TiO2一维纳米材料及其纳米结构的合成

本文对合成TiO₂一维纳米材料及其有序纳米阵列的阳极氧化法、模板法以及水热法进行了全面而系统的评述，着重介绍了它们的最新研究进展。阳极氧化法能制备牢固负载于基体上的TiO₂纳米管阵列，这有助于构筑TiO₂纳米结构及其在纳米器件上的应用；与多种制备技术如溶胶－凝胶工艺、电化学沉积以及原子层沉积等相结合，模板法可以合成出多种形貌的TiO₂纳米材料如纳米管、纳米线和纳米棒，并可以通过改变所用模板的微观尺寸来调控TiO₂一维纳米材料及其有序阵列的微结构参数；水热合成法可以制备出直径小且比表面积大的TiO2纳米管粉末。但从目前看来，该法还不能制备出牢固负载于基体上的有序纳米阵列。文章最后指出了TiO₂一维纳米材料及其有序纳米阵列合成中存在的问题及今后发展方向。     

微乳液法制备超细K2Ln2Ti3O10及其光催化活性研究

以钛酸四丁酯、氢氧化钾和镧系金属氧化物为原料。采用微乳液法制备了系列超细K2Ln2Ti3O10（Ln=La．Ce,Pr．Nd，Sm，Eu，Gd）光催化剂。并考察了其光催化活性。通过X射线衍射（XRD）、透射电镜（TEM）和紫外可见吸收光谱（UV—Vis）对其进行了表征。结果表明：用微乳液法制备催化剂可以在较低的温度下（900℃），用较短的烧结时间（3h）合成结晶度高、粒径较小（200Mm）的K2Ln2Ti3O10钙钛矿型层状结构化合物。催化剂在紫外光和可见光条件下均具有光催化降解甲基橙的活性。紫外光条件下可以明显提高光催化降解活性，降解率达到60％。     

稀土复合型柴油催化助燃剂的研制及应用

采用铈、铂的有机配合物及碳酸酯制备出一种稀土复合型柴油催化助燃剂.通过发动机台架试验,表明添加剂可有效降低碳烟PM和NOz排放,并且发动机热效率有所提高.     

WOx/TiO2光催化剂的可见光催化活性机理探讨

采用磁控溅射技术在用浸渍提拉法制得的TiO2薄膜上，溅射氧化钨层,通过气相反应中光催化降解二甲苯的实验表明，WOx/TiO2薄膜具有可见光活性.通过UV-Vis吸收光谱、X射线光电子能谱（XPS）等方法对其可见光活性的机理进行探索.UV-Vis吸收光谱表明WOx,TiO2对可见光响应的范围有一定的扩展,吸收强度增加.XPS表明WOx/TiO2薄膜表面形成了明显的W杂质能级和Ti缺陷能级,这是WOx/TiO2在可见光范围有一吸收的主要原因,也是光催化剂具有可见光活性的必要条件之一，同时杂质能级的存在使半导体费米能级上移,载流子增加,光催化效率提高.     

Underpotential deposition of tin(II) on a gold disc electrode and determination of tin in a tin plate sample

This work describes a study of the underpotential deposition (UPD) of Sn²⁺ on a polycrystalline gold disc electrode using cyclic voltammetry (CV) and chronocoulometry (CC). Sn²⁺ ions showed well-defined peaks from UPD and UPD stripping (UPD-S) in 1 mol/L HCl solutions, while bulk deposition (BD) and BD stripping (BD-S) of the ions were also observed. The measured UPD shifts, E_UPD, between the UPD-S and the BD-S peaks were more than 200 mV. The UPD charge and the surface coverage of tin were measured by CC. A new method for determining Sn²⁺ was therefore developed, based on the excellent electrochemical properties of the Au/Sn UPD system. A plot of the UPD-DPASV (differential pulse anodic stripping voltammetry) signal versus the Sn(II) concentration was obtained for [Sn(II)] of 1.98×10^–7 to 3.64×10^–5 M. The method developed here has been applied to determine the tin in a tin plate sample.     

掺C60有机玻璃的吸收光谱研究

研究了Ｃ６０分别在有机玻璃（ＰＭＭＡ）和正己烷中的吸收光谱，发现Ｃ６０在有机玻璃中的吸收峰同在正己烷中相互对应，同时前者的吸收峰相对于后者峰宽变大，峰位产生红移，分析了产生这种现象的原因。     

聚醋酸乙烯酯的光引发可控合成——介绍一个高分子化学综合实验

本实验开展了醋酸乙烯酯的可逆加成-断裂链转移自由基聚合(RAFT),分别运用偶氮二异丁腈(AIBN)引发和可见光引发两种方式进行了聚合反应,运用核磁共振和凝胶色谱等多种手段对所得聚合物结构进行了表征与分析。通过比较AIBN引发与光引发所获得聚合物端基结构的异同,加深了学生对RAFT聚合方法原理的理解。同时,运用该方法实现了聚合物两端端基结构的高度功能化,深入体会聚合物合成设计概念。本综合实验教学不仅通过对比法加深了学生对实验原理和专业知识的理解,提升了学生创新研究能力,而且训练了学生的实验操作技能、大型仪器使用能力和结果分析能力,提升了综合素质。     

Tobacco protein separation by aqueous two-phase extraction

Tobacco has long been considered as a host to produce large quantity of high-valued recombinant proteins. However, dealing with large quantities of biomass is a challenge for downstream processing. Aqueous two-phase extraction (ATPE) has been widely used in purifying proteins from various sources. It is a protein-friendly process and can be scaled up easily. In this paper, ATPE was studied for its applicability to recombinant protein purification from tobacco with egg white lysozyme as the model protein. Separate experiments with poly(ethylene glycol) (PEG)-salt-tobacco extract and PEG-salt-lysozyme were carried out to determine the partition behavior of tobacco protein and lysozyme, respectively. Two-level fractional factorial designs were used to study the effects of factors such as, PEG molecular mass, PEG concentration, the concentration of phase forming salt, sodium chloride concentration and pH, on protein partitioning. The results showed that, among the studied systems, PEG-sodium sulfate system was most suitable for lysozyme purification. Detailed experiments were conducted by spiking lysozyme into the tobacco extract. The conditions with highest selectivity of lysozyme over native tobacco protein were determined using a response surface design. The purification factor was further improved by decreasing the phase ratio along the tie line corresponding to the phase compositions with the highest selectivity. Under selected conditions the lysozyme yield was predicted to be 87% with a purification factor of 4 and concentration factor of 14. From this study, ATPE was shown to be suitable for initial protein recovery and partial purification from transgenic tobacco.     

Microwave-assisted direct addition of cycloethers to alkynes

Under microwave conditions, tetrahydrofuran (THF), tetrahydropyran and 1,4-dioxane are added directly onto alkynes and generated various vinyl cycloethers.     

芳基汞化合物的性质研究——Ⅶ.邻位取代苯基氯化汞的质子分解反应

本文研究了邻位取代苯基氯化汞o-XC_6H_4HgCl(X=CH_3、H、Cl、Br、COOC_2H_5、NO_2)与HCl(NaI)在85％对氧陆圜水溶液中的质子分解反应,证明反应按S_El历程进行。视取代基不同,反应速度次序如下:CH_3>H>Cl>COOC_2H_5～Br>NO_2。从化学反应与紫外光谱的研究以及理论计算结果表明,p或π电子的邻位取代基对水原子有分子内配位,它对反应速度有重要影响。测定了15种p-、m-、o-取代苯基氯化汞在80％对氧陆圜水溶液中在40.0℃的质子分解反应的速度常数k_1,表明给电性取代基加速反应,吸电性取代基使反应减慢,这可以看作是反应中心在芳环上的芳基汞化合物的S_E1反应所具有的一个特点。