Laser texturing is a novel technique that may be used to texture a cold roller in the process of manufacturing high quality steel sheets. With the aim of improving the quality of the textured roller by using a CO2 laser, a new laser beam modulating device is proposed. An optical beam expander with a fast rotating chopper system is designed. The laser pulse is split into two parts by the chopper blades; one is the preheating pulse that is reflected onto optical loop mirrors; the other is the directly transmitted pulse that creates the craters at the preheated spots. The preheating beam focus spot size and position can be adjusted. The focusing characteristics and optical parameter compensation for the flying optics are investigated. The heat transfer and melt process of laser texturing are numerically simulated. The effects of the double pulses on the texturing are analyzed. The effect of preheating the sample ahead of the laser texturing pulse is examined. The surface profile and bump hardness show improvements by using this approach. 相似文献
Transmission behavior of light through a grating consisting of n-doped semiconductor with subwavelength slits under the application of external static magnetic fields is investigated. As dielectric constant of n-doped semiconductor can be substantially altered by applied magnetic field, in the Voigt configuration and for TM-polarized illumination, two transmission resonance peaks associated with localized waveguide modes of slits are significantly shifted toward the lower frequency regime with the increase of the applied magnetic field. These characteristics can be assigned to a reduction of effective plasma frequency of n-doped semiconductor under the applied magnetic field. Our findings may provide possibility for achieving tunable transmission resonance spectrum. 相似文献
ZnO/Si thin films were prepared by rf magnetron sputtering method and some of the samples were treated by rapid thermal annealing (RTA) process at different temperatures ranging from 400 to 800 °C. The effects of RTA treatment on the structural properties were studied by using X-ray diffraction and atomic force microscopy while optical properties were studied by the photoluminescence measurements. It is observed that the ZnO film annealed at 600 °C reveals the strongest UV emission intensity and narrowest full width at half maximum among the temperature ranges studied. The enhanced UV emission from the film annealed at 600 °C is attributed to the improved crystalline quality of ZnO film due to the effective relaxation of residual compressive stress and achieving maximum grain size. 相似文献
Although recent studies have revealed that degree heterogeneity of a complex network has significant impact on the network performance and function, a unified definition of the heterogeneity of a network with any degree distribution is absent. In this paper, we define a heterogeneity index 0≤H<1 to quantify the degree heterogeneity of any given network. We analytically show the existence of an upper bound of H=0.5 for exponential networks, thus explain why exponential networks are homogeneous. On the other hand, we also analytically show that the heterogeneity index of an infinite power law network is between 1 and 0.5 if and only if its degree exponent is between 2 and 2.5. We further show that for any power law network with a degree exponent greater than 2.5, there always exists an exponential network such that both networks have the same heterogeneity index. This may help to explain why 2.5 is a critical degree exponent for some dynamic behaviors on power law networks. 相似文献
La1−xCaxMnO3+δ (0.0?x?1.0) samples were prepared and their resistivity and Seebeck coefficients were measured in the high-temperature range. Ca doping changes the ratio of Mn3+/Mn4+ and influences the electronic transport behavior markedly. With the increase of Ca concentration, the samples change from a p-type semiconductor to an n-type one and Seebeck coefficient becomes increasingly negative. Low doping (x=0.2) and high doping (x=0.8) induces the drop of the resistivity compared with undoped LaMnO3+δ and CaMnO3+δ samples due to the rise of carrier concentration. However, the resistivity of moderate-doped samples (x=0.4, 0.6) is larger than low- and high-doped samples because dopant scattering decreases carrier mobility. 相似文献
Journal of Radioanalytical and Nuclear Chemistry - To achieve the application of artificial plasma technology in high technology, the desorption behavior of cesium metals with low ionization... 相似文献
Accidental leakage of automobile oils is of great inclination to initiate pool fires in engine compartment, with threats to induce the flashover of other components and flame penetration into the passenger compartment. This paper presents experimental results of the ignition and burning behaviors of a kind of automobile oils (automatic transmission oil) using a cone calorimeter. Measurements of oil temperature, ignition time, mass loss and heat release rate are performed at different external heat fluxes and initial fuel depths. The comparison between experimental and numerical oil temperature evolutions shows that the variations of the ignition time at different experimental conditions depend on the heat dissipation process inside the liquid phase. The steady mass burning rate is nearly independent of initial fuel depth and has a linear relation with external heat fluxes. In addition, the results indicate an increase in peak heat release rate by a large margin initially, followed by a relatively small margin under thicker initial fuel depths, while its variations are proportional to external heat fluxes. Correlations are also developed to determine the peak heat release rate as a function of the initial fuel depth.
In order to investigate the characteristics of force chains in a granular flow system, a parallel plate shear cell is constructed to simulate the shear movement of an infinite parallel plate and observe variations in relevant parameters. The shear dilatancy process is divided into three stages, namely, plastic strain, macroscopic failure, and granular recombination. The stickslip phenomenon is highly connected with the evolution of force chains during the shear dilatancy process. The load–distribution rate curves and patterns of the force chains are utilized to describe the load-carrying behaviors and morphologic changes of force chains separately. Force chains, namely, “diagonal gridding,” “tadpole-shaped,” and “pinnate” are defined according to the form of the force chains in the corresponding three stages. 相似文献
Bergman cyclization has shown great promise in constructing conjugated polymers.However,the application of this reaction in polymer science is still limited due to the harsh reaction condition and ill-defined structure of the achieved polymers.To this end,the cycloaromatization polymerization of enediynes catalyzed by a series of transition metal catalysts is investigated in this work,by taking advantage of the coordination chemistry of the enediyne with the transition metal complexes.According to the nuclear magnetic resonance (NMR),Fourier transform infrared (FTIR),ultraviolet-visble (UV-Vis) spectroscopies and matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF MS) analysis,the cycloaromatization polymerization of enediynes proceeds under milder conditions and in a more controlled manner in the presence of palladium(Ⅱ) complexes,giving structurally regulated conjugated polymers in high yields. 相似文献