Synthesis and characterization of microencapsulated dicyclopentadiene with melamine–formaldehyde resins

Microcapsules containing healing agents have been used to develop the self-healing polymeric composites. These microcapsules must possess special properties such as appropriate strength and stability in surrounding medium. A new series of microcapsules containing dicyclopentadiene (DCPD) with melamine–formaldehyde (MF) resin as shell material were synthesized by in situ polymerization technology. These microcapsules may satisfy the requirements for self-healing polymeric composites. The chemical structure of microcapsule was identified by using Fourier transform infrared (FTIR) spectrometer. The morphology of microcapsule was observed by using optical microscope (OM) and scanning electron microscope. Size distribution and mean diameter of microcapsules were determined with OM. The thermal properties of microcapsules were investigated by using thermogravimetric analysis and differential scanning calorimetry. Additionally, the self-healing efficiency was evaluated. The results indicate that the poly(melamine–formaldehyde) (PMF) microcapsules containing DCPD have been synthesized successfully, and their mean diameters fall in the range of 65.2∼202.0 μm when the adjusting agitation rate varies from 150 to 500 rpm. Increasing the surfactant concentration can decrease the diameters of microcapsules. The prepared microcapsules are thermally stable up to 69 °C. The PMF microcapsules containing DCPD can be applied to polymeric composites to fabricate the self-healing composites.     

Highly Efficient One-Pot Synthesis of 2-Arylmethyl N-Substituted Anilines via Yb（OTf）3 Catalyzed Three-Component Reaction

An efficient method has been developed for one-pot three-component coupling reactions of various aldehydes, 1-cyclohexen-2-one, and primary or secondary amines in the presence of a catalytic amount of Yb（OTf）3 under mild conditions to afford the corresponding 2-arylmethyl N-substituted anilines in good yields. In addition, the catalyst was easily recovered and could be reused for at least four cycles without any loss of activity.     

利用高炉水淬渣制备(Ca/Y)-α-Sialon陶瓷的组织与性能

以高炉水淬渣合成的Ca-α-Sialon粉体为原料采用无压烧结技术制备了（Ca/Y）-α-Sialon陶瓷。通过用排水法、三点弯曲实验法、金相显微镜法、XRD法等手段研究了（Ca/Y）-α-Sialon陶瓷的烧结致密化过程、材料的力学性能、显微组织、相组成和材料的断裂特征。结果表明,适量的Y2O3促进材料的烧结致密化和提高材料的力学性能,但Y2O3过量（大于10%）时对材料的烧结和力学性能不利。掺杂Y^3＋的（Ca/Y）-α-Sialon呈柱状晶,随着Y2O3含量的增加和烧结温度的提高,（Ca/Y）-α-Sialon呈柱状晶出现粗化和等轴化。含10%Y2O3的材料在1700℃烧结时可获得较高的力学性能。     

水相锌二次电池正极材料V2O5/C的电化学性能研究

采用溶胶－凝胶法合成了一种V₂O₅/C复合材料.扫描电镜（SEM）和红外光谱（FTIR）分析表明,这是一种外层V₂O₅胶体包覆内层乙炔分子的多孔复合材料.以V₂O₅/C作正极,锌片为负极,Zn(ClO₄)₂溶液为电解质组成水相锌二次电池,采用循环伏安（CV）和电化学阻抗谱（EIS）等方法研究发现:V₂O₅:C质量比为1:1时电极具有最好的电化学性能,电池开路电压达1.64 V; Zn^2＋能分别在1.01 V和1.26 V处分步嵌入V₂O₅/C结构中A、B两种位置,其嵌入电流密度峰值最高可达70 mA•g^－1,并且具有较好的循环充放电性能;在一定放电深度下,V₂O₅/C电极反应速率受Zn^2＋的扩散过程控制.     

INTROMISSION OF WATER-REPELLENT AND HYDROSCOPIC PROPERTIES SIMULTANEOUSLY TO PP BY PLASMA DISCHARGE METHOD

Plasma-induced surface graft copolymerization of acrylic acid on polypropylene non-woven fabric (PP-g-AA) and polypropylene membrane were reported. The extents of grafting were controlled by the plasma and polymerization condition. Hexadecyltrimethyl ammonium bromide was then coupled with the carboxyl group of PP-g-AA to obtain a polyion complex (PIC). At last, CF4 plasma was used to give PICs hydrophobic property. The moisture regain and water-repellency of the processed PICs was investigated. The surfaces were characterized using ATR FT-IR and XPS. The result indicates that the products have very high ability to adsorb moisture, even better than cotton fiber. At the same time, the products show excellent hydrophobic property, which can‘t be wetted by those reagents whose surface tensions were higher than 327mN/m.     

A Home-made Simple Set-up for Measurement of Electrochemical Surface Tension Spectrum on a Mercury Drop Electrode

A setup for recording surface tension curves at a mercury drop during potential scanning is designed based on photo-sensitive detection system. Surface tension spectrum at Hg drop can be recorded by voltammetric study. A Yb(III)-NO2- catalytic reduction system was used for characterization. The simple, sensitive technique can be expected to provide fresh information on molecular interactions at electrode surfaces.     

Structure and dynamics of metallomacrocycles: recognition of zinc xylyl-bicyclam by an HIV coreceptor

As platforms for the design of metal-based therapeutic and diagnostic agents, macrocycles are rigid enough to provide strong metal binding sites and orient functional groups stereoselectively, yet flexible enough to accommodate structural changes required for induced-fit recognition of biological targets. We consider the recognition of the Zn(II) complex of the bis-tetraazamacrocycle xylyl-bicyclam, a potent anti-HIV agent, by the coreceptor CXCR4, a G-protein-coupled receptor used by HIV for membrane fusion and cell entry. NMR studies show that the macrocycles of Zn(II)(2)-xylyl-bicyclam perchlorate exist in aqueous solution as two major configurations, trans-I (nitrogen chirality R,S,R,S), and trans-III (S,S,R,R). Acetate addition induced a major structural change. X-ray crystallography shows that the acetate complex contains the unusual cis-V cyclam configuration (R,R,R,R and folded) with bidentate coordination of acetate to Zn(II) plus second-coordination-sphere double H-bond formation between diagonal NH protons on the opposite cyclam face and acetate carboxylate oxygens. Detailed 1D and 2D NMR studies show that the major configuration of Zn(II)(2)-xylyl-bicyclam acetate in aqueous solution is cis-V/trans-I. Molecular modeling shows that an analogous cis-V site can be formed when Zn(II)(2)-xylyl-bicyclam binds to CXCR4, involving the carboxylate groups of Asp262 (Zn(II) coordination) and Glu288 (double H-bonding). The second cyclam can adopt the trans-I (or trans-III) configuration with Zn(II) binding to Asp171. These interactions are consistent with the known structure-activity relationships for bicyclam anti-HIV activity and receptor mutation. Consideration of the anti-HIV activity of xylyl-bicyclam complexes of other metal ions suggests that affinity for carboxylates, configurational flexibility, and kinetic factors may all play roles in receptor recognition. For example, Pd(II) cyclam complexes interact only weakly with axial ligands and are inflexible and inactive, whereas Co(III) cyclams bind carboxylates strongly, are configurationally flexible, and yet have low activity. Our findings should aid the design of new generations of active macrocycles including highly specific chemokine receptor antagonists.     

Solvent extraction of uranium(VI) with benzyloctadecyldimethylammonium chloride (BODMAC) from highly concentrated chloride solution

The ²²²Rn emanation fraction (EF) released from the technically enhanced naturally occurring radioactive material (TE-NORM) wastes at certain sites of petroleum and gas production was determined. The samples were analyzed by γ-ray spectrometry to determine the activity concentration of the ²²⁶Ra content, of which the ²²²Rn emanation fraction was calculated. The results showed that the ²²²Rn emanation fraction differs in the oil and gas production sites and it is independent of the activity concentration of ²²⁶Ra. This revised version was published online in August 2006 with corrections to the Cover Date.     

Dependence of Performance of Organic Light-emitting Devices on Sheet Resistance of Indium-tin-oxide Anodes

IntroductionIndium-tin-oxide(ITO) has been widely used asthe anode material in organic light-emitting devices(OLEDs) because of its high transmittance in the visi-ble region and low electrical resistivity. In the pastyears, many investigations focused on …