Simulation of current spreading for GaN-based light-emitting diodes

Uniform current spreading is crucial for the performance of light-emitting diodes (LEDs). It has been reported that the reliability and light distribution are affected by non-uniform current spreading. In this paper, the impact of different electrode patterns on the performance of LED chips is investigated. A hybrid modeling method is employed to analyze the electrical and thermal characteristics of LEDs with two different electrode mesa structures. Corresponding experiments are also carried out to validate the calculation results. It is found that increasing amount of p-electrodes in interdigitated electrode patterns is effective in improving the performance of LEDs.     

Sputtered amorphous Co-Pt-P thin films for soft underlayer of perpendicular magnetic recording

In this paper, a novel amorphous Co-Pt-P thin film fabricated by DC sputtering was proposed for soft underlayer in perpendicular recording. The structural and magnetic properties of the films were investigated by X-ray diffraction (XRD) and vibrating sample magnetometer (VSM), respectively. The results show that maximum permeability of Co-12 at%Pt-P films sputtered at room temperature (RT) is quite low when the phosphorus content is less than 5.2 at%, but Co-12 at%Pt-7 at%P thin film, is of amorphous state and has a high permeability of ∼500. The excellent soft magnetic properties of maximum permeability (500), coercivity (18 Oe) and saturation magnetization (760 emu/cm³) indicate that the amorphous Co-12 at%Pt-7 at%P film is expected to be a promising soft magnetic underlayer of perpendicular magnetic recording. The Co-12 at%Pt-7 at%P thin film is gradually crystallized with increasing substrate temperatures. The crystallization temperature of the Co-12 at%Pt-7 at%P thin film is ∼200 °C.     

Generation of infrared entangled light in asymmetric semiconductor quantum wells

We proposed a scheme to achieve two-mode CV entanglement with the frequencies of entangled modes in the infrared range in an asymmetric semiconductor double-quantum-wells (DQW), where the required quantum coherence is obtained by inducing the corresponding intersubband transitions (ISBTs) with a classical field. By numerically simulating the dynamics of system, we show that the entanglement period can be prolonged via enhancing the intensity of classical field, and the generation of entanglement doesn't depend intensively on the initial condition of system in our scheme. Moreover, we also show that a bipartite entanglement amplifier can be realized in our scheme. The present research provides an efficient approach to achieve infrared entangled light in the semiconductor nanostructure, which may have significant impact on the progress of solid-state quantum information theory.     

The fabrication of superhydrophobic copper films by a low-pressure-oxidation method

The lotus-leaf-like superhydrophobic copper was fabricated by a facile two-step method without the chemical modification, on which the water contact angle can reach 158° and the water-sliding angle is less than 10°. Reversible superhydrophobicity to superhydrophilicity transition was observed and controlled by alternation of UV irradiation and dark storage. More interestingly, the superhydrophobic surface exhibits superoleophilicity and all those properties can be well used in reversible switch, separating the water and oil and so on.     

干涉型全保偏光纤水听器阵列研制

报道了干涉型全保偏光纤水听器阵列的研究结果。在详细介绍全保偏光纤水听器基元结构和性能基础上,描述了四基元阵列结构和特性,给出了光纤水听器基元相对接收灵敏度的频率响应和阵列指向性的测量结果。同时指出光纤水听器与传统压电换能器在性能指标、信号传输和处理等方面的差异。     

超声法制备碳量子点发光性能的影响因素分析

超声法制备碳量子点过程简单,成本低廉,不易产生二次污染,应用前景广泛。为优化超声法制备碳量子点的各工艺参数,制备了关键工艺参数不同的碳量子点样品,测试其发射与激发光谱,分析了量子点浓度,溶剂种类,辅助剂种类、浓度,超声功率、时间等参数对碳量子点发光性能影响。结果表明超声法制备的碳量子点具有激发光波长依赖性,发射峰位置随激发波长的变化而发生明显改变;碳量子点浓度增加,发光强度由于非辐射能量传递和团聚作用,先增大后减小;由于溶剂效应,碳量子点在乙醇中比在水中发光强度更强,波长更短,且浓度越大时波峰移动越明显;相比盐酸,以NaOH为辅助剂制备的碳量子点表面钝化程度高,发光强度强;增加辅助剂NaOH浓度可提高量子点表面钝化程度,增大发光强度;同等时间下增加超声功率或同等功率下适量增加超声时间,可制备更多的碳量子点样品,但超声时间过长,碳量子点容易发生团聚猝灭现象。以上影响因素分析为超声法制备碳量子点的工艺参数优化提供了理论基础,有利于碳量子点大规模低成本的生产应用。     

C60醛类衍生物非线性光学特性研究

研究了加合不同取代基团的C60醛类衍生物的光学非线性性质。利用简并四波混频（DFMW）方法获得了C60醛类各衍生物的三阶光学非线性超级化率γ^(3)及相应的三阶光学非线性系数χ^(3)值。同时也研究了它们各自的光限幅特性。结果表明：不同的取代基对C60醛类衍生物三阶光学非线性及光限幅特性的影响不同。     

Afterglow工作模式下ECR离子源脉冲束的产生

为满足国家大科学工程兰州重离子冷却储存环的要求,在14.5GHz ECR 离子源上进行afterglow工作模式的实验,首次产生了高电荷态脉冲束流Ar¹¹⁺和Ar¹²⁺,给出了初步实验结果,并对结果进行了分析和解释.     

光纤光栅法布里-珀罗腔的V-I传输矩阵法研究

快速有效地获得多级联光纤光栅法布里-珀罗(F-P)腔的光谱特性,是优化设计基于上述结构建立的级联多波长激光器、放大器等各种光器件以及复杂分布式传感网络的重要基础和保障.将V-I传输矩阵法用于光纤光栅F-P腔反射光谱特性的分析,并建立了V-I传输矩阵模型.采用该模型对三种不同结构的光纤光栅F-P腔在不同参数下的光谱特性进行分析,并与传统多层膜法的分析结果相比较,表明V-I传输矩阵法能够在保证分析精度的前提下大大节省运算时间.实验结果表明,V-I传输矩阵法对光纤光栅F-P腔谱特性的分析结果比耦合模法更准确.     

单晶Cu(001)薄膜塑性变形的分子动力学模拟

使用分子动力学方法,模拟研究了单晶Cu(001)薄膜在双向等轴拉伸应变下的塑性变形行为.当应变超过一定值时,样品通过产生位错、层错及孪晶而发生塑性变形.当应变相对较低时,不全位错首先在薄膜表面形核并在密排面上滑移,留下堆积层错;当应变增加时,位错在表面与内部同时成核生长,层错数量也随之增加.分析了相邻滑移面上的位错之间相互作用形成孪晶的微观过程.材料内部形成大量堆积层错及孪晶后,较大孪晶的密排面上的原子也会发生滑移,形成孪晶内部的层错结构以释放残余应力.