Pickering emulsion polymerization of graphene oxide-stabilized styrene

Polystyrene (PS) particles were prepared via Pickering emulsion polymerization using graphene oxide (GO) as the stabilizer. The results show that pH is an important factor in the stability of Pickering emulsions. The effects of two different phase initiators, the water phase initiator potassium persulfate and the oil phase initiator azobisisobutyronitrile, on the morphology of PS particles in Pickering emulsion polymerization had been investigated in detail. Wrinkled particles were prepared using the water phase initiator, and spherical particles were prepared using the oil phase initiator. In addition, hexadecane was used as the auxiliary stabilizer in the polymerization, which narrowed the diameter distribution of the PS spheres, and the hollow PS spheres were fabricated. The size of the GO particles also influenced the final morphology of the particles. Nano-sized polymer particles were grafted onto the surface of micro-sized GO. Small GO particles were suitable for Pickering emulsion polymerization to prepare the composite particles. The thermogravimetric analysis of the prepared particles confirmed that they were PS/GO composite particles, which could have a wide range of potential applications, such as in catalysts, sensors, environmental remediation, and energy storage.     

Rutile TiO2 nanowires on anatase TiO2 nanofibers: a branched heterostructured photocatalysts via interface-assisted fabrication approach

A water-dichloromethane interface-assisted hydrothermal method was employed to grow rutile TiO(2) nanowires (NWs) on electrospun anatase TiO(2) nanofibers (NFs), using highly reactive TiCl(4) as precursor. The water-dichloromethane interface inhibited the formation of rutile NWs in water phase, but promoted the selective radial growth of densely packed rutile NWs on anatase NFs to form a branched heterojunction. The density and length of rutile NWs could be readily controlled by varying reaction parameters. A formation mechanism for the branched heterojunction was proposed which involved (1) the entrapment of rutile precursor nanoparticles at water-dichloromethane interface, (2) the growth of rutile NWs on anatase NFs via Ostwald ripening through the scavengering of interface-entrapped rutile nanoparticles. The heterojunction formed at anatase NF and rutile NW enhanced the charge separation of both under ultraviolet excitation, as evidenced by photoluminescence and surface photovoltage spectra. The branched TiO(2) heterostructures showed higher photocatalytic activity in degradation of rodamine B dye solution than anatase NFs, and the mixture of anatase NFs, and P25 powders, which was discussed in terms of the synergistic effect of enhanced charge separation by anatase-rutile heterojunction, high activity of rutile NWs, and increased specific area of branched heterostructures.     

超声检查在孕妇产前诊断中的应用价值

选择2460例孕妇为研究对象,探讨超声检查在孕妇产前诊断中的应用价值.孕妇20?28孕周时利用超声心电图对胎儿的先天性心脏病进行诊断,11?32孕周时利用超声对畸形胎儿进行检查,18?23孕周时对超声提示结构畸形的孕妇进行染色体侵入检查.结果发现,最终诊断出110例先天性心脏病胎儿,超声心电图检查共检出102例,诊断准...     

近红外光谱分析仪校准方法的探讨

通过对各种近红外光谱分析仪进行系统的测试和论证,初步建立了一套近红外光谱分析仪的校准方法.该方法各项指标评价结果符合仪器的设计性能及实际测试工作要求.     

γ-射线辐射活性自由基聚合研究

本文对γ- 射线辐射条件下的活性自由基聚合反应研究及进展进行了综述。虽然γ- 射线辐射引发聚合反应通常是不可控的,但在有机硫化物,如二硫代羧酸酯或三硫代碳酸酯存在下,则成功地实现了可控/活性自由基聚合。聚合过程中聚合物分子量随单体转化率线性增长,不但可控,且分布窄,也可以用于合成嵌段共聚物。有机硫化物对聚合反应控制起着关键性作用,硫化物的结构对于γ- 射线辐射活性自由基聚合行为的影响显著。γ- 射线辐射聚合的突出优点是可在室温或更低的温度下实施,且不需要加入引发剂。在环硫化合物存在下,获得了环形聚合物;而且使热和光敏感的叠氮类单体实现了活性聚合。