Microalgae separation by inertia-enhanced pinched flow fractionation

To improve the accuracy and efficiency of ships’ ballast water detection, the separation of microalgae according to size is significant. In this article, a method to separate microalgae based on inertia-enhanced pinched flow fractionation (iPFF) was reported. The method utilized the inertial lift force induced by flow to separate microalgae according to size continuously. The experimental results show that, as the Reynolds number increases, the separation effect becomes better at first, but then stays unchanged. The best separation effect can be obtained when the Reynolds number is 12.3. In addition, with the increase of the flow rate ratio between sheath fluid and microalgae mixture, the separation effect becomes better and the best separation effect can be obtained when the flow rate ratio reaches 10. In this case, the recovery rate of Tetraselmis sp. is about 90%, and the purity is about 86%; the recovery rate of Chlorella sp. is as high as 99%, and the purity is about 99%. After that, the separation effect keeps getting better but very slowly. In general, this study provides a simple method for the separation of microalgae with different sizes, and lays a foundation for the accurate detection of microalgae in the ballast water.     

Reversible Photoinduced Conversion of Unprecedented Norbornadiene-Based Photoswitches with Redox-Active Naphthalene Diimide Functionalities

An unprecedented compound class of functional organic hybrids consisting of a photoswitchable norbornadiene building block and a redoxactive chromophore, namely naphthalene diimide, were designed and synthesized. Within these structures the capability of rylene chromophores to function as a redox active catalyst upon their photoexcitation was utilized to initiate the oxidative back-conversion of the in situ formed quadricyclane unit to its norbornadiene analogue. In this way successive photoexcitation at two different wavelengths enabled a controlled photoswitching between the two isomerical states of the hybrids. Beyond this prove of concept, the dependency of the reaction rate to the intramolecular distance of the two functional molecular building blocks as well as the concentration of the photoexcited sample was monitored. The experimental findings and interpretations were furthermore supported by quantum chemical investigations.     

采用3×3耦合器的开环光纤陀螺技术研究

针对采用 3×3 耦合器的开环光纤陀螺,研究了一种采用三个探测器进行信号检测的技术方案,建立了比较精确的信号检测模型,并且对信号检测模型中的参数进行了研究,给出了系数公式以及系数求解的方法,同时还分析了所求系数的精度对陀螺零位和标度因数的影响。     

Plastic surface strain mapping of bent sheets by image correlation

A technique using a single CCD camera, a precision rotation/translation stage, a telecentric zoom lens, and digital image correlation software is described for measuring surface profiles and surface plastic strain distributions of a bent thin sheet. The measurement principles, based on both parallel and pinhole perspective projections, are outlined and the relevant mathematical equations for computing the profiles and displacement fields on a curved surface are presented. The typical optical setup as well as the experimental measurement and digital image correlation analysis procedure are described. The maximum errors in the in-plane and out-of-plane coordinates or displacements are about ±5 and ±25 μm, respectively, and the maximum errors in surface strain mapping are about 0.1% or less based on a series of evaluation tests on flat and curved sample surfaces over a physical field of view of 15.2 × 11.4 mm². As an application example, the shape and surface plastic strain distribution example, the shape and surface plastic strain distributions around a bent apex of a flat 2 mm thick automotive aluminum AA5182-O sheet, which underwent a 90° bend with three bend ratios of 2t, 1t, and 0.6t, are determined using the proposed technique.     

INTERACTION-MEDIATED GROWTH OF CARBON NANOTUBES ON ACICULAR SILICA-COATED α-Fe CATALYST BY CHEMICAL VAPOR DEPOSITION

Multi-walled carbon nanotubes (MWNTs) with 20 nm outer diameter were prepared by chemical vapor deposition of ethylene using ultrafine surface-modified acicular α-Fe catalyst particles.The growth mechanism of MWNTs on the larger catalyst particles are attributed to the interaction between the Fe nanoparticles with the surface-modified silica layer.This interaction-mediated growth mechanism is illustrated by studying the electronic,atomic and crystal properties of surface-modified catalysts and MWNTs products by characterization with X-ray diffraction (XRD),transmission electron microscopy (TEM),high resolution transmission electron microscopy (HRTEM),thermal gravimetric analysis (TGA) and Raman spectra.     

二维弹性接触问题中随机边界元法与可靠性分析

发展了二维弹性接触问题中的随机边界元法，推导并建立了相应的随机边界元基本方程，并将所发展的方法用于静强度的可靠性分析，讨论了其数值解技术。通过算例分析表明，本文发展的方法是可行的。     

板结构功率流的参数研究

板以及肋板结构在工程中有着广泛的应用，其振动嗓声问题一直受到理论和工程领域的关注。本文在板结构功率流理论的基础上￣［１］，对板的损耗因子和不同加肋形式对其功率流的影响进行了分析和测量。     

Electrogenerated Fe(I) Porphyrins: Efficient Electrocatalysts for Reductive Dechlorination of DDT in N,N′‐Dimethylformamide

Two iron(I) porphyrins were electrogenerated and then utilized as catalysts for the reductive dechlorination of 1,1‐bis(4‐chlorophenyl)‐2,2,2‐trichloroethane (DDT) in N,N′‐dimethylformamide. No reaction is observed between DDT and the Fe(III) or Fe(II) forms of the porphyrin, but the electrogenerated Fe(I) porphyrin efficiently catalyzes the electroreduction of DDT to give (1,1‐bis(4‐chlorophenyl)‐2,2‐dichloroethane) DDD, (1,1‐bis(4‐chlorophenyl)‐2,2‐dichloroethylene) DDE and (1,1‐bis(4‐chlorophenyl)‐2‐dichloroethane) DDMU as determined by GC‐MS analysis. The reductive dechlorination was monitored by electrochemistry, controlled potential electrolysis and spectroelectrochemistry and a mechanism for the reaction involving the reduced porphyrins and DDT is proposed. Comparisons are also made between the catalytic properties of metalloporphyrins containing iron, cobalt and manganese central metal ions under the same solution conditions.     

Syngas production from methane over CeO2-Fe2O3 mixed oxides using a chemical-looping method

A series of mixed oxides Ce_{1 ? x} Fe _x O₂ was prepared by a hydrothermal method. XRD and Raman spectra were measured to study the structure of the prepared materials. The temperature-programmed reduction was undertaken to estimate reducibility of the oxides. Syngas generation from methane using these materials as oxygen carriers/catalysts via a chemical-looping procedure was investigated in detail. This procedure includes catalytic oxidation and decomposition of methane to produce H₂-rich gas at the first step followed by the production of the CO-rich gas by oxidizing the carbon deposited on deactivated catalysts. The results showed that all iron ions were incorporated into the ceria lattice with the formation of oxygen vacancies in the Ce_0.9Fe_0.1O₂ sample, while isolated Fe₂O₃ particles were distributed on the surface of the Ce_0.8Fe_0.2O₂ sample. TPR measurements and the analysis of the two-step chemical-looping reactions indicated a strong interaction between the Ce and Fe species which accounts for an increased activity of the mixed oxides in the syngas generation compared to that of individual oxides. Among the several samples, the Ce_0.8Fe_0.2O₂ catalyst showed the highest activity for methane partial oxidation due to the synergetic effects caused by the interaction of surface iron entities and Ce-Fe solid solution. In addition, selective oxidation of carbon by oxygen to CO can also be found over this material since gaseous products are formed at the carbon oxidation step with the selectivity to CO reaching 91.2%. Evidence is presented that syngas can be feasibly produced from methane with high selectivity via the chemical-looping procedure over the CeO₂-Fe₂O₃ mixed oxides.     

Quantum Hacking on an Integrated Continuous-Variable Quantum Key Distribution System via Power Analysis

In quantum key distribution (QKD), there are some security loopholes opened by the gaps between the theoretical model and the practical system, and they may be exploited by eavesdroppers (Eve) to obtain secret key information without being detected. This is an effective quantum hacking strategy that seriously threatens the security of practical QKD systems. In this paper, we propose a new quantum hacking attack on an integrated silicon photonic continuous-variable quantum key distribution (CVQKD) system, which is known as a power analysis attack. This attack can be implemented by analyzing the power originating from the integrated electrical control circuit in state preparation with the help of machine learning, where the state preparation is assumed to be perfect in initial security proofs. Specifically, we describe a possible power model and show a complete attack based on a support vector regression (SVR) algorithm. The simulation results show that the secret key information decreases with the increase of the accuracy of the attack, especially in a situation with less excess noise. In particular, Eve does not have to intrude into the transmitter chip (Alice), and may perform a similar attack in practical chip-based discrete-variable quantum key distribution (DVQKD) systems. To resist this attack, the electrical control circuit should be improved to randomize the corresponding power. In addition, the power can be reduced by utilizing the dynamic voltage and frequency scaling (DVFS) technology.