Amperometric detection of catecholamines with liquid chromatography at a novelly constructed prussian blue chemically modified electrode

A novel Prussian blue chemically modified electrode (CME) was constructed and characterized for liquid chromatography electrochemical detection (LCEC) of catecholamines. Both anodic and cathodic peaks could be obtained by monitoring at constant applied potential at anodic and slightly cathodic potential ranges (0.3-0.7 and -0.2-0.1 V vs. SCE), respectively. When arranged in a series configuration, using the modified electrodes as generating and collecting detectors, extremely high effective collection efficiencies of 0.91 (for norepinephrine) and 0.58 (for dihydroxyphenylacetic acid) were achieved in dual-electrode LCEC for catecholamines; and a linear response range over 3 orders of magnitude and a detection limit of 10 pg were obtained with a downstream CME as the indicating detector.     

Sequential transition States and the valley-ridge inflection point in the formation of a semibullvalene

[structure: see text] Two sequential transition states are calculated at the B3LYP/6-31G(d,p) level for the deazetization of 3b. The intrinsic reaction coordinate for loss of nitrogen passes through a transition state and then a valley-ridge inflection point and ultimately leads to the transition state for the Cope rearrangement of semibullvalene 4b. The energetic and geometrical consequences are discussed.     

反气相色谱法研究聚丙烯结晶动力学及对熔点和结晶度的测定

<正> 研究聚合物的结晶动力学,过去大多采用膨胀计法和解偏振光法。曾有文献报道采用反气相色谱法测得聚乙烯等温结晶线。通过实验可知,测定聚丙烯结晶度时,试样热历史和测定前陈化温度的选择均影响测定结果。此外在测定聚丙烯试样的熔点时,保留图中出现了两个转折,经反复实验证实:此两转折对应于聚丙烯中不同晶形(α-、β-形)的熔点。     

Molecular dynamics studies on octadecylammonium chloride at the air/liquid interface

Molecular dynamics simulations on surfactant octadecylammonium chloride at the air/liquid interface were performed. It was found that the alkyl chains of octadecylammonium would change to order with increasing the concentration of octadecylammonium at the air/liquid interface. Some functions, such as the concentration distributions, the radial distribution function and the mean squared displacement (MSD) were evaluated to investigate the structural properties of interface. We found that the salts can affect octadecylammonium aggregate at the interface: (1) univalent ions, such as chloride and sodium ions, affect slightly the structure of monolayer and (2) bivalent ions, such as sulfate or calcium ions, affect greatly, especially for the bivalent negative ions.     

MCM-41-supported bidentate phosphine palladium(0) complex: a highly active and recyclable catalyst for the Sonogashira reaction of aryl iodides

The first MCM-41-supported bidentate phosphine palladium(0) complex has been prepared. This complex is a highly efficient catalyst for Sonogashira reaction and can be reused at least 10 times without any decrease in activity.     

贮氢材料电极循环寿命的定量预测定时放电半衰期法的应用

贮氢材料电极循环寿命的定量预测定时放电半衰期法的应用韩剑文，袁满雪，周作祥，赖城明（南开大学化学系天津３０００７１）关键词：贮氢电极，循环寿命，半衰期。前文￣［１］讨论了应用定终点电位放电半衰期法来预测贮氢材料电极循环寿命的问题。本文讨论如何采用定时...     

高效液相色谱检测Zn（Ⅱ）、Cd（Ⅱ）、Co（Ⅱ）、Pb（Ⅱ）、Ni（Ⅱ）、Cu（Ⅱ）、Hg（Ⅱ）

用双-(2-羟乙基)二硫代甲酸铵(HEDC)在反相液相色谱中作检测某些金属离子的衍生化试剂，HEDC的金属螯合物微溶于水，可直接水样注射于C18柱中进行检测，范围为0．006～10mg／L相对偏差1％～2％，检测波长254nm，金属汞的整合物在HPLC分析前进行浓缩富集检测限可低至0．06～25μg／L，相对偏差小于2％。     

On-line preconcentration of arsenic from water samples with an anion-exchanger column coupled to a hydride generation ICP system

Summary An on-line anion-exchange preconcentration hydride generation ICP system for the determination of total inorganic arsenic in water is described. The column was packed with strongly basic anion-exchange resin (AG 1-X8). Experimental conditions including pH of the sample solution, eluent, flow rate of eluent, oxidation states of arsenic and competing anion ions were studied. Compared with the conventional continuous hydride generation ICP, a 9.2-fold improvement in sensitivity was obtained with RSD 1–2% at 100 ng/ml. The detection limit (3) was 0.08 ng/ml. The recoveries in water samples were satisfactory. The system provides complete automation of sample loading, eluting and regenerating of the resin.On leave from Shanghai Institute of Metallurgy, Chinese Academy of Sciences, Shanghai, China 200050