横向位移双曝光散斑图维纳谱的信息分布

讨论了横向位移双曝光散斑图维纳谱的信息分布，并由此导出杨氏纹图的一般表达式。讨论了条纹可见度与应变，面内转动，照明光束直径与条纹图图空间坐标的关系，指出了在条纹可见度影响下最大可见条纹数目。还讨论了散斑衬比与衍射晕的关系。     

All-fibre optical system for exciting and detecting the vibration of silicon microresonator sensors

An all-fibre optical system for optical interrogation and detection of the vibrations of a silicon microresonator is reported. Metal-coated silicon microresonators are excited by intensity modulated laser light delivered through an optical fibre, while the vibration of the resonators is detected by an optical fibre interferometer. Measurements have shown that an average optical power of 10 μW is sufficient to maintain the flexural vibration of the resonator. When the resonator is used as a pressure sensor, its resonant frequency changes from 62 kHz to 130 kHz as the pressure varies from -0°6 bar to 1 bar (gauge). A silicon resonator with 700 nm aluminium coating functions as a temperature sensor, showing a frequency shift from 262 kHz to 251 kHz when the temperature changes from 25 °C to 80 °C.     

带耗散的一阶非线性偏微分方程组的Cauchy问题

本文采用整体迭代法证明了带小初值的一阶非线性耗散偏微分方程组的Cauchy问题的整体经典解的存在性及指数衰减性质。     

人力资源的预测方法

人力资源规划是必不可少的管理环节．科学的人力资源规划，必须建立在对人员供、需的准确预测的基础上．本文讨论人力资源预测的问题和转移矩阵等方法的使用．     

Trefftz,collocation, and other boundary methods—A comparison

In this article we survey the Trefftz method (TM), the collocation method (CM), and the collocation Trefftz method (CTM). We also review the coupling techniques for the interzonal conditions, which include the indirect Trefftz method, the original Trefftz method, the penalty plus hybrid Trefftz method, and the direct Trefftz method. Other boundary methods are also briefly described. Key issues in these algorithms, including the error analysis, are addressed. New numerical results are reported. Comparisons among TMs and other numerical methods are made. It is concluded that the CTM is the simplest algorithm and provides the most accurate solution with the best numerical stability. © 2006 Wiley Periodicals, Inc. Numer Methods Partial Differential Eq, 2007     

A symmetry-adapted force-constant lattice-dynamical model for single-walled carbon nanotubes

We develop a lattice-dynamical model based on the screw symmetry of single-walled carbon nanotubes that allows for reducing the size of the dynamical matrix to six, for all tube chiralities. The model uses force constants derived from fitting to the phonon dispersion of 2D graphite. We present the calculation procedure in a clear and transparent way, making the model easier to follow. We calculate the phonon dispersions of a number of nanotubes of different chiralities. The splitting of two highest Raman active modes and the radial breathing mode frequency are studied by changing the tube diameter and chirality.     

Four-wave mixing based 10-Gb/s tunable wavelength conversion in dispersion-flattened microstructure fibers

All-optical wavelength conversion of 10-Gb/s signal based on four-wave mixing is experimentally demonstrated in a 30-m-long dispersion-flattened microstructure fiber with small positive dispersion. For an average pump power of 26 dBm, the conversion efficiency was around -19.5 dB with the fluctuation less than ±1.4 dB, covering a conversion bandwidth of 20 nm. The eye diagram of the converted signal shows good eye opening.     

A floating-point genetic algorithm for solving the unit commitment problem

This paper proposes a floating-point genetic algorithm (FPGA) to solve the unit commitment problem (UCP). Based on the characteristics of typical load demand, a floating-point chromosome representation and an encoding–decoding scheme are designed to reduce the complexities in handling the minimum up/down time limits. Strategic parameters of the FPGA are characterized in detail, i.e., the evaluation function and its constraints, population size, operation styles of selection, crossover operation and probability, mutation operation and probability. A dynamic combination scheme of genetic operators is formulated to explore and exploit the FPGA in the non-convex solution space and multimodal objective function. Experiment results show that the FPGA is a more effective technique among the various styles of genetic algorithms, which can be applied to the practical scheduling tasks in utility power systems.     

基于BP神经网络的企业未来获利能力智能综合评价

分析了相关分析——多指标综合评价法在确定企业未来获利能力方面的优点和不足 ;并在其基础上提出了基于 BP神经网络的多指标综合评价法 ;仿真试验证明了基于 BP神经网络的多指标综合评价法的有效性     

Synthesis,characterization, and micellization of an epoxy‐based amphiphilic diblock copolymer of ϵ‐caprolactone and glycidyl methacrylate by enzymatic ring‐opening polymerization and atom transfer radical polymerization

Amphiphilic diblock copolymer polycaprolactone‐block‐poly(glycidyl methacrylate) (PCL‐b‐PGMA) was synthesized via enzymatic ring‐opening polymerization (eROP) and atom transfer radical polymerization (ATRP). Methanol first initiated eROP of ?‐caprolactone (?‐CL) in the presence of biocatalyst Novozyme‐435 under anhydrous conditions. The resulting monohydroxyl‐terminated polycaprolactone (PCL–OH) was subsequently converted to a bromine‐ended macroinitiator (PCL–Br) for ATRP by esterification with α‐bromopropionyl bromide. PCL‐b‐PGMA diblock copolymers were synthesized in a subsequent ATRP of glycidyl methacrylate (GMA). A kinetic analysis of ATRP indicated a living/controlled radical process. The macromolecular structures were characterized for PCL–OH, PCL–Br, and the block copolymers by means of nuclear magnetic resonance, gel permeation chromatography, and infrared spectroscopy. Differential scanning calorimetry and wide‐angle X‐ray diffraction analyses indicated that the copolymer composition (?‐CL/GMA) had a great influence on the thermal properties. The well‐defined, amphiphilic diblock copolymer PCL‐b‐PGMA self‐assembled into nanoscale micelles in aqueous solutions, as investigated by dynamic light scattering and transmission electron microscopy. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5037–5049, 2007