Light-Driven Crawling of Molecular Crystals by Phase-Dependent Transient Elastic Lattice Deformation

The light-driven crawling of a molecular crystal that can form three phases, (α, β, and γ) is presented. Laser irradiation of the molecular crystal can generate phase-dependent transient elastic lattice deformation. The resulting elastic lattice deformation that follows scanning irradiation of a laser can actuate the different phases of molecular crystal to move with different velocity and direction. Because the γ phase has a large Young's modulus (ca. 26 GPa), a force of 0.1 μN can be generated under one laser spot. The generated force is sufficient to actuate the γ-formed molecular crystals in a wide dimensional range to move longitudinally at a velocity of about 60 μm min⁻¹, which is two orders of magnitude faster than the α and β phases.     

Probe-Free Direct Identification of Type I and Type II Photosensitized Oxidation Using Field-Induced Droplet Ionization Mass Spectrometry

While Type I and Type II photosensitizers are often carefully tailored to achieve their respective advantages in treating different cancers, the identifications of the Type I and II mechanisms as such, the key reaction intermediates, and the consequent oxidation products of the substrates have never been easy. Using our unique home-built field-induced droplet ionization mass spectrometry (FIDI-MS) method that selectively samples molecules at the air–water interface, here we show the facile determination of both Type I and II mechanisms of a poster-child photosensitizer, temoporfin, without the addition of any probes. The unstable doublet radical resulting from the hydrogen abstraction by the triplet temoporfin through the Type I mechanism is captured, manifesting the in situ advantage of FIDI-MS. We anticipate that the method developed in this study can be widely utilized in the future designs of novel photosensitizers and the screening of their photosensitization mechanisms.     

Fe-Co Alloyed Nanoparticles Catalyzing Efficient Hydrogenation of Cinnamaldehyde to Cinnamyl Alcohol in Water

Selective hydrogenation of C=O against the conjugated C=C in cinnamaldehyde (CAL) is indispensable to produce cinnamyl alcohol (COL). Nonetheless, it is challenged by the low selectivity and the need to use organic solvents. Herein, for the first time, we report the use of Fe-Co alloy nanoparticles (NPs) on N-doped carbon support as a selective hydrogenation catalyst to efficiently convert CAL to COL. The resultant catalyst with the optimized Fe/Co ratio of 0.5 can achieve an exceptional COL selectivity of 91.7 % at a CAL conversion of 95.1 % in pure water medium under mild reaction conditions, ranking it the best performed catalyst reported to date. The experimental results confirm that the COL selectivity and CAL conversion efficiency are, respectively promoted by the presence of Fe and Co, while the synergism of the alloyed Fe-Co is the key to concurrently achieve high COL selectivity and CAL conversion efficiency.     

Polyhydroxy Fullerene-loaded ZIF-8 Nanocomposites for Better Photodynamic Therapy

Photodynamic therapy (PDT) has been received broad attentions as a cancer treatment, and fullerenes are potential photosensitizer owing to their unique electronic structures. However, fullerenes show insolubility in water for the special structure, which will induce aggregation to hinder the production of reactive oxygen species (ROS). Furthermore, the size of fullerenes is not conducive to reach the tumors through the enhanced permeability and retention (EPR) effect. Herein, a polyhydroxy fullerene-loaded metal-organic framework is designed and prepared to address the mentioned problems encountering with fullerenes as photosensitizers. The nanocomposite PHF@ZIF-8, which is synthesized by a simple one-pot method, displays great biocompatibility and outstanding photodynamic performance under the 448 nm laser irradiation. This work provides strong evidence for PHF@ZIF-8 as a promising photosensitizer candidate.     

部分还原二氧化钛的NMR和EPR研究

Partially reduced TiO₂ nanomaterials have attracted significant interest because of their visible-light activity for catalysis and photodegradation. Herein, we prepared a partially reduced anatase TiO₂ (Re-A-TiO₂) nanoparticle material using a fast combustion method, demonstrating good activity toward decomposing methyl orange under visible light irradiation. The surface structure of the prepared material, after being surface-selectively ¹⁷O-labeled with H₂¹⁷O (¹⁷O-enriched water), was studied via ¹⁷O and ¹H solid-state magic angle spinning nuclear magnetic resonance (MAS NMR) spectroscopy and electron paramagnetic resonance (EPR) spectroscopy, and the obtained results were compared to those of non-reduced anatase TiO₂ (A-TiO₂). The EPR results showed that the concentrations of paramagnetic species (i.e., oxygen vacancies (OV) and Ti³⁺) in Re-A-TiO₂ were much higher than that in A-TiO₂, while the former was associated with a higher OV/Ti³⁺ ratio. The intensities of the EPR signals were significantly affected by the adsorbed water, and this phenomenon was explored in combination with ¹H NMR spectroscopy. The ¹H species on Re-A-TiO₂ appeared at larger chemical shifts, denoting the increased acidity of the sample, and these ¹H species on Re-A-TiO₂ were more difficult to remove than those on A-TiO₂. On the other hand, different features were observed for the signals arising from the two-coordinated oxygen atoms (μ₂-O) in ¹⁷O NMR, suggesting a typical anatase TiO₂(101) surface on A-TiO₂, but a more complex surface environment for Re-A-TiO₂. Furthermore, a larger amount of hydroxyl groups (OH) were observed on Re-A-TiO₂ compared to that on A-TiO₂, indicating a larger proportion of exposed (001) facets on Re-A-TiO₂. However, the μ₂-O signals broadened and became similar when the drying temperature was increased to 100 ℃, indicating a non-faceted anatase TiO₂ surface in such conditions. Based on the EPR and NMR results, a significant fraction of the OH species is believed to be formed from the reaction of the paramagnetic centers and adsorbed water molecules. The ¹H→¹⁷O cross polarization (CP) MAS and two-dimensional heteronuclear correlation (2D HETCOR) NMR spectra were used to verify the spatial proximity of the hydrogen and oxygen species, confirming the spectral assignments of a strongly adsorbed water and one type of surface OH species. In particular, the ¹H NMR signals at approximately 11 ppm were ascribed to the hydrogen species in the intramolecular hydrogen bond. In summary, this study investigated the paramagnetic species and surface structure of anatase TiO₂ materials by combining EPR along with ¹H and ¹⁷O solid-state NMR spectroscopy. The differences in the surface structures of Re-A-TiO₂ and A-TiO₂ should be closely related to their different properties toward the photodegradation of methyl orange.     

基于FeWOx/SiO2载氧体的甲烷化学链部分氧化反应

甲烷具有价格低廉且储量丰富的优点,因此将甲烷转化为合成气(一种H2:CO为2的混合物),从而进一步合成有价值的化学品和液体燃料引起了人们的极大关注.化学链甲烷部分氧化(CLPOM)技术能避免甲烷与空气直接接触而引起爆炸的危险,可以降低后续对合成气与氮气分离操作所带来的费用,因此日益受到关注.CLOPM过程主要分为两步:第一步,CH4被载氧体所携带的氧部分氧化,载氧体被还原;第二步,利用氧化剂(例如空气)将被还原的载氧体再氧化恢复.因此,载氧体在CLOPM过程中起到至关重要的作用.载氧体的选择主要存在两个问题:(1)甲烷被活化所产生含碳产物的能力与晶格氧的给氧能力不匹配所带来的严重碳沉积;(2)金属离子间扩散速率不匹配而造成载氧体在氧化还原过程中结构的不可逆变化.基于上述两个问题,本文设计了FeWOx/SiO2载氧体用于CLPOM.与未改性的WO3/SiO2载氧体相比,甲烷的转化率和合成气的收率都有显著提高.FeWOx/SiO2在900℃、1 atm反应条件下表现出62%的甲烷转化率、93%的CO气相选择性、94%的H2选择性和2.4的H2/CO比值,同时在50个循环中表现出优异的催化活性和稳定性.本工作利用CH4脉冲反应研究了FeWOx/SiO2的甲烷表面反应过程;采用CH4-TPR和H2-TPR相结合探究了甲烷活化速率与晶格氧扩散速率之间的关系;通过XPS和XRD对FeWOx/SiO2在氧化还原过程中的结构稳定性进行了探讨.综合上述实验结果,对FeWOx/SiO2应用于CLPOM的反应机理进行了阐述.H2-TPR结果表明,在FeWOx/SiO2中,相较于Fe2O3/SiO2,Fe-O的活性受到抑制,使其更倾向于与甲烷发生部分氧化反应;相较于WO3/SiO2,W-O的活性得到明显提升,因此更多的晶格氧可以参与到部分氧化反应中来氧化积碳,从而使合成气收率大幅度提升.从CH4-TPR结果可以看出,对于FeWOx/SiO2,CO与H2的生成温度最接近,意味着晶格氧的传输速率较快并且能够与甲烷活化产生含碳中间物种的速率相匹配,将其及时氧化生成CO,避免由于积碳造成的催化剂失活.结合XPS和XRD结果可以得出,在甲烷还原过程中,FeWOx经历一步还原形成Fe-W合金,由于其间存在强相互作用,因而抑制了还原过程中催化剂相分离现象的发生.同时,根据铁钨离子在空气条件下扩散速率的公式计算可以得出,其相近的离子氧化速率也保证了在氧化过程中催化剂结构的稳定性.本工作为进一步构建用于甲烷化学链部分氧化制合成气的复合金属氧化物载氧体提供了研究思路.     

Strong and Superhydrophobic Wood with Aligned Cellulose Nanofibers as a Waterproof Structural Material†

Lightweight structural materials are important for the energy efficiency of applications, particularly those in the building sector. Here, inspired by nature, we developed a strong, superhydrophobic, yet lightweight material by simple in situ growth of nano‐SiO₂ and subsequent densification of the wood substrate. In situ generation of SiO₂ nanoparticles both inside the wood channels and on the wood surfaces gives the material superhydrophobicity, with static and dynamic contact angles of 159.4^o and 3^o, respectively. Densification of the wood to remove most of the spaces among the lumen and cell walls results in a laminated, dense structure, with aligned cellulose nanofibers, which in turn contributes to a high mechanical strength up to 384.2 MPa (7‐times higher than natural wood). Such treatment enables the strong and superhydrophobic wood (SH‐Wood) to be stable and have excellent water, acid, and alkaline resistance. The high mechanical strength of SH‐Wood combined with its excellent structural stability in harsh environments, as well its low density, positions the strong and superhydrophobic wood as a promising candidate for strong, lightweight, and durable structural materials that could potentially replace steel.     

C−C Bond Formation in Syngas Conversion over Zinc Sites Grafted on ZSM‐5 Zeolite

Despite significant progress achieved in Fischer–Tropsch synthesis (FTS) technology, control of product selectivity remains a challenge in syngas conversion. Herein, we demonstrate that Zn²⁺‐ion exchanged ZSM‐5 zeolite steers syngas conversion selectively to ethane with its selectivity reaching as high as 86 % among hydrocarbons (excluding CO₂) at 20 % CO conversion. NMR spectroscopy, X‐ray absorption spectroscopy, and X‐ray fluorescence indicate that this is likely attributed to the highly dispersed Zn sites grafted on ZSM‐5. Quasi‐in‐situ solid‐state NMR, obtained by quenching the reaction in liquid N₂, detects C₂ species such as acetyl (‐COCH₃) bonding with an oxygen, ethyl (‐CH₂CH₃) bonding with a Zn site, and epoxyethane molecules adsorbing on a Zn site and a Brønsted acid site of the catalyst, respectively. These species could provide insight into C?C bond formation during ethane formation. Interestingly, this selective reaction pathway toward ethane appears to be general because a series of other Zn²⁺‐ion exchanged aluminosilicate zeolites with different topologies (for example, SSZ‐13, MCM‐22, and ZSM‐12) all give ethane predominantly. By contrast, a physical mixture of ZnO‐ZSM‐5 favors formation of hydrocarbons beyond C₃₊. These results provide an important guide for tuning the product selectivity in syngas conversion.     

Host–Guest Complexation of Amphiphilic Molecules at the Air–Water Interface Prevents Oxidation by Hydroxyl Radicals and Singlet Oxygen

The oxidation of antioxidants by oxidizers imposes great challenges to both living organisms and the food industry. Here we show that the host–guest complexation of the carefully designed, positively charged, amphiphilic guanidinocalix[5]arene pentadodecyl ether (GC5A‐12C) and negatively charged oleic acid (OA), a well‐known cell membrane antioxidant, prevents the oxidation of the complex monolayers at the air–water interface from two potent oxidizers hydroxyl radicals (OH) and singlet delta oxygen (SDO). OH is generated from the gas phase and attacks from the top of the monolayer, while SDO is generated inside the monolayer and attacks amphiphiles from a lateral direction. Field‐induced droplet ionization mass spectrometry results have demonstrated that the host–guest complexation achieves steric shielding and prevents both types of oxidation as a result of the tight and “sleeved in” physical arrangement, rather than the chemical reactivity, of the complexes.