Synthesis,Characterization, and Antibacterial Activity of RE(III) Complexes with L-Isoleucine and 1,10-Phenanthroline

Six new ternary rare-earth (La, Eu, Sm, Nd, Y, Yb) complexes with L-isoleucine and 1,10-phenanthroline have been synthesized. Their compositions were characterized as RE(Ile)₃PhenCl₃ · 4H₂O (RE = La, Eu, Sm, Nd, Y, Yb; Ile = L-isoleucine; phen = 1,10-phenanthroline) by elemental analysis, EDTA titration, molar conductance measurement, UV spectra, FT-IR spectra, and TG-DTA. The average diameters of growth inhibition area and the minimal inhibitory concentration (MIC) of the complexes were studied by disc diffusion method and dilution method in nutrient broth. The results showed that the ternary rare-earth complexes strongly exhibited the antibacterial activity against Escherichia coli and Staphylococcus aureus and that their antibacterial effects were better than those of rare-earth chlorides, L-isoleucine, and 1,10-phenanthroline.     

基于连续量子级联激光器的1103.4cm–1处NH3混叠吸收光谱特性研究

由于NH3在大气气溶胶化学中具有重要作用,所以快速和精确反演NH3浓度对环境问题非常重要.本文以9.05μm的室温连续量子级联激光器(quantum cascade laser,QCL)作为光源,采用波长扫描直接吸收可调谐二极管激光吸收光谱(tunable diode laser absorption spectroscopy,TDLAS)技术,研究了QCL在1103.4 cm–1的光谱特性,获得了激光器控制的温度电流与波长的关系.设计了QCL二级温控的低压实验平台,测量氨气在1103.4 cm–1处的6条混叠吸收线,在降低压强的情况下谱线展宽变小,使混叠光谱分离,由此计算各条吸收线的线强,进一步对测量不确定度进行分析.针对混叠严重的光谱提出了低压分离单光谱精确反演气体浓度的方法,并进行了实验验证.通过与HITRAN数据库进行结果对比,得出氨气在1103.4 cm–1的实验测量线强值与数据库偏差为2.71%-4.71%,实验测量线强值的不确定度在2.42%-8.92%,极低压条件下反演浓度与实际值的偏差在1%-3%.     

Dissipative quantum phase transition in a biased Tavis-Cummings model

We study the dissipative quantum phase transition(QPT)in a biased Tavis–Cummings model consisting of an ensemble of two-level systems(TLSs)interacting with a cavity mode,where the TLSs are pumped by a drive field.In our proposal,we use a dissipative TLS ensemble and an active cavity with effective gain.In the weak drive-field limit,the QPT can occur under the combined actions of the loss and gain of the system.Owing to the active cavity,the QPT behavior can be much differentiated even for a finite strength of the drive field on the TLS ensemble.Also,we propose to implement our scheme based on the dissipative nitrogen-vacancy(NV)centers coupled to an active optical cavity made from the gainmedium-doped silica.Furthermore,we show that the QPT can be measured by probing the transmission spectrum of the cavity embedding the ensemble of the NV centers.     

喷流冷却复合陶瓷薄片激光器的热特性仿真分析及实验研究

为分析喷流冷却复合陶瓷薄片激光器的热特性,设计用于冷却复合陶瓷薄片的喷流冷却系统.利用湍流换热理论和计算流体动力学仿真方法建立喷流冷却复合陶瓷薄片激光器的流固耦合热仿真模型,定义评价其冷却能力和冷却均匀性的定量参数.根据该仿真模型得到喷流冷却系统的最优设计参数,并进行实验验证.使用163孔喷板,流量为0.2kg/s,入口温度为20℃,在1200 W泵浦时获得359 W激光输出功率,并测得复合陶瓷薄片上表面的最高温度为92℃.激光输出功率与复合陶瓷薄片上表面温度均与泵浦功率呈近似正线性关系,且温度的实验值与仿真值相符度较高.     

Ring Airy-Like Beams along Predesigned Parabolic Trajectories

By phase-modulating ring Airy Gaussian beams, ring Airy-like beams propagating along predesigned parabolic trajectories are presented which combine the properties of accelerating beams and abruptly autofocusing beams analytically and numerically for the first time. The enhancement of the quadratic term ratio α shortens the autofocus distance and increases the slope of the beams after autofocusing. Interestingly, the main lobe tends to break into pieces as α increases and the possible reasons have been discussed. Furthermore, the distribution factor β and the radius of the primary r₀ can prominently affect the autofocus distance and the intensity at the focal point but do not change the slope of the beams after the autofocusing. In addition, the self-healing properties are validated to be retainable while RAiG beams via predesigned parabolic trajectories with various α.     

碳纳米纤维负载Co3S4复合材料的合成及其在染料敏化太阳电池对电极的应用

采用水热法合成四硫化三钴（Co₃S₄）催化材料,并利用球磨和喷涂技术将其制备成对电极,结合新型无碘电解液Co²⁺/Co³⁺用于染料敏化太阳电池（dye-sensitized solar cells,简称DSCs）来研究其光电性能。测试结果显示,基于Co₃S₄对电极,DSCs的能量转化效率（power conversion efficiency,简称PCE）只有6.06%,远远低于Pt对电极（8.05%）。为了提高Co₃S₄的催化能力,采用静电纺丝技术制备碳纳米纤维（electrospun carbon nanofibers,简称ECs）,结合水热法制备出不同负载量的碳纳米纤维负载四硫化三钴（Co₃S₄/ECs）复合催化材料用于对电极,结果表明,Co₃S₄/ECs的PCE最高可达（8.22±0.08）%,优于Pt对电极。     

Sensitivity of depolarized lidar signals to cloud and aerosol particle properties

Measurements from depolarized lidars provide a promising method to retrieve both cloud and aerosol properties and a versatile complement to passive satellite-based sensors. For lidar observations of clouds and aerosols, multiple scattering plays an important role in the scattering process. Monte Carlo simulations are carried out to investigate the sensitivity of lidar backscattering depolarization to cloud and aerosol properties. Lidar parameters are chosen to be similar to those of the upcoming space-based CALIPSO lidar. Cases are considered that consist of a single cloud or aerosol layer, as well as a case in which cirrus clouds overlay different types of aerosols. It is demonstrated that besides thermodynamic cloud phase, the depolarized lidar signal may provide additional information on ice or aerosol particle shapes. However, our results show little sensitivity to ice or aerosol particle sizes. Additionally, for the case of multiple but overlapping layers involving both clouds and aerosols, the depolarized lidar contains information that can help identify the particle properties of each layer.     

真空紫外光激发下掺Pr3+铝酸盐的自陷激子对Pr3+发光的影响

研究了SrAl12 O19:Pr3+和Y3Al5O12(YAG):Pr3+在20K,77K和300K的真空紫外(VUV)光谱,二者除了表现出Pr3+特有的发射性质外,还产生了一种特殊的发射现象,即自陷激子(STE)发射,并且其随着稀土离子浓度和温度的降低而增强.还着重讨论了自陷激子对Pr3+发光的影响.     

3D building reconstruction from aerial CCD image and sparse laser sample data

An approach for 3D building reconstruction automatically based on aerial CCD image and sparse laser scanning sample points is presented in this paper. The geometry shape of a building is shown very clearly in the aerial high-resolution CCD image, so we use Laplacian sharpening operator and threshold segmentation to extract the edges of CCD image first, and then pixel connectivity is used to extract the linear features in the CCD image. Bi-direction projection histogram and line matching are proposed to extract the contours of buildings. The height of the building is determined from sparse laser sample points which are within the contour of the buildings extracted from CCD image; therefore the 3D information of each building is reconstructed. We reconstruct 3D buildings correctly by this approach using real aerial CCD and sparse laser rangefinder data.     

紫外可调谐辐射的波长自动跟踪研究

脉冲染料激光器的可见光波段辐射通过共线倍频和非共线混频实现紫外波段的连续可调谐输出.本文报道了一种闭环跟踪方法;在调谐起始波长处,将取样光束在垂直相位匹配方向分割成等光强的两部分,然后在波长调谐时比较和平衡这两部分光强.对该方法在理论上作了分析并在实验中得到成功的验证.获得的自动跟踪效率大于90%.