基于灰色数学的洗胃液量的软测量

鉴于洗胃液量实时在线检测与求解的困难,提出利用灰色数学的累加生成方法,把液量作为主导变量,管路二处压力差的累积压力作为二次变量,根据二者之间的一一映射关系,仿真实验研究洗胃液量的软测量技术,给出了实验结果,为液量的工程检测提供了一种数学方法.     

Experimental and numerical investigation of aramid fibre reinforced laminates subjected to low velocity impact

The low velocity impact performance of domestic aramid fibre reinforced laminates is investigated experimentally and numerically. Laminates with different thicknesses are impacted by drop-weight test machine under different impact energies. The time histories of impact force are recorded and ultrasonic C-scan technology is used to inspect the internal damage of the laminates. Numerical simulation is conducted using finite element method (FEM), taking into account both intralaminar and interlaminar damage. The intralaminar damage model is based on the continuum damage mechanics (CDM) approach, which consists of the strain-based Hashin failure criteria and the exponential damage evolution law, and considers the nonlinear shear behaviour of the material. The interlaminar damage is simulated by interface elements with cohesive zone model. The numerical results show good agreements with the experiments, thus verifying the validity of the presented numerical model.     

Preparation of sinapinaldehyde modified mesoporous silica materials and their application in selective extraction of trace Pb(II)

A new solid phase extractant, sinapinaldehyde (SA) modified SBA-15 mesoporous silica, was developed for selective extraction and preconcentration of trace Pb(II) from aqueous solutions. The successful immobilization of SA on SBA-15 and the strong interaction between SA-SBA-15 and Pb(II) were characterized and confirmed by FTIR spectroscopy and scanning electron microscopy. Parameters such as solution pH, shaking time, eluent condition and sample volume were optimized so that the maximum removal of Pb(II) from solution could be achieved. At pH 4.0, the maximum adsorption capacity of the sorbent for Pb(II) was found to be 33.6?mg?g^?1 and the adsorbed Pb(II) could be completely eluted using a mixed solution of 2?M HCl and 5% CS(NH₂)₂. Some common metal ions such as K(I), Na(I), Mg(II), Ca(II), Cr(III), Fe(III), Co(II), Ni(II), Cu(II), Zn(II), Cd(II) and Hg(II) did not interfere with the adsorption of trace Pb(II). The detection limit of the present method was found to be 1.3?ng?mL^?1 and the relative standard deviation was less than 2.0% (n?=?8). These results suggested that this new sorbent is very efficient and selective for the removal of trace Pb(II) in water samples.     

Asymmetric Synthesis VIII: Enantioselective Synthesis of (R) or (S)-α-Substituted Benzylamines VIA Chiral Pinanone Ketimine Template

An excellent asymmetric synthesis of both (R) and (S)-α-substituted benzylamines in optical purity 90.4–99.9% has been achieved by alkylation of a chiral ketimine, prepared from pinanone and benzylamine. Diastereoselectivity in the alkylation is not dependent on the alkyl halides.     

Cu∶CdS纳米晶的绿色合成、结构及光谱性质研究

本文利用一种绿色合成工艺,采用巯基乙酸作为配体,在水溶液中成功合成了水溶性的Cu∶CdS纳米晶。利用X射线衍射分析(XRD)、傅里叶变换红外光谱(FT-IR)、场发射扫描电镜显微分析(FE-SEM)、能量色散X射线谱(EDX)、紫外可见(UV-Vis)吸收光谱对样品的晶体学性质、结构、形貌、成分、吸收光谱性质进行了系统的研究。着重研究了掺杂浓度对Cu∶CdS纳米晶的晶体学性质及吸收光谱的影响。结果表明:合成的Cu∶CdS纳米晶为立方相,通过谢乐公式估算的平均晶粒尺寸约为2 nm;随着掺杂浓度的增加,产物的晶胞参数也逐渐增大,表明Cu离子已经掺入到CdS纳米晶中,该发现与EDX结果相吻合。FT-IR红外光谱发现,配体巯基乙酸成功包覆在纳米晶的表面。UV-vis吸收谱表明,掺杂后的Cu∶CdS纳米晶的吸收峰向长波长方向移动。这种红移主要是Cu离子在CdS纳米晶中的掺杂而形成电子能级跃迁所致。     

Photoisomerization Mechanism of Ruthenium Sulfoxide Complexes: Role of the Metal‐Centered Excited State in the Bond Rupture and Bond Construction Processes

Phototriggered intramolecular isomerization in a series of ruthenium sulfoxide complexes, [Ru(L)(tpy)(DMSO)]ⁿ⁺ (where tpy=2,2’:6’,2’’‐terpyridine; DMSO=dimethyl sulfoxide; L=2,2’‐bipyridine (bpy), n=2; N,N,N’,N’‐tetramethylethylenediamine (tmen) n=2; picolinate (pic), n=1; acetylacetonate (acac), n=1; oxalate (ox), n=0; malonate (mal), n=0), was investigated theoretically. It is observed that the metal‐centered ligand field (³MC) state plays an important role in the excited state S→O isomerization of the coordinated DMSO ligand. If the population of ³MC_S state is thermally accessible and no ³MC_O can be populated from this state, photoisomerization will be turned off because the ³MC_S excited state is expected to lead to fast radiationless decay back to the original ¹GS_S ground state or photodecomposition along the Ru²⁺?S stretching coordinate. On the contrary, if the population of ³MC_S (or ³MC_O) state is inaccessible, photoinduced S→O isomerization can proceed adiabatically on the potential energy surface of the metal‐to‐ligand charge transfer excited states (³MLCT_S→³MLCT_O). It is hoped that these results can provide valuable information for the excited state isomerization in photochromic d⁶ transition‐metal complexes, which is both experimentally and intellectually challenging as a field of study.     

Dual template method to prepare hierarchical porous carbon nanofibers for high-power supercapacitors

Hierarchical porous carbon nanofibers serving as electrode materials are prepared through carbonization and hydrofluoric acid treatment of polyacrylonitrile-based electrospinning involving dual templates. The hierarchical porous structures are synergistically tailored by varying template contents in the spinning solution. The carbon nanofibers prepared from the electrospinning of polyacrylonitrile containing 15/15 wt.% polymethylmethacrylate/tetraethyl orthosilicate exhibit the largest specific surface area (699 m² g^?1) and microporous volume (0.196 cm³ g^?1). In 6 M KOH electrolyte, a symmetrical supercapacitor equipped with the hierarchical porous carbon nanofibers demonstrates its high-end specific capacitance of 170 F g^?1, superior rate capability, and high-power density output up to 14.7 kW kg^?1. Cycling evolution indicates capacitance fading is only 5.8 % of initial capacitance at a current density of 1 A g^?1 even after 8,000 cycles. The excellent electrochemical performances of the carbon nanofiber are mainly ascribed to the optimized pore size distributions of both micropores and mesopores and the unique hierarchical pore structures possessed by abundant micropores.     

Hydrophilic microsphere based mesoscopic-lens microscope (MMM)

By increasing the hydrophilicity of microsphere, the evaporation of liquid around the microsphere will be evidently eliminated, so that the droplet can remain stable, and it is more feasible to introduce the liquid immersed MMM system in practical utilizations that require long-time observation. Compared with the non-immersed one, the liquid immersed MMM system performs better in various aspects, and it is convenient to choose microspheres on a wider scale.     

Electrochemical Signal Enhancer Fabricated Using Lysine‐rich Peptide for Ultrasensitive Electrochemical DNA Biosensor Analysis

Here we present a novel design of electrochemical signal enhancer to increase the detection sensitivity of electrochemical DNA biosensors. The key element of this enhancer is a lysine‐rich peptide (LRP). Its C‐terminal is conjugated with a planer molecule, being able to intercalate into the base pairs of probe‐target duplexes. The lysine residues of LRP are covalently linked with electrochemical signal indicators, acting as an assembly of electrochemical signal indicators. Experimental results proved the feasibility of the novel design. We have examined the effects of the numbers of lysine residues and the hybridization conditions on the detection sensitivity. The optimization procedures have led to significant sensitivity enhancement, and the LOD (limit of detection) has been determined to be 1.4 amol. This enhancer demonstrates advantages of easy operation, simple instrumentation, and high exemption from environmental influence.