SnO2TiO2 复合半导体纳米薄膜的研究进展*

本文概述了SnO₂TiO₂ 复合半导体纳米薄膜的发展历史和研究现状,对比分析了“混合”、“核壳”和“叠层”3 种复合薄膜的结构和性能特点,着重论述了叠层结构的SnO₂ /TiO₂复合薄膜的光电化学和光催化特性。结合作者的研究工作,探讨了SnO₂ /TiO₂双层复合薄膜上下层厚度对其光催化活性的影响,指出复合薄膜光催化活性的提高可归因于电子从TiO₂ 向SnO₂ 的迁移。最后对SnO₂ /TiO₂复合薄膜的局限性和发展潜势做一简要分析,强调了该复合薄膜本身的应用特点。     

蛋白质的电化学分析研究进展

对蛋白质的电化学分析的进展及应用进行综述。从蛋白质的极谱行为、在固体电极上的电化学行为、催化氢波、与小分子物质的配合作用等多角度介绍了近期的研究热点,分析了蛋白质化学研究的意义与现状,并对今后的发展方向作了展望,引用相关文献28篇。     

Silver nanocomposite layer-by-layer films based on assembled polyelectrolyte/dendrimer

Silver nanocomposite multilayer films were prepared through the in situ method. Multilayer thin films, prepared through the sequential electrostatic deposition of a positively charged third-generation poly(amidoamine) dendrimer (PAMAM) and negatively charged poly(styrenesulfonate) (PSS) and poly(acrylic acid) (PAA), were utilized as nanoreactors for the formation of silver nanoparticles. The silver ions were preorganized in layer-by-layer (LBL) films composed of PAMAM dendrimers and subsequently reduced with hydrogen to prepare the silver nanoparticles. The UV-vis spectrum and profilometer were used to characterize the regular growth of bilayers. UV-vis absorption from plasmon resonance at 435 nm and TEM images indicated the formation of the silver nanoparticles in the multilayer films. The silver nanocomposite LBL films were also constructed on the indium tin oxide-glass and investigated using cyclic voltammetry. The silver nanoparticles in the multilayer films have a stronger negative redox potential. The silver nanocomposite LBL films may have a potential application in the catalysis of reduction of 4-nitrophenol with sodium borohydride.     

Microfluidic differential resistive pulse sensors

This study demonstrates an on-chip resistive pulse-sensing scheme with a design of symmetric mirror channels, which significantly reduces the noise and achieves better signal-to-noise ratio. Polystyrene particles of different sizes have been detected with the developed sensing scheme and a record low volume ratio of the particle to the sensing channel, or 0.0004%, has been detected with particles of 520 nm in diameter in a sensing aperture of 50x16x20 microm3. This volume ratio is about ten times lower than the lowest volume ratio reported in the literature including that specified for commercial Coulter counters.     

Comparison of different methods to measure contact angles of soil colloids

We compared five different methods, static sessile drop, dynamic sessile drop, Wilhelmy plate, thin-layer wicking, and column wicking, to determine the contact angle of colloids typical for soils and sediments. The colloids (smectite, kaolinite, illite, goethite, hematite) were chosen to represent 1:1 and 2:1 layered aluminosilicate clays and sesquioxides, and were either obtained in pure form or synthesized in our laboratory. Colloids were deposited as thin films on glass slides, and then used for contact angle measurements using three different test liquids (water, formamide, diiodomethane). The colloidal films could be categorized into three types: (1) films without pores and with polar-liquid interactions (smectite), (2) films with pores and with polar-liquid interactions (kaolinite, illite, goethite), and (3) films without pores and no polar-liquid interactions (hematite). The static and dynamic sessile drop methods yielded the most consistent contact angles. For porous films, the contact angles decreased with time, and we consider the initial contact angle to be the most accurate. The differences in contact angles among the different methods were large and varied considerably: the most consistent contact angles were obtained for kaolinite with water, and illite with diiodomethane (contact angles were within 3 degrees); but mostly the differences ranged from 10 degrees to 40 degrees among the different methods. The thin-layer and column wicking methods were the least consistent methods.     

竞争-竞争-互惠交错扩散模型的整体解

应用能量估计方法和bootstrap技巧证明了竞争-竞争-互惠交错扩散模型在空间维数小于6时古典解的整体存在性.当反应函数的系数满足一定条件时,应用Lyapunov函数获得了该模型解的收敛性.     

粘弹性方程全离散化有限体积元格式及数值模拟

本文利用有限体积元方法研究二维粘弹性方程, 给出一种时间二阶精度的全离散化有限体积元格式, 并给出这种全离散化有限体积元解的误差估计, 最后用数值例子验证数值结果与理论结果是相吻合的. 通过与有限元方法和有限差分方法相比较, 进一步说明了全离散化有限体积元格式是求解二维粘弹性方程数值解的最有效方法之一.     

Improvement of the Performance of an Acousto-Optical Q-Switched Nd:YAG 946 nm Laser Using a Convex–Plane Cavity

We improve the performance of an acousto-optical Q-switched Nd:YAG 946 nm laser using a convex–plane cavity. We obtain the highest output average power of 2.3 W with a pulse width of 15.3 ns in a 10 kHz 946 nm laser with a convex–plane cavity. The maximum peak power 15.0 kW is about three times higher than that in a plane–plane cavity. Also we investigate the output performances of the pulsed 946 nm laser with the convex–plane cavity at 20 and 50 kHz.     

Theoretical analysis on double Rayleigh backscattering noise in optical fibreRaman amplifiers and its suppression

In this paper, amplified double Rayleigh backscattering noise (DRB) in the optical fibre Raman amplifier is analysed. Expressions are presented for both forward pumping and backward pumping schemes. Calculation is performed to show the effective suppression of DRB noise by employing an optical isolator. The optimal position for the isolator is determined and is found to be insensitive to the power levels of the signals and pumps. The results show that a reduction of the DRB noise by almost 2 to 3 orders can be reached.     

辉光等离子体辅助化学气相沉积低温合成金刚石薄膜的研究

采用辉光放电等离子体增强化学气相沉积 (GP CVD)技术在低温条件下合成了高品质的亚微米金刚石薄膜 ,并通过对合成过程的实时发射光谱诊断确定了 [CH4 H2 ]系统参与金刚石合成反应的主要荷能粒子。对合成过程的研究表明 :采用这种技术能使电子增强热丝化学气相沉积 (EACVD)合成高品质金刚石薄膜的温度从 85 0℃降至 (340± 5 )℃ ;薄膜低温合成中的主要荷能粒子为CH3 、CH ,CH+ 、H 等 ,其中过饱和原子氢保证了高品质金刚石薄膜的合成 ;根据光诊断和探针测量的结果推断近表面辉光放电可在基片表面形成电偶极层 ,该偶极层是进行超常态反应的必要环境 ,并在低温合成中起重要作用