilled water are placed side by side in a gas-tight vessel with an atmosphere free of CO₂, whereby mixing is avoided but gas-exchange is possible. After adjustment to the gas-equilibration the CO₂ content of the distilled water is determined e.g. by titration, measuring of conductivity or other methods, from where the CO₂ content in the natural water is calculated.     

Carbonyldinitrosyltris(fluorosulfato)tungstate(II) and ‐Molybdate(II) Anions: Synthesis,Spectroscopy, and Density Functional Theory Calculations

Carbonyldinitrosyltris(fluorosulfato)tungstate(II) and ‐molybdate‐(II) anions, [fac‐M(CO)(NO)₂(SO₃F)₃]^? (M=W, Mo), which are novel weakly coordinating anions that contain a metal carbonyl/nitrosyl moiety, have been generated in fluorosulfonic acid and completely characterized by multinuclear NMR, IR, and Raman spectroscopy as well as ESI mass spectrometry. ESI MS measurements performed for the first time on a superacidic solution system unambiguously reveal the formation of the monoanionic, mononuclear W and Mo complexes formulated as [M(CO)(NO)₂(SO₃F)₃]^? (M=W, Mo). Multinuclear NMR spectroscopic studies at natural abundance and ¹³C and ¹⁵N enrichment clearly indicate the presence of one CO ligand, two equivalent NO ligands, and two types of nonequivalent SO₃F^? groups in a 2:1 ratio. The IR and Raman spectra reveal that the two equivalent NO ligands have a cis conformation, thus indicating a fac structure. Density functional calculations at the B3LYP level of theory predict that these anions have a singlet ground state (¹A′) with a C_s symmetry along with C–O and N–O vibrational frequencies that are in agreement with the experimental observations. Mulliken population analysis shows that the monovalent negative charge is dispersed on the bulky sphere, the surface of which is covered by all the negatively charged O and F atoms with charge densities much lower than SO₃F^?, suggesting that [fac‐M(CO)(NO)₂(SO₃F)₃]^? (M=W, Mo) are weakly nucleophilic and poorly coordinating anions.     

The design of an irradiator for the continuous processing of liquid latex

This paper presents anew design concept for a gamma irradiation plant for the continuous processing of pumpable liquids. Typical applications of such a plant include

• * the irradiation vulcanisation of natural latex rubber

• * disinfection of municipal sewage sludge for agricultural use

• * sterilisation of liquids in the pharmaceutical and cosmetics industries

• * industrial processing of bulk liquids

The authors describe the design and operation of the latex irradiator now operating on a small production scale in Malaysia and proposed developments.

The design allows irradiation processing to be carried out under an inert or other gaseous environment.

State-of-the-art computer control system ensures the fully automatic processing operation needed by industrial computers.     

Application of the slotted quartz tube in flow-injection flame atomic-absorption spectrometry

The slotted quartz has been applied to flow-injection flame atomic-absorption spectrometry (FI-FAAS) showing several important advantages. The tube life was improved by a factor of 5-6 compared to conventional continuous aspiration. Flow impact systems were found not to be necessary in the applications so that larger enhancement factors may be achieved without sacrifice in precision. For 1.0 mg/l. copper, 1.0 mg/l. lead, 0.1 mg/l. cadmium and 1.0 mg/l. gold sensitivity enhancement factors of 3.1, 5.5, 5.3 and 4.0 were obtained with precisions of 1.3%, 1.1%, 1.6% and 1.7% RSD (n = 11) respectively. Application of the slotted quartz tube FI-FAAS method to the determination of heavy metals in urine has shown improved tolerance to interfering matrices. Recoveries obtained by spiking undiluted urine samples with 0.1 mg/l. copper and lead, and 0.01 mg/l. cadmium were in the range 100-102%.     

Micranoic acids A and B: two new octanortriterpenoids from Schisandra micrantha

Two novel octanortriterpenoids, micranoic acids A (1) and B (2), along with three known compounds, kadsuric acid (3), 3beta-hydroxy-lanost-9(11),24(25)-dien-26-oic acid (4) and schizandronic acid (5), were isolated from the leaves and stems of Schisandra micrantha. The structures of 1 and 2 were determined by 1D and 2D NMR spectroscopic analysis. Micranoic acids A and B represent a new group of triterpenes in which the entire C-17 side chain has lost. This is the first report of octanortriterpenoids isolated from the family Schisandraceae.     

Phase separation of quaternary solubilized solutions or micro emulsion of hydrocarbons containing sodium oleate + phenol + benzene + water by freezing point measurements

Summary The depressions in freezing point measurements in quaternary solubilized solutions or micro-emulsion in sodium oleate + phenol + benzene + water are measured. Maxima and minima were observed, Gibbs' phase rule was applicable, eutectic points were detected, congruent melting points were obtained, loose combination of molecules or clusters, were formed, phases of the system transferred and finally unstable emulsion separated out. This is contrary to the views ofMcBain who called these solutions as thermodynamically stable. The results were compared with the conductivity, stability and heat of solubilization-concentration measurements.

---

Zusammenfassung Es wird die Gefrierpunktserniedrigung von quaternären solubilisierten Lösungen im System Natriumoleat-Phenol-Benzol-Wasser gemessen. Die verschiedenen Befunde (Maxima und Minima des Gefrierpunktes in Abhängigkeit von der Zusammensetzung, Anwendbarkeit der Gibbs'schen Phasenregel, Auftreten von Eutektika, kongruente Schmelzpunkte etc.) dienen zum Beweis, daß diese Lösungen thermodynamisch instabil sind.

---

---

With 5 figures and 1 table     

Molecular dynamics simulation of the structural configuration of binary colloidal monolayers

Molecular dynamics simulations of binary colloidal monolayers, i.e., monolayers consisting of mixtures of two different particle sizes, are presented. In the simulations, the colloid particles are located at an oil-water interface and interact via an effective dipole-dipole potential. In particular, the influence of the particle ratio on the configurations of the binary monolayers is investigated for two different relative interaction strengths between the particles, and the pair correlation functions corresponding to the binary monolayers are calculated. The simulations show that the binary monolayers can only form two-dimensional crystals for certain particle ratios, for example, 2:1, 6:1, etc., while, for example, for a particle ratio of 7:1 the monolayers are found to be in a disordered, glassy state. The calculations also reveal that in analogy to the Wigner lattice the configurations are very sensitive to the relative interaction strength between the particles but not to the absolute magnitude of the interaction strength, even when particle size effects are taken into account. Consequently, it is argued that a comparison between the calculated configurations and actual binary particle monolayer systems could provide useful information on the relative interaction strength between large and small particles. Possible mechanisms giving rise to disparities in the interaction strength between large and small particles are described briefly.     

Neutron activation analysis of gold and iridium in steel

A method of determination of trace gold and iridium in steel is presented. The samples were preconcentrated with an anion exchanger. The chemical recoveries were determined by an isotope tracer technique using¹⁹⁸Au and¹⁹²Ir.     

Folded chain crystals as micro-phases

Summary A thermodynamic treatment of homo-polymer systems out of linear chains with folded chain crystals is developed outgoing from appropriate models for single component systems. An expansion of thermodynamics to multi-micro-phase systems the structure of which is partially or totaly frozen is indispensable. General properties of melt crystallized homopolymers with folded chain crystals can be recognized indeed when the thermodynamic formalisms developed are applied.

---

Zusammenfassung Das Schmelzen in polymeren Einteilchensystemen mit Faltungskristallen einheitlicher Dicke kann thermodynamisch als Umwandlung 1. Ordnung in einer Richtung behandelt werden, wenn die Faltungslänge bis zur Umwandlungstemperatur konstant bleibt (Faltungslänge als innerer Zusatzparameter). Eine wesentliche begriffliche Erweiterung ist für eine phänomenologische Beschreibung mit den Mitteln der Thermodynamik unumgänglich, wenn eine Faltungskristallit-Dickenverteilung existiert, weil dann prinzipiell nur noch partielle Koexistenz bestimmter Fraktionen metastabiler autonomer Mikrophasen mit der Schmelze möglich ist. Partielles Aufschmelzen und Rektistallisation können so dann auch in Betracht genommen werden. Die entwickelten Konzeptionen bewähren sich in der Anwendung auf bekannte Experimente.

---

Notation g ^c (y);g ^m (Y) molar Gibbs-free energy of a chain of a lengthy within an extended chain crystal and the melt rsp - g _o ^c ;g _o ^m molar free enthalpy of the unit in the crystal lattice and the melt rsp - g(y,y, f) molar Gibbs-function of an ideally folded chain crystal with the fold heighty _f - gco(y, y _ef,y _f) molar free enthalpy of the crystal corey _co - g ₀ ^ex ((y_ef) excess free enthalpy of the longitudinal layers of folded chain crystals - g ^f(y_ef,g _o ^ex ) molar free enthalpy of the longitudinal layers of the folded chain crystals - g ^tot molar free enthalpy of a chain of the lengthy within a folded chain crystal with longitudinal layers - h _o ^1c ,h _o ^m molar enthalpy of the chain unit within the crystal lattice and the melt rsp - h =h _o ^m -h _o ^c molar heat of fusion of the unit - C _p=C _p ^m -C _p ^c difference of the molar specific heat of a unit within the melt and within the chain crystal - h ^D molar defect enthalpy of local defects within the crystal lattice - h ^D molar defect enthalpy of the unit - s _o ^c ,s _o ^m molar entropy of the chain unit within the crystal lattice and the melt rsp - s _c ^m conformational entropy of a chain in the melt - s _gk conformational entropy of a chain of lengthy within a super-lattice as indicated in figure 5, - s molar entropy of fusion of the melt - s _n ^c nematic configurational entropy - T absolute temperature - T _M melting temperature of extended chain crystals of infinite size - T _M(y) melting temperature of extended chain crystals containing only chains of the lengthy - T _M (y, y _f) melting temperatureof folded chain crystals of the thicknessy _f composed of chains of the lengthy - T _M(y _f) melting temperature of folded chain crystals of the thicknessy _fy - _eh excess free enthalpy of the chain ends occupying crystallographic places - _ef excess free enthalpy of a single fold loop - z coordination number of the lattice - 7 Euler's constant - R Boltzmann's constant - y number of chain units - y _f height of lamelliform folded chain crystals - f=(y/y _f - 1) number of fold loops of a chain of a lengthy when being built into a folded chain crystal of the thicknessy _f - y _co thickness of the crystal core of the simplified twophase model - y _et average thickness of the surface layers of folded chain crystals - N _c number of crystallized units of a chain of the lengthy - x _c molar number of crystallized units of a chain of the lengthy - x _nc molar number of noncrystallized units - excess free enthalpy parameter - (y _f) thickness distribution of the fold heightsy _f With 15 figures and 2 tables