Atomic oxygen erosion resistance of polyimide/ZrO2 hybrid films

A series of polyimide/zirconia (PI/ZrO₂) hybrid films were synthesized based on zirconium n-butoxide, pyromellitic acid dianhydride (PMDA) and 4,4′-oxydianiline (ODA) by a sol-gel process. The atomic oxygen (AO) exposure tests were carried out using a ground-based atomic oxygen effects simulation facility. The effects of ZrO₂ content on the morphology and structure evolvement of PI/ZrO₂ hybrid films were investigated using field emission scanning electron microscopy (FE-SEM) and X-ray photoelectron spectrometer (XPS), respectively. The results indicated that a zirconia-rich layer was formed on the polyimide film sourcing from the zirconium n-butoxide after AO exposure, which decreased the erosion rate and obviously improved the AO resistance of polyimide films.     

Superior electrochemical performance of carbon cloth electrode-based supercapacitors through surface activation and nitrogen doping

A simple and low-cost strategy is developed to fabricate three-dimensional (3D) nitrogen-doped carbon cloth electrode through surface activation and nitrogen-doping process. The process can exfoliate the smooth surfaces of micro carbon fibers into nanostructures together with the doping of nitrogen-containing species. The as-fabricated carbon cloth electrode shows excellent areal capacitances of 882.36 and 706.68 mF cm^?2 at the current density of 1 and 60 mA cm^?2, respectively, exhibiting good rate performance. It also exhibits outstanding cycling stability with 98.7 % retention of its initial capacitance after 30,000 continuous charging/discharging tests. When the electrodes were assembled and tested as a symmetric supercapacitor, it also demonstrates superior electrochemical performance. It is believed that the 3D carbon structures with enlarged surface area, improved conductivity and electrode/electrolyte wettability, and enhanced pseudocapacitance by doping of nitrogen lead to the vast improvement of electrochemical performance.     

X光能点、放大倍率及针孔尺寸对空间分辨的影响

X光针孔成像是惯性约束聚变(ICF)研究中重要的诊断方法,对其点扩散函数的计算可用于图像重建和系统空间分辨的判断。对菲涅耳衍射公式进行了化简,分析了X光能点、针孔尺寸及放大倍率对针孔点扩散函数的影响。实验在保证成像能获得足够高信噪比的条件下,通过模拟获得在最佳空间分辨时所要的针孔大小、放大倍率和X光能点等参数。在流体力学不稳定性的静态样品定标实验中,通过模拟获得了针孔的调制传递函数(MTF),结合实验测量的结果反推获得分幅相机本身的MTF值。同时采用测刀边函数的方法获得了分幅相机本身的刀边函数,进而得到相机在各空间频率下的MTF值。两种方法得到的分幅相机MTF值一致,验证了通过菲涅耳衍射模拟X光针孔成像的可行性。     

酞菁锌掺杂二氧化硅凝胶基质的光谱学特征

利用溶胶凝胶技术将四磺化酞菁锌 (ZnPcS4)成功地引入到了二氧化硅凝胶基质中 ,制备了均匀掺杂的有机 /无机复合干凝胶。研究ZnPcS4分子在溶胶凝胶过程中紫外可见吸收光谱的变化规律以探索其在复合体系中的存在状态。实验表明 ,在溶胶阶段 ,随着时间的延长 ,紫外可见吸收光谱中单体的吸收峰强度增大 ,说明凝胶中酞菁单体的浓度增大 ;而形成凝胶后 ,随着时间的延长 ,紫外可见吸收光谱中单体的吸收峰强度减小 ,二聚体的吸收峰强度增大 ,说明由于体系结构和微化学环境的变化 ,酞菁分子趋向于聚合。     

基于Michelson干涉仪的高灵敏度光纤高温探针传感器

提出了一种简单的高灵敏度的光纤高温探针传感器, 该传感器由一小段多模光纤和一端镀有银膜的单模光纤熔接而成. 由于单模光纤和多模光纤的纤芯直径不同, 当光波从多模光纤传输至多模光纤和单模光纤的熔接端面时, 一部分纤芯光耦合进包层, 因为单模光纤纤芯的折射率和包层的折射率不同, 不同模式的光经过银膜反射后在多模光纤内重新耦合进单模光纤, 最终形成干涉.随着外界温度的升高, 干涉谱峰值会向长波方向漂移. 实验结果证明这种传感器在470 ℃–600 ℃范围内具有很好的稳定性, 线性度达99.7%, 灵敏度为120 pm/℃, 可作为远距离反射型探针温度传感器, 在石油探测和油气田开发等领域有着广泛的应用前景. 关键词： 光纤传感 温度测量 Michelson干涉     

光声池中微弱光声信号检测

大气中的污染源气体含量很少, 用光声光谱对其进行监测得到的光声信号极其微弱. 本文首先分析微弱信号产生机理, 在分析Holmes Duffing方程的基础上, 提出了适合光声池微弱信号检测的变尺度差分方法. 该方法通过对信号进行尺度变换, 再做差分来检测微弱信号. 理论分析和实验表明, 变尺度差分方法能很好地抑制系统相空间的共模噪声, 而且能很好地凸显混沌状态临界值. 变尺度差分方法测出的信号相对误差都小于5%, 说明其可以用于较高频率、 相位和频率都未知的微弱光声信号幅值检测. 关键词： 光声光谱 微弱信号 幅值 Duffing     

Stable periodic solution of a discrete periodic Lotka-Volterra competition system

This paper discusses a discrete Lotka-Volterra competition system. We first obtain the persistence of the system. Assuming that the coefficients in the system are periodic, we obtain the existence of a periodic solution. Moreover, under some additional conditions, this periodic solution is globally stable. Our results not only reduce to those for the scalar equation when there is no coupling but also improve and complement some in the literature.     

(2+1)维光折变波导阵列的制作

对四个点光源进行光学傅里叶变换,在自散焦光折变晶体中成功地制作了6μm×6μm间隔的并行(2+1)维阵列波导300余条,并证明了阵列波导实质上是二维体相位栅.实验研究了点光源间距、点光源尺寸及写入时间对阵列波导制作的影响,并分析了在自散焦光生伏打光折变介质中形成阵列波导的原理.     

流动注射荧光分光光度法测定DNA的研究

本文研究了中药有效成分盐酸小蘖碱与DNA的荧光光谱性质 ,并应用流动注射技术测定DNA的浓度 ,该法线性范围 0～ 12 μg·mL-1 ,检出限为 ( 3σ) 7 3ng·mL-1 ,相对标准偏差≤ 3 1% ,应用于合成样品的测定 ,取得满意的结果     

Magnetoresistance and magnetic properties of Fe3O4 nanoparticle compacts

In this paper,we report on the magnetic properties of Fe3O4 nanoparticles with different grain sizes under different pressures.In all the samples,the saturated magnetization Ms shows a linear decrease with increasing pressure.The thickness of the magnetic dead layer on the nanoparticle surface nuder different pressures was roughly estimated,which also increases with increasing pressure.The transport measurements of the nanoparticle Fe3O4 compacts show that the low-field magnetoresistance (MR) value is insensitive to the grain size in a wide temperature range;however,the high-field MR value is dependent on grain size,especially at low temperatures.These experimental results can be attributed to the different surface states of the nanoparticles.