Ionic Liquid‐Hemoglobin‐Carbon Paste Composite Bioelectrode and Its Electrocatalytic Activity

A new carbon ionic liquid paste bioelectrode was fabricated by mixing hemoglobin (Hb) with graphite powder, ionic liquid 1‐ethyl‐3‐methylimidazolium tetrafluoroborate (EMIMBF₄) and liquid paraffin homogeneously. Nafion film was cast on the electrode surface to improve the stability of bioelectrode. Direct electrochemistry of Hb in the bioelectrode was carefully investigated. Cyclic voltammetric results indicated that a pair of well‐defined and quasi‐reversible electrochemical responses appeared in pH 7.0 phosphate buffer solution (PBS), indicating that direct electron transfer of Hb was realized in the modified electrode. The formal potential (E^0′) was calculated as ?0.316 V (vs. SCE), which was the typical characteristic of the electrochemical reaction of heme Fe(III)/Fe(II) redox couple. Based on the cyclic voltammetric results the electrochemical parameters of the electrode reaction were calculated. This bioelectrode showed high electrocatalytic activity towards the reduction of trichloroacetic acid (TCA) with good stability and reproducibility.     

Ultrasensitive nucleic acid detection using confocal laser scanning microscope with high crystalline silver dendrites

A new kind of silver micro-dendrites with no surfactants protected has been synthesized for the separation and detection of DNA merely by earth gravity as the density of silver is larger than that of water. Through this approach, the DNA of human T-lymphotropic virus type I (HTLV-I) can be detected down to 10 pM with the detection range from 10 pM to 100 nM.     

Formation of Surface Traps on Quantum Dots by Bidentate Chelation and Their Application in Low‐Potential Electrochemiluminescent Biosensing

Bidentate chelation, meso‐2,3‐dimercaptosuccinic acid (DMSA), was used as a stabilizer for the synthesis of CdTe quantum dots (QDs). The bidentate chelate QDs, characterized with FT‐IR, PL, and UV/Vis spectroscopy; element analysis; and high‐resolution transmission electron microscope, exhibited surface traps due to the large surface/volume ratio of QD particle and the steric hindrance of the DMSA molecule. The unpassivated surface of the QDs produced a narrower band gap than the core and electrochemiluminescent (ECL) emission at relatively low cathodic potential. In air‐saturated pH 7.0 buffer, the QDs immobilized on electrode surface showed an intense ECL emission peak at ?0.85 V (vs. Ag/AgCl). H₂O₂ produced from electrochemical reduction of dissolved oxygen was demonstrated to be the co‐reactant, which avoided the need of strong oxidant as the co‐reactant and produced a sensitive analytical method for peroxidase‐related analytes. Using hydroquinone/horseradish peroxidase/H₂O₂ as a model system, a new, reagentless, phenolic, ECL biosensor for hydroquinone was constructed, based on the quenching effect of ECL emission of QDs by consumption of co‐reactant H₂O₂. The biosensor showed a linear range of 0.2–10 μM with acceptable stability and reproducibility. This work opens new avenues in the search for new ECL emitters with excellent analytical performance and makes QDs a more attractive alternative in biosensing.     

中空纤维协同液相微萃取在4种莨菪碱分析中的应用

利用协同液相微萃取方法初步探讨氢溴酸山莨菪碱、硫酸阿托品、氢溴酸东莨菪碱和丁溴酸东莨菪碱的优势构象;阐明有机溶剂对4种莨菪碱的萃取选择性和协同萃取作用机理;探讨中空纤维与莨菪碱形成电荷转移超分子对萃取效果的影响以及4种莨菪碱结构中N原子的亲电能力;结合高效液相色谱技术测定药物制剂中4种莨菪碱的含量。4种莨菪碱的线性范围均为0.05～5mg/L(r0.99),方法RSD小于7%,消旋山莨菪碱片和颠茄片中平均回收率分别为95.0%～119.0%和93.0%～95.0%,氢溴酸山莨菪碱和丁溴酸东莨菪碱检出限为0.03mg/L,硫酸阿托品和氢溴酸东莨菪碱检测出限为0.01mg/L。     

聚合物前驱体法制备立方相WO_3薄膜的光电化学性质

以(NH4)6W7O24·6H2O为钨源,聚乙二醇1000(PEG 1000)为配位聚合物,采用聚合物前驱体法制备了WO3薄膜,利用X射线衍射(XRD)、扫描电子显微镜(SEM)、紫外-可见(UV-Vis)吸收光谱等手段对其结构进行表征.采用循环伏安法、Mott-Schottky测试、瞬态光和稳态光电流谱等方法研究了WO3薄膜电极的光电化学性能.结果表明,制备的WO3薄膜为立方晶系,禁带宽度约为2.7eV.当热处理温度为450℃时,载流子浓度达到最大2.44×1022cm-3,平带电位为0.06V,在500W氙灯光源照射和1.2V偏压下,光电流密度为2.70mA·cm-2.进一步探讨了热处理温度对其光电性质的影响及其机理.     

半径位置微扰对形状不同的空气孔结构二维光子晶体波导透射的影响

分析了不同空气孔形状的光子晶体受位置和半径微扰对于透射的影响,包括圆形,方形与椭圆形.仿真结果发现及形状相同微扰程度下,通过比较透射平坦带宽部分的分析得到透射率对位置微扰更加敏感.慢光区域正方形空气孔对于位置微扰表现较好,圆形空气孔对于半径微扰更稳健.由于不同形状的空气孔光子晶体波导结构有各自的优势,因此研究微扰对透射...     

不同产地珠子参中微量元素含量分析

分析不同产地珠子参中微量元素的含量变化情况。应用电感耦合等离子体-原子发射光谱法（ICP-AES）测定不同产地珠子参中Ca、Cr、Cu、Fe、Ga、Li、Mg、Mn、Ni、Sn、Sr、Ti、Tl、V、Zn、Pb 16种微量元素的含量。结果表明,不同产地珠子参中各微量元素含量有所差异,陕西宁强产珠子参中Ca、Mg、Mn、Zn、Cu等含量高于其他产地。珠子参中微量元素的含量与产地的土壤、水质等有关。     

锥形碳氮结构的发光性能

利用偏压增强化学气相沉积系统,以CH4、H2和NH3为反应气体,分别在沉积有钛膜和碳膜的Si衬底上制备锥形碳结构,并用扫描电子显微镜、X射线能谱仪和显微Raman光谱仪对其进行表征,结果表明所制备的样品为锥形碳氮结构.用显微Raman光谱仪对锥形碳氮结构在室温下的发光性能进行了研究,发光谱显示出中心在621,643,7...     

金属醇盐法制备Ta2O5气凝胶

 以乙醇钽为前驱物,采用金属醇盐溶胶-凝胶技术,获得了Ta₂O₅湿凝胶,分析了不同条件下的溶胶-凝胶过程,并初步探讨了凝胶过程机理。Ta₂O₅的溶胶-凝胶过程主要受到水量、催化剂用量及钽源浓度等因素的影响：体系在强酸性条件下凝胶,且随着酸性的增强,体系凝胶时间明显缩短;当水量较少时,凝胶时间随水量的增加而增加,但当水量增加到一定程度时,体系凝胶时间基本不变;实验证明,通过增大溶剂用量,体系凝胶时间延长,气凝胶理论密度降低。通过对溶胶-凝胶过程的控制,结合超临界干燥技术,获得了密度低至44 mg/cm³的Ta₂O₅气凝胶样品。     

采用高分辨电镜分析Cu掺杂聚-4-甲基-1-戊烯泡沫材料采用高分辨电镜分析Cu掺杂聚-4-甲基-1-戊烯泡沫材料

利用物理掺杂的方法,制备了铜掺杂聚-4-甲基-1-戊烯(PMP)低密度泡沫材料,采用高分辨扫描电子显微镜和透射电子显微镜,分析了泡沫材料的微观结构、成分及微区成分分布。结果表明:与PMP泡沫相比,铜掺杂PMP泡沫的孔洞直径和网络骨架尺寸变大;铜颗粒镶嵌在PMP泡沫的有机骨架上且有团聚现象;泡沫材料中除碳、铜外,还残留有杂质元素氧;铜颗粒被PMP泡沫包裹,与碳网络骨架之间接触紧密。