Stress test for a technology credit guarantee fund based on survival analysis

A technology credit guarantee policy has been established to provide financial support to technology-based SMEs with a limited asset base. For an effective technology credit guarantee policy, risk management is essential. In this paper, we investigate a survival model that predicts start-up SMEs’ loan default probability at a given time based on technology attributes along with the economic environment and the firm’s characteristics at the time of the technology credit guarantee fund application. This, in turn, is used for the estimation of the technology fund risk along with a stress test. Our work is expected to contribute to reducing the risks associated with technology financing.     

基于波长双环路结构的新型光电振荡器的研究

提出了一种新型的基于波长双环路结构的光电振荡器方案. 在此方案中, 利用两个激光器产生两束波长不同的连续光, 分别通过两段长度不同的光纤构成双环路结构, 利用光学游标效应可以获得单一的起振模式. 通过理论分析可知, 不同波长的两束光载波在耦合时, 几乎不会产生随机拍噪声. 实验中, 获得了X波段(8-12 GHz)内频率可调谐的高质量微波信号. 通过测量, 信号的边模抑制比达到60 dB, 相位噪声为-132.6 dBc/Hz@10 kHz. 同时, 利用锁相环技术, 通过光纤拉伸器有效补偿系统的腔长漂移, 因此振荡频率的稳定性得到极大改善. 系统的频率漂移在2 h内小于±84.3 mHz. 另外, 测得的微波线宽为5.3 mHz, Q值在10¹²量级, 具有很高的谱纯度.     

强流碳纳米管阴极快脉冲重频发射特性

在Cu基底上, 采用催化热解生长法制备了石墨化程度较高的碳纳米管阴极. 当电子束能量达到1 MeV、梯度约为60 kV/ns时, 发射束流强度达到15 kA, 相应密度约为1 kA/cm², 束压、束流响应快, 波形间几无延时. 以50 Hz重复频率、约15 GW束功率强流发射时, 波形稳定, 随着频率增高, 稳定性降低. 发射炮次达1000后, 表面形貌保持完整、界面无脱附; 束压与束流基本满足空间电荷限制定律, 发射机理属闪络型等离子体发射, 等离子体速度约为3.9 cm/μs.     

Electron‐transfer transparency of graphene: Fast reduction of metal ions on graphene‐covered donor surfaces

The mechanism of charge transfer through nanomaterials such as graphene remains unclear, and the amount of charge that can be transferred from/to graphene without damaging its structural integrity is unknown. In this communication, we show that metallic nanoparticles can be decorated onto graphene surfaces as a result of charge transfer from the supporting substrate to an adjoining solution containing metal ions. Au or Pt nanoparticles were formed with relatively high yield on graphene‐coated substrates that can reduce these metal ions, such as Ge, Si, GaAs, Al, and Cu. However, metal ions were not reduced on graphene surfaces coated onto non‐reducing substrates such as SiO₂ or ZnO. These results confirm that graphene can be doped by exploiting charge transfer from the underlying substrate; thus graphene is not only transparent with respect to visible light, but also with respect to the charge transfer. (© 2015 WILEY‐VCH Verlag GmbH &Co. KGaA, Weinheim)     

过渡金属掺杂在Bi2Te3体系中诱导产生的磁性

用从头计算方法研究了在Bi₂Te₃体系采用过渡金属掺杂从而诱导出磁性的可能性．用一个过渡金属原子置换一个Bi原子之后,可以在该体系中产生磁矩,这主要是由于过渡金属原子的3d轨道电子的自旋极化导致的．当一个Ti、V、Cr、Mn和Fe原子分别替代一个Bi原子时,体系显示的磁矩分别为0.92、1.97、2.97、4.04和4.98 μ_B．当引入两个过渡金属原子代替两个Bi原子的时候,交换耦合的特性取决于取代Bi原子的分布;代替的Bi原子的位置在Bi1和Bi5的位置时,这两个过渡金属原子之间的距离为11.52 ?, Bi_1.84TM_0.16Te₃体系能量最稳定并且表现出铁磁性耦合．     

Access to Novel Graphene‐Like Sheet of Hydroboron: First‐Principles Investigation

We designed a cyclic borane (B₆H₁₂) molecule with a benzene‐like structure, in which the six B atoms are located in the same plane. Three methods of B3LYP, MP2, and CCSD with the 6‐311++G** basis were used to investigate its structure, electronic property, and stability. Next, we calculated the stability and electronic property of three hydroboron derivatives with fused rings of B₁₀H₁₈, B₁₄H₂₄, and B₁₆H₂₆. Finally, we investigated three types of novel two‐dimensional infinite hydroboron sheets with diborane as a building block. The results of the phonon spectra ensure the dynamic stability of these predicted structures. Furthermore, the three types of hydroboron sheets are shown to have different band gap energies of less than 3.0 eV. Some investigations on the optical properties have also been performed. The predicted sheets are candidates for semiconductors, whose band gap energy can be tuned by the positions of the bridge hydrogen atoms in the sheets.     

Target-driven DNA association to initiate cyclic assembly of hairpins for biosensing and logic gate operation

A target-driven DNA association was designed to initiate cyclic assembly of hairpins, which led to an enzyme-free amplification strategy for detection of a nucleic acid or aptamer substrate and flexible construction of logic gates. The cyclic system contained two ssDNA (S1 and S2) and two hairpins (H1 and H2). These ssDNA could co-recognize the target to produce an S1–target–S2 structure, which brought their toehold and branch-migration domains into close proximity to initiate the cyclic assembly of hairpins. The assembly product further induced the dissociation of a double-stranded probe DNA (Q:F) via toehold-mediated strand displacement to switch the fluorescence signal. This method could detect DNA and ATP as model analytes down to 21.6 pM and 38 nM, respectively. By designing different DNA input strands, the “AND”, “INHIBIT” and “NAND” logic gates could be activated to achieve the output signal. The proposed biosensing and logic gate operation platform showed potential applications in disease diagnosis.     

Exponential synchronization for fractional‐order chaotic systems with mixed uncertainties

This article focuses on the problem of exponential synchronization for fractional‐order chaotic systems via a nonfragile controller. A criterion for α‐exponential stability of an error system is obtained using the drive‐response synchronization concept together with the Lyapunov stability theory and linear matrix inequalities approach. The uncertainty in system is considered with polytopic form together with structured form. The sufficient conditions are derived for two kinds of structured uncertainty, namely, (1) norm bounded one and (2) linear fractional transformation one. Finally, numerical examples are presented by taking the fractional‐order chaotic Lorenz system and fractional‐order chaotic Newton–Leipnik system to illustrate the applicability of the obtained theory. © 2014 Wiley Periodicals, Inc. Complexity 21: 114–125, 2015     

Robust ℋ∞ tracking control for uncertain Markovian jumping systems with interval time‐varying delay

In this article, the problem of robust tracking control for a class of uncertain Markovian jump systems with interval time‐varying delay is investigated. Based on an augmented Lyapunov–Krasovskii functional with triple integral term, partitioning the delay's lower bound and reciprocally convex approach, delay‐dependent conditions for the existence of desired controller are achieved. Meanwhile, stability criteria for delayed Markovian jump systems are also provided with less conservativeness and less matrix variables than some recent results. Finally, two simulation examples are given to illustrate the effectiveness of the proposed design method. © 2014 Wiley Periodicals, Inc. Complexity 21: 355–366, 2015     

Enlarged ferromagnetic hysteresis in InMnP:Be epilayers formed by thermal diffusion using MBE-grown Mn/InP:Be bilayers

The p-type InMnP:Be epilayers, which were prepared by thermal diffusion of Mn through in-situ deposition of Mn layer using molecular beam epitaxy (MBE) onto MBE-grown InP:Be epilayers and subsequent in-situ annealing at 300–350 °C, were investigated. InMnP:Be epilayers prepared by the above sequence clearly showed the Mn-related emission band at 1.1–1.2 eV, which indicates the effective incorporation of Mn²⁺ ions into the host layer InP:Be. The samples demonstrated very large ferromagnetic hysteresis loops with enhanced coercivity, and the ferromagnetic-to-paramagnetic transition of the samples was observed to occur at ∼85 K. These results suggest that InP-based ferromagnetic semiconductor layers having enhanced ferromagnetism can be effectively formed by the above-mentioned sequential in-situ processes.