土壤盐渍化的研究进展

根据近年来国内外土壤学者在土壤盐渍化的研究成果，从土壤盐渍化的基本理论，改良方法以及预测预报方面的研究，综述了土壤盐渍化的研究现状，通过分析土壤盐渍化研究多方面存在的问题，对其发展趋势和今后研究重点进行了展望，望能为进一步的深入研究工作提供帮助．     

Necessary conditions and duality for inexact nonlinear semi-infinite programming problems

First order necessary conditions and duality results for general inexact nonlinear programming problems formulated in nonreflexive spaces are obtained. The Dubovitskii–Milyutin approach is the main tool used. Particular cases of linear and convex programs are also analyzed and some comments about a comparison of the obtained results with those existing in the literature are given.     

A globally convergent algorithm for the Euclidean multiplicity location problem

The Euclidean single facility location problem (ESFL) and the Euclidean multiplicity location problem (EMFL) are two special nonsmooth convex programming problems which have attracted a large literature. For the ESFL problem, there are algorithms which converge both globally and quadratically. For the EMFL problem, there are some quadratically convergent algorithms, but for global convergence, they all need nontrivial assumptions on the problem.In this paper, we present an algorithm for EMFL. With no assumption on the problem, it is proved that from any initial point, this algorithm generates a sequence of points which converges to the closed convex set of optimal solutions of EMFL.This research is supported in part by the Air Force Office of Scientific Research Grant AFOSR-87-0127, the National Science Foundation Grant DCR-8420935 and University of Minnesota Graduate School Doctoral Dissertation Fellowship awarded to G.L. Xue.     

A global optimization design for quasi-optics power combiner of 3mm wave solid-state sources

This paper describes a global optimization design for quasi-optics power combiner of solid-state millimeter-wave sources. The operating frequency is about 100 GHz and the oscillating sources are GaAs Gunn diodes. The source-array plane is a matrix consisting of NxN (N=3,5, ..., 2k+1, where k is positive integer) diodes. The radio frequency power of the combiner is from threefold to sevenfold larger than the sum total of the single diodes power. The global optimums of the array and the location in the cuvity of the suorce-array plane will be given by a global optimizition method.     

Aggregation Properties of an Amphiphilic Methanofullerene Derivative in THFH_2O Solvent Mixtures

Water-soluble fullerenes not only have a number of important applications in biological chemistry1, but also form ordered aggregate structures that can be utilized in materials science2. There are reports that some water-soluble fullerene derivatives can form ordered structures in water, such as vesicle, nanorod and nanoparticle2-5. However, relatively few reports on the aggregation process have been reported. Knowledge of factors that affect the cluster formation in solution is of consider…     

利用KTP晶体实现1.08μmNd：YAP激光器锁模

本文描述了利用ＫＴＰ晶体和腔的基波输出镜构成非线性镜实现１．０８μｍＮｄ：ＹＡＰ激光器的被动锁模。实验表明，这种新的锁模技术比用染料作可饱和吸收体的被动锁模技术有很多突出的优点，具有很大的发展潜力。实验测得锁模时基波１．０８μｍ输出２．４ｍＪ，二次谐波０．５４μｍ输出０．５ｍＪ（同样条件下的静态输出为２．５ｍＪ），基波脉冲的平均脉宽为４０ｐｓ。     

Microscopically structural studies of lithium niobate powders

On the basis of the crystallographic characteristics of lithium niobate (LN) crystals, Law of Bravais and Pauling's third rule (i.e. Polyhedral Sharing Rule) are employed with the aim to find the relationship between the crystal structure and morphological faces of LN powders. In order to validate our analytical results, we have successfully synthesized LN powders and measured the corresponding X-ray powder diffraction. Our results show that the structural analysis is consistent with the experimental data and is helpful and effective for us to control the single-crystal growth and to design superstructures at the specific plane, starting from the viewpoint of the microscopic behaviors of constituent chemical bonds and polyhedra in the crystallographic frame.     

Syntheses,crystal structures and blue emission of three zinc(II) coordination polymers with a 4,4′‐dicarboxybiphenyl sulfone ligand

Three novel zinc complexes [Zn(dbsf)(H₂O)₂] ( 1 ), [Zn(dbsf)(2,2′‐bpy)(H₂O)]·(i‐C₃H₇OH) ( 2 ) and [Zn(dbsf)(DMF)] ( 3 ) (H₂dbsf = 4,4′‐dicarboxybiphenyl sulfone, 2,2′‐bpy = 2,2′‐bipyridine, i‐C₃H₇OH = iso‐propanol, DMF = N,N‐dimethylformamide) were first obtained and characterized by single crystal X‐ray crystallography. Although the results show that all the complexes 1–3 have one‐dimensional chains formed via coordination bonds, unique three‐dimensional supramolecular structures are formed due to different coordination modes and configuration of the dbsf^2? ligand, hydrogen bonds and π–π interactions. Iso‐propanol molecules are in open channels of 2 while larger empty channels are formed in 3 . As compared with emission band of the free H₂dbsf ligand, emission peaks of the complexes 1–3 are red‐shifted, and they show blue emission, which originates from enlarging conjugation upon coordination. Copyright © 2006 John Wiley & Sons, Ltd.     

Synthesis of grafted poly(p‐phenyleneethynylene) with energy donor–acceptor architecture via atom transfer radical polymerization: Towards nonaggregating and hole‐facilitating light‐emitting material

In this contribution, we demonstrate a new effective methodology for constructing highly efficient and durable poly(p‐phenyleneethynylene) (PPE) containing emissive material with nonaggregating and hole‐facilitating properties through the introduction of hole‐transporting blocks into the PPE system as the grafting coils as well as building the energy donor–acceptor architecture between the grafting coils and the PPE backbone. Poly(2‐(carbazol‐9‐yl)ethyl methacrylate) (PCzEMA), herein, is chosen as the hole‐transporting blocks, and incorporated into the PPE system as the grafting coils via atom transfer radical polymerization. The chemical structure of the resultant copolymer, PPE‐g‐PCzEMA, was characterized by NMR and gel permeation chromatography, showing that the desirable copolymer was obtained with the narrow polydispersity. The increased thermal stability of PPE‐g‐PCzEMA was confirmed by thermogravimetric analysis and differential scanning calorimetry along with its macroinitiator. The optoelectronic properties of this copolymer were studied in detail by ultraviolet‐visible absorption, photoluminescence emission and excitation spectra, and cyclic voltammogram (CV). The results indicate that PPE‐g‐PCzEMA exhibits the solid‐state luminescent property dominated by individual lumophores, and also the energy transfer process from the PCzEMA blocks to the PPE backbone with a relatively higher energy transfer efficiency in the solid‐state compared to that of the solution state. Additionally, the hole‐injection property is greatly facilitated due to the presence of PCzEMA, as confirmed by CV profiles. All these data indicate that PPE‐g‐PCzEMA is a good candidate for use in optoelectronic devices. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3776–3787, 2007