Analytical determination of specific 4,4′-methylene diphenyl diisocyanate hemoglobin adducts in human blood

4,4′-Methylene diphenyl diisocyanate (MDI) is one of the most important isocyanates in the industrial production of polyurethane and other MDI-based synthetics. Because of its high reactivity, it is known as a sensitizing agent, caused by protein adducts. Analysis of MDI is routinely done by determination of the nonspecific 4,4′-methylenedianiline as a marker for MDI exposure in urine and blood. Since several publications have reported specific adducts of MDI and albumin or hemoglobin, more information about their existence in humans is necessary. Specific adducts of MDI and hemoglobin were only reported in rats after high-dose MDI inhalation. The aim of this investigation was to detect the hemoglobin adduct 5-isopropyl-3-[4-(4-aminobenzyl)phenyl]hydantoin (ABP-Val-Hyd) in human blood for the first time. We found values up to 5.2 ng ABP-Val-Hyd/g globin (16 pmol/g) in blood samples of workers exposed to MDI. Because there was no information available about possible amounts of this specific MDI marker, the analytical method focused on optimal sensitivity and selectivity. Using gas chromatography–high-resolution mass spectrometry with negative chemical ionization, we achieved a detection limit of 0.02 ng ABP-Val-Hyd/g globin (0.062 pmol/g). The robustness of the method was confirmed by relative standard deviations between 3.0 and 9.8 %. Combined with a linear detection range up to 10 ng ABP-Val-Hyd/g globin (31 pmol/g), the enhanced precision parameter demonstrates that the method described is optimized for screening studies of the human population.     

Synthesis of gemini surfactants with twelve symmetric fluorine atoms and one singlet F MR signal as novel F MRI agents

A family of fluorinated gemini surfactants derived from perfluoropinacol has been synthesized as novel ¹⁹F magnetic resonance imaging (¹⁹F MRI) agents. These fluorinated surfactants with 12 symmetric fluorine atoms and one singlet ¹⁹F MR peak can be conveniently prepared from perfluoropinacol and oligo(ethylene glycols) on multi-gram scales. Solubility, hydrophilicity (log P), and critical micelle concentration (CMC) measurements of these fluorinated surfactants indicated that high aqueous solubility can be achieved by introducing oligo(ethylene glycols) with appropriate length into perfluoropinacol, i.e., manipulating the fluorine content (F%). One of these fluorinated surfactants with high aqueous solubility and excellent ¹⁹F MR properties has been identified by ¹⁹F MRI phantom experiments as a promising ¹⁹F MRI agent.     

Single‐electron transfer‐living radical polymerization of oligo(ethylene oxide) methyl ether methacrylate in the absence and presence of air

The efficient Cu(0) wire‐catalyzed single‐electron transfer‐living radical polymerization (SET‐LRP) of oligo(ethylene oxide) methyl ether methacrylate (OEOMA) in DMSO and binary mixtures of DMSO with H₂O is reported. Addition of 10–80% H₂O to DMSO resulted in an increase in the apparent rate constant of propagation ( ), corresponding to an increase in the polarity and extent of disproportionation. At higher H₂O content, decreases, and in H₂O is slightly lower than that in DMSO. This unexpected behavior was attributed to the physical inaccessibility of Cu(0) wire catalyst to the hydrophobic reactive centers of OEOMA and initiator which self‐assemble in H₂O into micellar aggregates and vesicles. This hypothesis was confirmed by the faster polymerization in H₂O than in DMSO during catalysis with Cu(0) nanoparticles generated by disproportionation of CuBr. SET‐LRP of OEOMA can be performed in protic and dipolar aprotic solvents in air by the addition of hydrazine hydrate. The polymerization exhibited no induction period and identical as in the degassed experiment, and led to polymers with narrow molecular weigh distribution. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 3110–3122     

Gadolinium(III)‐Hydroxy Ladders Trapped in Succinate Frameworks with Optimized Magnetocaloric Effect

Two kinds of inorganic gadolinium(III)‐hydroxy “ladders”, [2×n] and [3×n], were successfully trapped in succinate (suc) coordination polymers, [Gd₂(OH)₂(suc)₂(H₂O)]_n ? 2n H₂O ( 1 ) and [Gd₆(OH)₈(suc)₅(H₂O)₂]_n ? 4n H₂O ( 2 ), respectively. Such coordination polymers could be regarded as alternating inorganic–organic hybrid materials with relatively high density. Magnetic and heat capacity studies reveal a large cryogenic magnetocaloric effect (MCE) in both compounds, namely (ΔH=70 kG) 42.8 J kg^?1 K^?1 for complex 1 and 48.0 J kg^?1 K^?1 for complex 2 . The effect of the high density is evident, which gives very large volumetric MCEs up to 120 and 144 mJ cm^?3 K^?1 for complexes 1 and 2 , respectively.     

Simulation of nuclide migration in a middle- and low-level radioactive waste repository based on GMS

Journal of Radioanalytical and Nuclear Chemistry - Groundwater is the most important factor contributing to the diffusion and migration of radionuclides in the repository. In this paper, the...     

铀酰与羧酸和肟基类配体相互作用的理论研究

深入了解各种功能基团与铀酰离子的络合行为有助于设计和开发高效海水提铀吸附剂. 本工作通过密度泛函理论(DFT)方法系统地研究了两种典型铀酰络合配体吡啶-2,6-二羧酸(H₂DPA)和戊二酰偕亚胺二肟(H₂A)与铀酰离子及碳酸根离子形成的配合物的结构、成键性质以及热力学稳定性. 研究结果表明, 所有配合物中, 配体与铀酰离子之间具有不同强度的共价相互作用. 由于H₂A配位时发生了质子重排, 而且配体的解离能较高, 使其更难与[UO₂(CO₃)₃]^4-发生取代反应, 因此H₂DPA配体是海水提铀中一种潜在的有效配体. 本工作的相关研究结果为海水提铀中高效吸附基团的设计和开发提供了理论线索.     

Reversible Photoinduced Conversion of Unprecedented Norbornadiene-Based Photoswitches with Redox-Active Naphthalene Diimide Functionalities

An unprecedented compound class of functional organic hybrids consisting of a photoswitchable norbornadiene building block and a redoxactive chromophore, namely naphthalene diimide, were designed and synthesized. Within these structures the capability of rylene chromophores to function as a redox active catalyst upon their photoexcitation was utilized to initiate the oxidative back-conversion of the in situ formed quadricyclane unit to its norbornadiene analogue. In this way successive photoexcitation at two different wavelengths enabled a controlled photoswitching between the two isomerical states of the hybrids. Beyond this prove of concept, the dependency of the reaction rate to the intramolecular distance of the two functional molecular building blocks as well as the concentration of the photoexcited sample was monitored. The experimental findings and interpretations were furthermore supported by quantum chemical investigations.     

Enhanced Crystal Quality of Perovskite via Protonated Graphitic Carbon Nitride Added in Carbon-Based Perovskite Solar Cells

The quality of perovskite layers has a great impact on the performance of perovskite solar cells (PSCs). However, defects and related trap sites are generated inevitably in the solution-processed polycrystalline perovskite films. It is meaningful to reduce and passivate the defect states by incorporating additive into the perovskite layer to improve perovskite crystallization. Here an environmental friendly 2D nanomaterial protonated graphitic carbon nitride (p-g-C\begin{document}$_3$\end{document}N\begin{document}$_4$\end{document}) was successfully synthesized and doped into perovskite layer of carbon-based PSCs. The addition of p-g-C\begin{document}$_3$\end{document}N\begin{document}$_4$\end{document} into perovskite precursor solution not only adjusts nucleation and growth rate of methylammonium lead tri-iodide (MAPbI\begin{document}$_3$\end{document}) crystal for obtaining flat perovskite surface with larger grain size, but also reduces intrinsic defects of perovskite layer. It is found that the p-g-C\begin{document}$_3$\end{document}N\begin{document}$_4$\end{document} locates at the perovskite core, and the active groups -NH\begin{document}$_2$\end{document}/NH\begin{document}$_3$\end{document} and NH have a hydrogen bond strengthening, which effectively passivates electron traps and enhances the crystal quality of perovskite. As a result, a higher power conversion efficiency of 6.61% is achieved, compared with that doped with g-C\begin{document}$_3$\end{document}N\begin{document}$_4$\end{document} (5.93%) and undoped one (4.48%). This work demonstrates a simple method to modify the perovskite film by doping new modified additives and develops a low-cost preparation for carbon-based PSCs.     

Ultrahigh-intensity optical slow-wave structure

We report the development of corrugated "slow-wave" plasma guiding structures with application to quasiphase-matched direct laser acceleration of charged particles and generation of a wide spectrum of electromagnetic radiation. These structures support guided propagation at intensities up to 2 x 10(17) W/cm(2), limited by our current laser energy and side leakage. Hydrogen and argon plasma waveguides up to 1.5 cm in length with corrugation period as short as 35 microm are generated in a cryogenic cluster jet. Experimental data are consistent with simulations showing periodic modulations of the laser pulse intensity.     

NiS助催化剂的硫调控光沉积合成及其增强g-C3N4的光催化产氢性能

作为一种非金属聚合半导体,石墨相氮化碳(g-C3N4)具有特殊的能带结构、可见光响应能力以及优良的物理化学性质以及生产成本低等特点,因而已成为目前光催化领域的研究热点.然而,由于g-C3N4被光激发的电子与空穴极易复合,导致g-C3N4材料的光催化性能并不理想.而助剂修饰是实现光生载流子有效分离以提高光催化活性的有效途径.众所周知,贵金属Pt可以作为光催化产氢的反应位点,但高昂的成本限制了它的实际应用.所以,开发高效的非贵金属助剂很有必要.近年来,NiS作为优良的电子助剂在光催化领域受到广泛关注.大量研究表明,NiS可以作为g-C3N4的产氢活性位点用于提高其光催化产氢性能.NiS助剂主要是通过水热、煅烧和液相沉淀的方法修饰在g-C3N4的表面上.相较而言,助剂的光沉积方法具有一些独特的优势,例如节能、环保、简易并且能够实现其原位牢固地沉积在光催化剂的表面.然而g-C3N4光生电子和空穴强还原和氧化能力容易导致像Ni^2+的还原和S^2-的氧化等副反应发生,因此NiS助剂很难光沉积在g-C3N4材料表面.本文采用硫调控的光沉积法成功合成了NiS/g-C3N4光催化材料,该法利用g-C3N4在光照条件下产生的光生电子结合S以及Ni^2+生成NiS,然后原位沉积在g-C3N4表面.由于E0(S/NiS)(0.096 V)比E0(Ni^2+/Ni)(-0.23 V)更正,所以NiS优先原位沉积在g-C3N4表面.因此,硫调控的光沉积法促进了NiS的生成,并抑制了金属Ni等副反应的形成.通过X射线光电子能谱分析NiS/g-C3N4的表面化学态,表明该方法能成功地将NiS修饰在g-C3N4的表面,这也得到透射电镜和高分辨透射电镜结果的证实.光催化产氢的结果表明,NiS/g-C3N4光催化剂实现了良好的光催化性能,其最优产氢速率(244μmol h^?1 g^?1)接近于1 wt%Pt/g-C3N4(316μmol h^?1 g^?1).这是因为硫调控的光沉积法实现NiS助剂在g-C3N4表面的修饰,从而促进光生电子与空穴的有效分离,进而提高光催化制氢效率.此外,在该方法中,NiS的形成通常在g-C3N4光生电子的表面传输位点上,因此也能够使NiS提供更多的活性位点以提高界面产氢催化反应速率.电化学表征结果也进一步证明NiS/g-C3N4光催化剂加快了电子与空穴的分离和转移.更重要的是,这种简易且通用的方法还可以实现CoSx,CuSx,AgSx对g-C3N4的助剂修饰,并且都提高了g-C3N4的光催化产氢性能,表明该方法具有一定的普适性,为高效光催化材料的合成提供了新的思路.