强激光加载下金属材料微喷回收诊断

金属材料在冲击载荷下的动态响应在许多民用工程、航空航天等领域都有重要的应用背景.而金属材料在冲击载荷下的微喷形成过程,包括微射流、碎裂以及微层裂的物理过程的研究中尚存在许多空白.介绍了国内首次在神光Ⅲ原型激光装置上开展的金属材料微喷回收实验,实现了激光加载下低密度泡沫材料对微喷颗粒的回收,对回收样品进行了X光CT分析,通过图像重建,获得了回收微喷颗粒的三维图像,以及颗粒不同形态分布、颗粒尺寸、颗粒质量等定量结果.     

基于PIα控制的分数阶超混沌Chen系统同步研究

本文提出一种PIα控制器设计方法,实现了分数阶超混沌Chen系统的混沌同步．首先针对分数阶超混沌Chen系统设计了PIα控制器,然后利用改进的双参数Mittag-Leffler函数估计定理和扩展的Gronwall引理证明了系统的稳定性,并指出了使分数阶超混沌Chen系统同步的控制器参数需满足的条件．仿真结果证实了所设计方法的有效性．     

铜丝水中电爆炸能量沉积特性

对s脉冲电压作用下铜丝水中电爆炸的能量沉积过程进行了实验研究,利用自积分Rogowski线圈和电阻分压器分别测量铜丝电爆炸时的电流和电压。利用测量电压波形确定了熔融起始、熔融结束、汽化起始和击穿时刻点,将铜丝电爆炸划分成熔融、液态和汽化3个阶段。通过数学方法计算了3个阶段和击穿前的沉积总能量。通过实验和计算,分析了电路参数,包括放电电压和回路电感,以及铜丝特性,包括铜丝长度和直径,对铜丝电爆炸过程中3个阶段和击穿前沉积总能量的影响。结果表明:在s脉冲电压作用下,放电电压、回路电感、铜丝长度和直径对熔融阶段能量沉积影响较小,但对液态和汽化阶段能量沉积影响较大,通过调节电路参数提高电流上升速率,可以显著提高汽化和击穿前的沉积能量。     

微流控制备单分散微米级SiO2微球

采用软模板法制备出了聚二甲基硅氧烷微流控装置。利用该装置讨论了正硅酸乙酯和氨水的用量分别对反应体系凝胶化时间的影响,确定了制备SiO2微球的优化反应体系,即二甲基乙酰胺、正硅酸乙酯和氨水的体积比为8∶4∶1,实验所需的反应温度为60 ℃。实验发现:在微流体通道中,分散相的流速越大,粒径越大;连续相流速越大,粒径越小。因此,通过控制微流控装置中分散相和连续相的流速制备了粒径40~220 m的单分散SiO2微球,并对其形貌进行表征。光学显微镜和粒径分析均表明所制备的SiO2微球球形度高,单分散性好。     

基于整体柱的超灵敏表面增强拉曼检测

本文提出了一种全新的基于整体柱材料的SERS检测方法。通过将探针分子和银溶胶混合后滴加在整体柱上, 我们可以得到浓度低至10-18 mol/L的罗丹明6G(R6G)及10-16 mol/L的对巯基苯胺(PATP)的SERS信号。利用原子力显微镜(AFM)和扫描电镜(SEM)对银溶胶及整体柱材料进行了表征。通过实验结果可以初步推测, 整体柱材料的表面形态和孔结构可以促进银溶胶产生“热点”。     

Quasi-elastic scattering of the proton drip line nucleus 17F on 12C at 60 MeV

The quasi-elastic scattering angular distribution of the proton drip line nucleus ¹⁷F on a ¹²C target was measured at 60 MeV. The experimental data have been compared with the theoretical analysis based onto optical model and continuum discretized coupled channels (CDCC). The couplings between breakup and elastic scattering channels, and between inelastic and elastic scattering channels resulted very weak. In order to explore the breakup effects the total reaction cross-section was deduced from the angular distribution of the quasi-elastic scattering data, and then compared with the existing data for the other weakly and tightly bound nuclei on ¹²C target using a universal function. From this comparison, we concluded that the breakup effect is not important for weakly bound projectiles on the light target as obtained also with the CDCC analysis.     

Exploration of the sum of flexoelectric coef ficients of nematic liquid crystals

We present a theoretical calculation of the dependence of reflectivity Rpp of the improved fully leaky waveguide geometry,which comprises pyramid,matching fluid,and strongly anchored hybrid aligned nematic liquid crystal(NLC) cell on the internal angle.The calculation is based on the multi layer optical theory and the elastic theory of liquid crystals.For different sums of flexoelectric coefficients e11 and e33,the curve of Rpp moves a distance to the left or the right relative to the case of ignoring the flexoelectric effect and the distance of the movement varies with different flexoelectric coefficients.Consequently,the sum of flexoelectric coefficients can be explored by measuring the distance of the movement.     

Modal prediction of atmospheric turbulence wavefront for open-loop liquid-crystal adaptive optics system with recursive least-squares algorithm

For an open-loop liquid-crystal adaptive optics system, its performance is mainly limited by the time delay. We propose a new modal recursive least-squares (RLS) predictive algorithm to overcome this problem. The RLS algorithm has a simple architecture, low computational complexity and a high converging speed. The impact of the number of the foreword prediction frame N and the number of the predictor order M of the RLS predictor is analyzed in detail. The results show that the best foreword prediction frame N must be equal to the system loop delay frame SLDF. The appropriate predictor order M of the RLS predictor is equal to 2 or 3 when there is no measurement noise and it depends on noise ratio N_R when the measurement error cannot be neglected. We present numerical simulations to show the significant improvements brought by the RLS predictor.     

PbS quantum dot fiber amplifier based on a tapered SMF fiber

A PbS quantum dot coated (QD-coated) tapered fiber amplifier with a broad bandwidth is theoretically demonstrated. The QD layer is coated on the surface of a tapered fiber and is excited by the evanescent wave of a pump. An optical gain of 10.5 dB, with a 160-nm broad bandwidth of at 1530-nm center wavelength, is achieved. The gain efficiency is over 4 dB/cm. This QD-tapered fiber amplifier has a concentration control of the QDs, a lower insertion loss, and shows good suppression of amplified spontaneous emission (ASE), while its structure is also quite simple. Therefore, the proposed fiber amplifier has great potential in fiber-optic communication systems.     

High surface plasmon resonance sensitivity enabled by optical disks

We report a systematic, experimental, and theoretical investigation on the surface plasmon resonance (SPR) sensing using optical disks with different track pitches, including Blu-ray disk (BD), digital versatile disk (DVD), and compact disk (CD). Optical reflection measurements indicate that CD and DVD exhibit much higher SPR sensitivity than BD. Both experiments and finite-difference time-domain simulations reveal that the SPR sensitivity is significantly affected by the diffraction order of the SPR peaks and higher diffraction order results in lower sensitivity. Numerical simulations also show that very high sensitivity (～1600 nm per refractive index unit) is achievable by CDs.