Solvent terminated natural deep eutectic solvent microextraction for concentration of curcuminoids in Curcumae Longae Rhizoma and turmeric tea

A novel solvent terminated microextraction method based on a natural deep eutectic solvent (L-menthol and lactic acid at a molar ratio of 1:2) coupled with high-performance liquid chromatography was proposed, which was utilized for the separation and enrichment of bisdemethoxycurcumin, demethoxycurcumin and curcumin in Curcumae Longae Rhizoma and turmeric tea. The effects of independent parameters on extraction efficiency were optimized by single-factor analysis. Subsequently, four predominated parameters affecting the extraction procedure, including extractant volume, salt concentration, demulsifier consumption, and demulsification time, were further evaluated by a central composite design. Under the optimized conditions, the linear ranges of calibration curves were 0.005–0.5 μg/mL for bisdemethoxycurcumin, 0.004–0.4 μg/mL for demethoxycurcumin, and 0.0045–0.45 μg/mL for curcumin, respectively. In addition, the developed method provided low detection limits (0.1–0.4 ng/mL) and high enrichment factors (279–350). Its intra-day and inter-day precision were carried out by relative standard deviation ranging from 2.2 to 9.2%. Finally, the applicability of this method was assessed by the analysis of Curcumae Longae Rhizoma and turmeric tea samples. The results showed that these samples were detected successfully and the spiked recoveries over the range of 85.3-108.9% with relative standard deviations of 1.6-8.9% were attained, indicating its high relative recoveries with good precision in real sample analysis.     

Basis Sets Dependency in Constructing Spectroscopy-Accuracy Ab Initio Global Electric Dipole Moment Functions

Recently, more attention have been paid on the construction of dipole moment functions (DMF) using theoretical methods. However, the computational methods to construct DMFs are not validated as much as those for potential energy surfaces do. In this letter, using Ar...He as an example, we tested how spectroscopyaccuracy DMFs can be constructed using ab initio methods. We especially focused on the basis set dependency in this scenario, i.e., the convergence of DMF with the sizes of basis sets, basis set superposition error, and mid-bond functions. We also tested the explicitly correlated method, which converges with smaller basis sets than the conventional methods do. This work can serve as a pictorial sample of all these computational technologies behaving in the context of constructing DMFs.     

Recent advances in microbial fuel cell-based toxicity biosensors: Strategies for enhanced toxicity response

Microbial fuel cells (MFCs) have been extensively studied as self-powered toxicity biosensors; however, their applications are limited by the relatively poor toxicity responses. The toxicity responses are known to be related to the factors such as the resistance of species to toxicants, the bioavailability of toxicants and the type of sensing elements. Accordingly, some strategies have already been proposed to enhance the toxicity responses in the past several years, including the external resistance tuning, quorum sensing effect, shear stress control, nutrient level control, electrode material choice, sensing element choice, and cell configuration design. This work introduces and discusses these strategies, and the suggestion for future work is also provided finally.     

Tandem Synthesis of Tetrasubstituted NH Pyrroles from Simple Nitriles

An efficient tandem route to obtain tetrasubstituted NH pyrroles in a one-pot manner has been developed, staring from simple nitriles, ethyl bromoacetates, and zinc. This reaction involves oxidative dimerization of the zinc bromide complex of β-enaminoesters using cerium ammonium nitrate (CAN) as an oxidant, affording 2,3,4,5-tetrasubstituted pyrroles in yields up to 91%.     

Novel Amphiphilic Block Copolymers for the Formation of Stimuli-Responsive Non-Lamellar Lipid Nanoparticles

Non-lamellar lyotropic liquid crystalline (LLC) lipid nanoparticles contain internal multidimensional nanostructures such as the inverse bicontinuous cubic and the inverse hexagonal mesophases, which can respond to external stimuli and have the potential of controlling drug release. To date, the internal LLC mesophase responsiveness of these lipid nanoparticles is largely achieved by adding ionizable small molecules to the parent lipid such as monoolein (MO), the mixture of which is then dispersed into nanoparticle suspensions by commercially available poly(ethylene oxide)–poly(propylene oxide) block copolymers. In this study, the Reversible Addition-Fragmentation chain Transfer (RAFT) technique was used to synthesize a series of novel amphiphilic block copolymers (ABCs) containing a hydrophilic poly(ethylene glycol) (PEG) block, a hydrophobic block and one or two responsive blocks, i.e., poly(4-(4,4,5,5-tetramethyl-1,3,2-dioxaborolan-2-yl)benzyl acrylate) (PTBA) and/or poly(2-(dimethylamino)ethyl methacrylate) (PDMAEMA). High throughput small angle X-ray scattering studies demonstrated that the synthesized ABCs could simultaneously stabilize a range of LLC MO nanoparticles (vesicles, cubosomes, hexosomes, inverse micelles) and provide internal particle nanostructure responsiveness to changes of hydrogen peroxide (H₂O₂) concentrations, pH and temperature. It was found that the novel functional ABCs can substitute for the commercial polymer stabilizer and the ionizable additive in the formation of next generation non-lamellar lipid nanoparticles. These novel formulations have the potential to control drug release in the tumor microenvironment with endogenous H₂O₂ and acidic pH conditions.     

Structural and Electronic Influences on Rates of Tertpyridine−Amine CoIII−H Formation During Catalytic H2 Evolution in an Aqueous Environment

In this work, the differences in catalytic performance for a series of Co hydrogen evolution catalysts with different pentadentate polypyridyl ligands (L), have been rationalized by examining elementary steps of the catalytic cycle using a combination of electrochemical and transient pulse radiolysis (PR) studies in aqueous solution. Solvolysis of the [Co^II−Cl]⁺ species results in the formation of [Co^II(κ⁴-L)(OH₂)]²⁺. Further reduction produces [Co^I(κ⁴-L)(OH₂)]⁺, which undergoes a rate-limiting structural rearrangement to [Co^I(κ⁵-L)]⁺ before being protonated to form [Co^III−H]²⁺. The rate of [Co^III−H]²⁺ formation is similar for all complexes in the series. Using E_1/2 values of various Co species and pK_a values of [Co^III−H]²⁺ estimated from PR experiments, we found that while the protonation of [Co^III−H]²⁺ is unfavorable, [Co^II−H]⁺ reacts with protons to produce H₂. The catalytic activity for H₂ evolution tracks the hydricity of the [Co^II−H]⁺ intermediate.     

Copper Nanoparticles In鄄Situ Anchored on Nitrogen鄄Doped Carbon for High鄄Efficiency Oxygen Reduction Reaction Electrocatalyst北大核心CSCD

Compared with noble metal platinum (Pt)-based catalysts, inexpensive non-noble metal electrocatalysts have attracted extensive attention for oxygen reduction reaction (ORR). Herein, chitosan as a kind of biomass resource rich in nitrogen and carbon was used to prepare nitrogen-doped carbon (N-C) and N-C in-situ anchored by copper nanoparticles (Cu/N-C). The as-obtained N-C and Cu/N-C nanoparticles were successfully used as non-noble eletrocatalysts tested for ORR. Compared with the N-C, the Cu/N-C showed the high surface area of 607.3 m2窑g-1 with the mean pore size of 2.5 nm and the pore volume of 0.40 cm3窑g-1. The most positive Gibbs free energy change was the rate determining step for ORR process with the 4e mechanism, where the value of the Cu (111)/N-C(-0.39 eV) was lower than that of the N-C(-0.26 eV). The Cu/N-C exhibited superior onset and half-wave potentials (0.96 V and 0.84 V, respectively) in alkaline media (0.1 mol窑L-1 KOH), all of which are much better than those measured for N-C and commercial Pt/C. Furthermore, the Cu/N-C showed superior methanol crossover avoidance and oxygen reduction stability. © 2021 Authors. All rights reserved.     

Conductive 2D Metal-organic Framework (Co,NiCo, Ni) Nanosheets for Enhanced Non-enzymatic Detection of Urea

2D metal-organic framework (MOF) has potential applications in electrocatalysis owing to fast mass transfer, charge transfer and large specific surface area. Here, we had prepared three conductive 2D MOF based on Ni, NiCo and Co in a simple and rapid way. The 2D nanostructure of MOF was confirmed by SEM and TEM. The chemical composition was studied by XRD, Raman and XPS spectrum. The electrochemical oxidation and detection was investigated through cyclic voltammetry and current-time method. Their sensing performance for urea was determined by varying oxidation potentials and metal sites. The non-enzymatic Ni-, NiCo- and Co-MOF sensors had good catalytic activity for urea. Compared with NiCo- and Co-MOF, Ni-MOF had a wider linear range (0.5–832.5 μM), high sensitivity (1960 μA mM⁻¹ cm⁻²), low detection limit (0.471 μM), and fast response time. The sensors had well repeatability, reproducibility, and selectivity to specific interfering species. Furthermore, Ni- and NiCo-MOF modified electrode was also applied to detection of milk samples. The results showed that the recovery was satisfactory, which further confirmed the effectiveness of non-enzyme sensor. In general, the highly-sensitive 2D Ni- and NiCo-MOF modified electrode has great potential as nonenzymatic urea sensors for real samples detection in hydrogen energy, clinical diagnostics, and environmental protection, et al.     

A 100 kHz Narrow-Pulse-Width Mid-Infrared Optical Parametric Oscillator Based on PPMgLN Crystal

We report a narrow pulse width optical parametric oscillator based on periodically poled MgO:LiNbO₃ (PPMgLN) with a high repetition rate under quasi-phase matched conditions. When the maximum pumping power of the 1,064-nm laser was 14.57 W, the acousto-optical (A-O) Q-switch repetition rate was 100 kHz, and the PPMgLN crystal grating period was 29.5 μm. A 1,474-nm signal light output power of 4.21 W and a 3,828 nm idler light output power of 1.547 W were obtained, corresponding to a pulse width of 9.52 ns and 9.65 ns, respectively. The overall optical–optical conversion efficiency was 39.5%. Additionally, by changing the temperature from 25°C to 150°C, a tunable signal wavelength of 1,474–1,499 nm and idler wavelength at 3,676–3,828 nm of the output laser were achieved.     

V掺杂ZnO透明导电薄膜研究

本文分别采用磁控溅射技术与基于密度泛函理论的平面波赝势方法两种方式, 对高价态差元素V掺杂ZnO薄膜进行研究. 实验研究结果表明: V的掺入并未改变ZnO的生长方式, 所制备的薄膜都呈(002)择优生长; 随着衬底温度增加, VZO薄膜的结晶质量逐步改善, 当衬底温度超过280 ℃时薄膜的结晶质量恶化; 在280 ℃时获得的VZO薄膜电阻率最低3.8×10^-3 Ω·m, 500-2000 nm平均透过率高于85%. 理论模拟结果表明: V以替位形式掺入ZnO六角纤锌矿晶格结构中, 费米能级进入导带, 材料表现出n 型半导体的特性, 导电电子主要由V 3d及O 2p电子轨道提供. 理论计算结果与实验结果的一致性, 表明VZO薄膜具有作为高效Si基薄膜太阳电池透明导电薄膜的应用潜力.