基于本征系数的大口径望远镜失调量解算

针对大口径望远镜光学系统内部空间限制的特点,为了实现失调量校正,提出了一种基于本征系数的失调量解算方法.该方法首先利用波前曲率传感器的原理,通过交替测量前后离焦面的方式采集光斑图.然后,利用无需分区探测的本征函数法进行波前重构,利用本征系数来表征系统波像差,并依据失调量建立灵敏度矩阵模型.最后,根据失调状态与理想状态的本征系数即可求解出失调量.与其他技术途径相比,该方法具有无需添加光学元件、无需分区探测、运算简单的特点.主镜直径为1.8m的望远镜实验结果表明,当次镜偏心距离范围为--0.9～0.9 mm、倾斜角范围为--0.2°～0.2°时,利用本征系数灵敏度矩阵法得到的计算值的误差均小于10％,对大口径望远镜中的应用具有一定的意义.     

大口径氘化磷酸二氢钾晶体离线亚纳秒激光预处理技术

大口径氘化磷酸二氢钾(DKDP)晶体抗激光损伤性能偏低严重地制约着大型高功率激光装置输出水平.本研究利用离线亚纳秒激光预处理技术有效地提升了大口径DKDP晶体抗激光损伤性能.实际使用情况表明,采用离线亚纳秒激光预处理后,DKDP晶体在9 J/cm²激光通量辐照下的表面平均损伤密度得到大幅下降,由未处理前的5.02 pp/cm²(1pp表示1个百分点)降至0.55 pp/cm²,降幅为一个数量级.同时,激光预处理对晶体损伤尺寸具有一定的抑制作用,预处理后晶体损伤点尺寸分布曲线向尺寸减小的方向平移,尺寸分布峰值由预处理前的25μm降至预处理后的18—20μm.     

LaAlO_3/SrTiO_3界面增强光伏效应

探索LaAlO_3/SrTiO_3(LAO/STO)界面产生的新奇物理特性对理解关联电子系统中多自由度耦合和设计功能材料器件具有重要的价值.本文通过脉冲激光沉积方法在SrTiO_3基底上制备了LAO/STO薄膜,研究了正面照射LAO/STO膜面和侧面照射LAO/STO界面时的光伏效应,探讨了LAO/STO界面对光伏效应的影响.研究结果表明,在同样光照能量下侧面照射LAO/STO界面产生的光电压远高于正面照射LAO/STO膜面产生的光电压,说明LAO/STO界面对光伏效应有明显的增强作用.通过偏压调控可以进一步增强照射LAO/STO界面产生的光电压,当偏压为60 V时, LAO/STO样品的位置探测灵敏度达到了36.8 mV/mm.这些研究结果为设计场调控位置敏感探测器等新型光电子器件提供了新的思路.     

自旋轨道耦合Su-Schrieffer-Heeger原子链系统的电子输运特性

在Su-Schrieffer-Heeger (SSH)原子链中,电子在胞内和胞间的跳跃依赖于其自旋时,即SSH原子链存在自旋轨道耦合作用时,存在不同缠绕数的非平庸拓扑边缘态.如何探测自旋轨道耦合SSH原子链不同缠绕数的边缘态是一个重要问题.本文在紧束缚近似下研究了自旋轨道耦合SSH原子链的非平庸拓扑边缘态性质及其零能附近的电子输运特性.研究发现四重和二重简并边缘态的缠绕数分别为2和1;并且仅当源极入射电子的自旋被极化(铁磁电极)时,自旋轨道耦合SSH原子链在零能附近的电子输运特性才能反映其边缘态的能谱特性.尤其是,随着自旋轨道耦合SSH原子链与左、右导线之间的耦合强度由弱到强改变,对于缠绕数为2的四重简并边缘态,入射电子在零能附近的透射峰数目将从4个变为0;而对于缠绕数为1的二重简并边缘态情形,其透射峰数目将从2个变为0.因此,在源极为铁磁电极的情形下,通过观察自旋轨道耦合SSH原子链在零能附近电子共振透射峰的数目随着其与左、右导线之间耦合强度的变化,来探测其不同缠绕数的边缘态.上述结果为基于电子输运特性探测自旋轨道耦合SSH原子链不同拓扑性质的边缘态提供了一种可选择的理论方案.     

纵磁作用下真空电弧单阴极斑点等离子体射流三维混合模拟

真空电弧的特性直接受到从阴极斑点喷射出的等离子体射流的影响,对等离子体射流进行数值仿真有助于我们深入了解真空电弧的内部物理机制.然而,磁流体动力学和粒子云网格仿真方法受限于计算精度和计算效率的原因,无法有效地应用于真空电弧等离子体射流仿真模拟.本文开发了一套三维等离子体混合模拟算法,并在此基础上建立了真空电弧单阴极斑点射流仿真模型,模型中将离子作宏粒子考虑,而电子作无质量流体处理,仿真计算了自生电磁场与外施纵向磁场作用下等离子体的分布运动状态.仿真结果表明,单个阴极斑点情况下真空等离子体射流在离开阴极斑点后扩散至极板间,其整体几何形状为圆锥形,离子密度从阴极到阳极快速下降.外施纵向磁场会压缩等离子体,使得等离子体射流径向的扩散减少并且轴线上的离子密度升高.随着外施纵向磁场的增大,其对等离子体射流的压缩效应增强,表现为等离子体射流的扩散角度逐渐减小.此外,外施纵向磁场对等离子体射流的影响也受到电弧电流大小的影响,压缩效应随电弧电流的增加而逐渐减弱.     

Synthesis,Structures, and Luminescent Properties of Lanthanide Complexes with Triphenylphospine Oxide

Seven lanthanide complexes [Ln(OPPh₃)₃(NO₃)₃] ( 1 – 3 ) (OPPh₃ = triphenylphosphine oxide, Ln = Nd, Sm, Gd), [Dy(OPPh₃)₄(NO₃)₂](NO₃) ( 4 ), [Ln(OPPh₃)₃(NO₃)₃]₂ ( 5 – 7 ) (Ln = Pr, Eu, Gd) were synthesized by the reactions of different lanthanide salts and OPPh₃ ligand in the air. These complexes were characterized by single‐crystal X‐ray diffraction analysis, elemental analysis, IR and fluorescence spectra. Structure analysis shows that complexes 1 – 4 are mononuclear complexes formed by OPPh₃ ligands and nitrates. The asymmetric units of complexes 5 – 7 consist of two crystallographic‐separate molecules. Complex 1 is self‐assembled to construct a 2D layer‐structure of (4,4) net topology by hydrogen bond interactions. The other complexes show a 1D chain‐like structure that was assembled by OPPh₃ ligands and nitrate ions through C–H ··· O interactions. Solid emission spectra of compounds 4 and 6 are assigned to the characteristic fluorescence of Tb³⁺ (λ_em = 480, 574 nm) and Eu³⁺ (λ_em = 552, 593, 619, 668 nm).     

Template-directed syntheses of two 3D metal oxalates: in situ N-methylation and crystal structures

Two isomorphic organically templated zinc/cobalt oxalates, (dmdabco)[Zn₂(C₂O₄)₃]·4H₂O (1), and (dmdabco)[Co₂(C₂O₄)₃]·4H₂O (2) (C₂O₄^2? = oxalate; dmdabco = N,N′-dimethyl-1,4-diazabicyclo[2,2,2]octane), have been prepared under solvothermal conditions and characterized by X-ray structural analyses. The dmdabco²⁺ templating agent was derived from simple in situ N-alkylation between methanol and 1,4-diazabicyclo[2,2,2]octane (dabco). Distinct from conventional Eschweiler-Clarke methylation containing excess formic acid and formaldehyde, such one-step methylation from methanol molecules is convenient. Both 1 and 2 exhibit a uninodal 3-connected 3-D interrupted open-framework, in which oxalate ligands have in-plane and out-of-plane connection modes.     

Hydrogen evolution assisted deposition of a three-dimensional porous nickel film for the electrocatalytic oxidation of histamine

Microchimica Acta - The authors describe an electrochemical sensor for ultrasensitive voltammetric of histamine (HA) by using a gold electrode that was modified with a film consisting of...     

A pyrene-based dual chemosensor for colorimetric detection of Cu2+ and fluorescent detection of Fe3+

A pyrene based chemosensor was designed and synthesized. The pyrene fluorophore was connected with a pyridine unit through a Schiff base structure to give the sensor (L). L was tested with a variety of metal ions and exhibited high colorimetric selectivities for Cu²⁺ and Fe³⁺ over other ions. Upon binding with Cu²⁺ or Fe³⁺, L showed an obvious optical color change from colorless to pink for Cu²⁺ or orange for Fe³⁺ over a wide pH range from 3 to 12. Moreover, the fluorescence of L at 370 nm decreased sharply after bonding with Fe³⁺, while other metal ions including Cu²⁺ had no apparent interference. Thus, using such single chemosensor, Cu²⁺ and Fe³⁺ can be detected independently with high selectivity and sensitivity. The limits of detection toward Cu²⁺ and Fe³⁺ were 8.5 and 2.0 μM, respectively. DFT calculation results also proved the formation of stable coordination complexes and the phenomenon of fluorescence quenching by Fe³⁺. Furthermore, L was also successfully used as a bioimaging reagent for detection of Fe³⁺ in living cells.