Study of Chiral Ionic Liquid as Stationary Phases for GC

Due to the synthetic flexibility and special enantioselectivity, chiral ionic liquids (CILs) have heightened interest and an increasing number of CILs has been designed and utilized. In this work, CIL named l-1-butyl-3-(2-propionic-1-ether) imidazolium bromide ([BAlaIM]Br) derived from natural amino acids was synthesized, with chiral center at cation moiety. Chiral stationary phases for gas chromatography were then prepared by mixing the CIL with polymeric ionic liquid ([PSOMIM][NTf₂], homemade) at different ratios (4:1, 2:1, and 1:1). The column efficiency was measured to be about 3,200 plates m^?1 (8 m × 0.25 mm i.d.) when the content of [BAlaIM]Br was 50 % (mass percent) in the mixed stationary phase. All columns were coated via the static coating method using 0.30 % (w/v) of stationary phases dissolved in methanol. The results showed that the CIL contributed to the selectivity of stationary phase toward positional isomers dichlorobenzenes, methylnaphthalenes and pinenes, etc. Meanwhile, [BAlaIM]Br showed better selectivity for enantiomers such as carvones, citronellals, limonenes and camphors. The interactions between chiral selector and enantiomers were also discussed.     

Theoretical study of electronic structure of rhodium mononitride and interpretation of experimental spectra

Potential energy curves of 22 electronic states of RhN have been calculated by the complete active space second‐order perturbation theory method. The X¹Σ₀⁺ is assigned as the ground state, and the first excited state a³Π₀+ is 978 cm^?1 higher. The ¹Δ(I) and B¹Σ⁺ states are located at 9521 and 13,046 cm^?1 above the ground state, respectively. The B¹Σ⁺ state should be the excited state located 12,300 cm^?1 above the ground state in the experimental study. Moreover, two excited states, C¹Π and b³Σ⁺, are found 14,963 and 15,082 cm^?1 above the X¹Σ⁺ state, respectively. The transition C¹Π₁–X¹Σ₀⁺ may contribute to the experimentally observed bands headed at 15,071 cm^?1. There are two excited states, D¹Δ and E¹Σ⁺, situate at 20,715 and 23,145 cm^?1 above the X¹Σ⁺ state. The visible bands near 20,000 cm^?1 could be generated by the electronic transitions D¹Δ₂–a³Π₁ and E¹Σ⁺₀–X¹Σ⁺₀ because of the spin–orbit coupling effect. © 2013 Wiley Periodicals, Inc.     

Zinc-Mediated Cyclodimerization of 1,5-Diaryl-1,4-pentadien-3-one in Aqueous Solution Under Ultrasound Irradiation

Synthesis of 2-cinnamoyl-1-styryl-3,4-diarylcyclopentanol via cyclodimerization of 1,5-diaryl-1,4-pentadien-3-one mediated by zinc was carried out in good yields at room temperature in NH₄Cl (aq.) and tetrahydrofuran under ultrasonic irradiation. In comparison with conventional methods, the main advantages of the present procedure are shorter reaction time and better yields.     

Electroless plating of copper on fly ash cenospheres using polyaniline‐Pd activation

The polyaniline of different intrinsic oxidation states, viz., the emeraldine (EM) and the leucoemeraldine (LM) states, were coated on 3‐aminopropyltriethoxy silane modified fly ash cenospheres. Without prior sensitization by SnCl₂ solution, Pd activation by PdCl₂ solution was carried out on EM and LM laden cenospheres, followed by electroless plating of copper (Cu). The topography and composition of the composites were characterized by scanning electron microscopy, X‐ray diffraction, and X‐ray photoelectron spectroscopy, etc. The results indicate that the oxidation state of the LM layer showed a much bigger increase than that of the EM layer in the Pd activation process, while coupled Pd reduction underwent to a more extent on the LM layer. The metallic Pd atoms on the LM and EM layers surface initiated the subsequent electroless plating of Cu, and the coated Cu on LM laden cenospheres had a much more uniform and compact morphology than that on EM laden cenospheres. Copyright © 2012 John Wiley & Sons, Ltd.     

Improved staining of phosphoproteins with high sensitivity in polyacrylamide gels using Stains‐All

An improved Stains‐All (ISA) staining method for phosphoproteins in SDS‐PAGE was described. Down to 0.5–1 ng phosphoproteins (α‐casein, β‐casein, or phosvitin) can be successfully selectively detected by ISA stain, which is approximately 120‐fold higher than that of original Stains‐All stain, but is similar to that of commonly used Pro‐Q Diamond stain. Furthermore, unlike the original Stains‐All protocol that was time consuming and light unstable, ISA stain could be completed within 60 min without resorting to protect the gels from light during the whole staining procedure. According to the results, it is concluded that ISA stain is a rapid, sensitive, specific, and economic staining method for a broad application to the research of phosphoproteins.     

Fluorescent staining of protein in SDS polyacrylamide gels by salicylaldehyde azine

As a noncovalent fluorescence probe, in this study, salicylaldehyde azine (SA) was introduced as a sensitive fluorescence‐based dye for detecting proteins both in 1D and 2D polyacrylamide electrophoresis gels. Down to 0.2 ng of single protein band could be detected within 1 h, which is similar to that of glutaraldehyde‐silver stain, but approximately four times higher than that of SYPRO Ruby fluorescent stain. Furthermore, comparative analysis of the MS compatibility of SA stain with SYPRO Ruby stain indicated that SA stain is compatible with the downstream of protein identification by LC‐MS/MS. Additionally, the probable mechanism of the SA stain was investigated by molecular docking. The results demonstrated that the interaction between SA and protein was mainly contributed by hydrogen bonding and hydrophobic forces.     

Influence of Emulsifiers on Acrylate Latex Blends

The poly(methyl methacrylate/butyl acrylate/acrylic acid) [P(MMA/BA/AA)] and poly (styrene/butyl acrylate/acrylic acid) [P(St/BA/AA)] latexes were synthesized using the emulsifier octylphenol polyoxyethylene(10) ether (OP-10) and ammonium sulfate allyloxy nonylphenoxy poly(ethyleneoxy)(10) ether(DNS-86). The optimum amount of OP-10 and DNS-86 was 1.5% and 2.5% respectively. The P(MMA/BA/AA) and P(St/BA/AA) latex containing 1.5% OP-10 or 2.5% DNS-86 were blended pairwise. The performances of latex blends and parent latexes as a function of emulsifiers content in parent latexes were determined. The results indicated that the stability of latex blends is favorable, and particle size distribution was more uniform and thermal stability was improved after blending.     

Alignment of liquid crystals induced by a photopolymerized self‐assembled film

An alignment film derived from a photopolymerized self‐assembled film may be used to orient nematic liquid crystals after irradiating the film with linearly polarized UV (LPUV). A photosensitive cationic amphiphile was first synthesized containing two double bonds and which could be polymerized by UV. A layer‐by‐layer self‐assembled multilayer film was next prepared in an aqueous solution of the cationic amphiphile and poly(sodium 4‐styrenesulphonate); the UV‐Vis spectra showed that each layer of the LBL multilayer film was uniform. When the film was irradiated by LPUV, the photosensitive double bonds underwent [2+2] cycloaddition along the vector direction of LPUV. The polarized UV‐Vis absorption spectra also provided evidence that the film was anisotropic, i.e. the photopolymerization was along a certain direction. The anisotropic film was used as an alignment layer for nematic liquid crystals, and observations under a polarizing microscope indicated that the alignment of the liquid crystals was good, as expected, and that the orientation direction of the liquid crystals was always perpendicular to the electric vector of the irradiating LPUV.     

酸碱解聚玉米秸秆分子结构的实验研究

以玉米秸秆为研究对象,分别采用5%H2SO4和5%NaOH溶液对秸秆进行解聚处理,并对解聚前后秸秆结构、化学组成、热稳定性等进行分析和表征。结果表明,与未处理前相比,经酸或碱解聚处理后,秸秆纤维结晶度由51.8%分别提高到63.5%和67.0%,秸秆中大部分半纤维素和部分木质素组分被脱除,半纤维素由29.10%分别降至7.02%和6.86%,木质素由38.12%分别降至32.21%和16.52%,而纤维素则由31.54%分别升至60.54%和76.15%。经酸碱处理后,秸秆表面形态结构变得疏松,出现小孔和裂缝,降解温度达到350℃,热稳定性能增加。上述结果说明,稀酸或稀碱均对玉米秸秆分子结构有一定程度的解聚作用,但就解聚溶出木质素而言,稀碱的解聚溶出效果要优于稀酸的。     

Synthesis and Properties of Oval‐Shaped Iron Oxide/Ethylene Glycol Mesostructured Nanosheets

We have demonstrated a new and facile bottom‐up protocol for the effective synthesis of oval‐shaped iron oxide/ethylene glycol (FeO_x/EG) mesostructured nanosheets. Deprotonated ethylene glycol molecules are intercalated into iron oxide layers to form an interlayer distance of 10.6 Å. These materials display some peculiar magnetic properties, such as the low Morin temperature T_M and ferromagnetism below this T_M value. CdSe/ZnS nanoparticles can be loaded onto these mesostructured nanosheets to produce nanocomposites that combine both magnetic and fluorescence functions. In addition, iron oxide/propanediol (or butanediol) mesostructured materials with increased interlayer distances can also be synthesized. The developed synthetic strategy may be extended toward the creation of other ultrathin mesostructured nanosheets.