Interfacial Charge Transfer Induced Electronic Property Tuning of MoS_2 by Molecular Functionalization

The modulation of electrical properties of MoS_2 has attracted extensive research interest because of its potential applications in electronic and optoelectronic devices.Herein,interfacial charge transfer induced electronic property tuning of MoS_2 are investigated by in situ ultraviolet photoelectron spectroscopy and x-ray photoelectron spectroscopy measurements.A downward band-bending of MoS_2-related electronic states along with the decreasing work function,which are induced by the electron transfer from Cs overlayers to MoS_2,is observed after the functionalization of MoS_2 with Cs,leading to n-type doping.Meanwhile,when MoS_2 is modified with 2,3,5,6-tetrafluoro-7,7,8,8-tetracyanoquinodimethane(F_4-TCNQ),an upward band-bending of MoS_2-related electronic states along with the increasing work function is observed at the interfaces.This is attributed to the electron depletion within MoS_2 due to the strong electron withdrawing property of F_4-TCNQ,indicating p-type doping of MoS_2.Our findings reveal that surface transfer doping is an effective approach for electronic property tuning of MoS_2 and paves the way to optimize its performance in electronic and optoelectronic devices.     

Nonlinear Modeling Study of Aerodynamic Characteristics of an X38-like Vehicle at Strong Viscous Interaction Regions

Strong viscous interaction and multiple flow regimes exist when vehicles fly at high altitude and high Mach number conditions. The Navier–Stokes(NS) solver is no longer applicable in the above situation. Instead, the direct simulation Monte Carlo (DSMC) method or Boltzmann model equation solvers are usually needed. However, they are computationally more expensive than the NS solver. Therefore, it is of great engineering value to establish the aerodynamic prediction model of vehicles at high altitude and high Mach number conditions. In this paper, the hypersonic aerodynamic characteristics of an X38-like vehicle in typical conditions from 70 km to 110 km are simulated using the unified gas kinetic scheme (UGKS), which is applicable for all flow regimes. The contributions of pressure and viscous stress on the force coefficients are analyzed. The viscous interaction parameters, Mach number, and angle of attack are used as independent variables, and the difference between the force coefficients calculated by UGKS and the Euler solver is used as a dependent variable to establish a nonlinear viscous interaction model between them in the range of 70–110 km. The evaluation of the model is completed using the correlation coefficient and the relative orthogonal distance. The conventional viscous interaction effect and rarefied effect are both taken into account in the model. The model can be used to quickly obtain the hypersonic aerodynamic characteristics of X38-like vehicle in a wide range, which is meaningful for engineering design.     

The relation between chemical structure of dicarboxylic dihydrazide compounds and nucleation effect in isotactic polypropylene

Journal of Thermal Analysis and Calorimetry - A series of dicarboxylic dihydrazide compounds (DCDH-R-n) were prepared and used as nucleating agents for isotactic polypropylene (iPP). To investigate...     

Synthesis of Conjugated Polymers via Transition Metal Catalysed C−H Bond Activation

Transition metal catalysed C−H bond activation chemistry has emerged as an exciting and promising approach in organic synthesis. This allows us to synthesize a wider range of functional molecules and conjugated polymers in a more convenient and more atom economical way. The formation of C−C bonds in the construction of pi-conjugated systems, particularly for conjugated polymers, has benefited much from the advances in C−H bond activation chemistry. Compared to conventional transition-metal catalysed cross-coupling polymerization such as Suzuki and Stille cross-coupling, pre-functionalization of aromatic monomers, such as halogenation, borylation and stannylation, is no longer required for direct arylation polymerization (DArP), which involve C−H/C−X cross-coupling, and oxidative direct arylation polymerization (Ox-DArP), which involves C−H/C−H cross-coupling protocols driven by the activation of monomers’ C(sp²)−H bonds. Furthermore, poly(annulation) via C−H bond activation chemistry leads to the formation of unique pi-conjugated moieties as part of the polymeric backbone. This review thus summarises advances to date in the synthesis of conjugated polymers utilizing transition metal catalysed C−H bond activation chemistry. A variety of conjugated polymers via DArP including poly(thiophene), thieno[3,4-c]pyrrole-4,6-dione)-containing, fluorenyl-containing, benzothiadiazole-containing and diketopyrrolopyrrole-containing copolymers, were summarized. Conjugated polymers obtained through Ox-DArP were outlined and compared. Furthermore, poly(annulation) using transition metal catalysed C−H bond activation chemistry was also reviewed. In the last part of this review, difficulties and perspective to make use of transition metal catalysed C−H activation polymerization to prepare conjugated polymers were discussed and commented.     

Manipulation of Organic Afterglow by Thermodynamic and Kinetic Control

The fabrication of room-temperature organic phosphorescence and afterglow materials, as well as the transformation of their photophysical properties, has emerged as an important topic in the research field of luminescent materials. Here, we report the establishment of energy landscapes in dopant-matrix organic afterglow systems where the aggregation states of luminescent dopants can be controlled by doping concentrations in the matrices and the methods of preparing the materials. Through manipulation by thermodynamic and kinetic control, dopant-matrix afterglow materials with different aggregation states and diverse afterglow properties can be obtained. The conversion from metastable aggregation state to thermodynamic stable aggregation state of the dopant-matrix afterglow materials to leads to the emergence of intriguing afterglow transformation behavior triggered by thermal and solvent annealing. The thermodynamically unfavorable reversible afterglow transformation process can also be achieved by coupling the dopant-matrix afterglow system to mechanical forces.     

Free volume characteristics of 2,2-bistrifluoromethyl-4,5-difluoro-1,3-dioxole-co-tetrafluoroethylene copolymers: Effect of composition and molecular weight

2,2-bistrifluoromethyl-4,5-difluoro-1,3-dioxole-co-tetrafluoroethylene (PDD-TFE) copolymer is a good candidate to prepare gas separation membranes with excellent permeability due to its free volume characteristics. However, the influence of PDD-TFE copolymer structure on its free volume characteristics is less studied. In this paper, PDD-TFE copolymers with different compositions and molecular weights were synthesized, and their free volume characteristics were analyzed by positron annihilation lifetime spectroscopy and a molecular dynamics simulation. It indicated that the molar fraction of PDD in copolymers had a significant effect on free volume characteristics, while the molecular weight of copolymers exerted a slight influence on free volume when the molecular weight exceeded a critical region (intrinsic viscosity [η] > 68 ml g⁻¹). PDD-TFE copolymers with greater PDD molar fractions (i.e., 72% and 84%) showed bimodal distributions in positron lifetime and free volume size distributions, while PDD-TFE copolymers with lower PDD molar fractions (i.e., 27% and 35%) exhibited a single peak. The long-lifetime parameter τ₃ was assigned to micro-cavities formed by [-(TFE)_y-PDD-] segments and τ₄ was attributed to micro-cavities formed by [-(PDD)_x-TFE-] segments. The cis and trans transitions of PDD led to a local multilayer spiral structure with a 2.6–4.3 Å layer spacing, which would also increase the free volume of copolymers.     

A luminescent Zn(II)-Containing Complex: Selective Sensing of Cr(VI) Anion and Application Values on Tuberculosis Care Through Increasing the Antibacterial Response of Macrophages

Journal of Fluorescence - A new Zn(II)-bearing metal-organic framework (MOF), namely, {[Zn2(L)2(H2O)]·8H2O·DMF}n (1) has been generated via applying...     

Heating induced aggregation in non-fullerene organic solar cells towards high performance

Molecular ordering within the photoactive layer plays a crucial role in determining the device performance of organic solar cells(OSCs).However,the simultaneous molecular ordering processes of polymer donors and non-fullerene acceptors(NFAs)during solution casting usually bring confinement effect,leading to insufficient structural order of photovoltaic components.Herein,the molecular packing of mINPOIC NFA is effectively formed through a heating induced aggregation strategy,with the aggregation of PBDB-T,which has a strong temperature dependence,is retarded by casting on a preheated substrate to reduce its interference toward m-INPOIC.A sequent thermal annealing treatment is then applied to promote the ordering of PBDB-T and achieve balanced aggregation of both donors and acceptors,resulting in the achievement of a maximum efficiency of 13.9% of PBDB-T:m-INPOIC binary OSCs.This work disentangles the interactions of donor polymer and NFA during the solution casting process and develops a rational strategy to enhance the molecular packing of NFAs to boost device performance.     

超级微波消解电感耦合等离子体质谱法 测定土壤中13种元素

建立了超级微波消解-电感耦合等离子体质谱（ICP-MS）测定多类型土壤基质中钒、铬、锰、钴、镍、铜、锌、砷、钼、锑、铊、铅和铀等13种元素含量的方法。采用超级微波消解法对样品进行前处理,比较了超级微波前处理与常规微波前处理消解效果,并优化了消解酸体系。在最优条件下,13种元素的的方法检出限（LOD）为0.0002~0.2 mg/kg,方法定量限（LOQ）范围为0.001~0.6mg/kg。在0~500 μg/L范围内线性回归系数（R2）在0.9996~1.0000,各元素加标回收率在76.3%~126%,此方法准确度可以满足复杂基体样品多元素同时测定的需求,一次样品前处理可实现18个样品的同时测定,相较于常规前处理方法大幅减少酸使用的同时更加安全、高效、不易污染样品,可为土壤重金属污染监测工作提供可靠的分析方法支撑。