聚对甲苯胺修饰电极的研制及其PH特性的研究

本文叙述了聚对甲苯胺修饰电极的制备及其电化学响应特性。在ＰＨ２－１３范围内电极电位与ＰＨ有良好的线性关系，电极响应应快，导电性能良好，抗干扰性能强，不受氧化还原物物质影响。用于测定饮料、湖水的ＰＨ值，结果与玻璃电极测定值基本相符。     

Solid-state synthesis and properties of SmCoO3

In this paper, perovskite oxide SmCoO₃ was prepared by the solid-state reaction method using Co₂O₃ and Sm₂O₃ as raw materials. The structure and properties of the samples were investigated by XRD, Raman spectral techniques, and DC measurements and so on. The results of XRD and Raman spectra showed that the mixtures of Co₂O₃ and Sm₂O₃ can react to produce a single phase perovskite oxide SmCoO₃ around 1353 K. The single-phase SmCoO₃ changes from an insulator to a semi-conductor and transition occurs around 470 K. The thermal expansion coefficient (2.17 × 10⁻⁵ K⁻¹) of the single-phase SmCoO₃ is approximately equal to that of doped LaGaO₃, but much bigger than that of SDC(Ce_0.85Sm_0.15O₂) above 873 K.     

Preparation and thermal decomposition study of pyridinedicarboxylate intercalated layered double hydroxides

Supramolecular 2,3- and 2,5-pyridinedicarboxylate (PDC) intercalated ZnAl-layered double hydroxides (2,3- and 2,5-PDC–ZnAl–LDHs) have been prepared by ion exchange method. The structure and composition of the intercalated materials have been studied by X-ray diffraction (XRD) and inductively coupled plasma emission spectroscopy (ICP). The study indicates that the 2,3-PDC and 2,5-PDC anions are accommodated as interdigitated bilayer and monolayer arrangement respectively between the sheets of LDHs. Furthermore, their thermal decomposition processes were studied by the use of in situ high temperature X-ray diffraction (HT-XRD), and the combined technique of thermogravimetry-differential thermal analysis-mass spectrometry (TG-DTA-MS) under N2 atmosphere. Based on the comparison study on the temperatures of both decarboxylation and complete decomposition of interlayer PDC, it can be concluded that 2,5-PDC–ZnAl–LDHs has higher thermal stability than that of 2,3-PDC–ZnAl–LDHs.     

往复挤压准晶增强快速凝固Mg92.5Zn6.4Y1.1合金

采用往复挤压工艺将快速凝固Mg92.5Zn6.4Y1.1合金薄带在330℃挤压2道次和4道次,然后正挤压制成Φ10 mm的棒材。用OM,TEM,XRD及DTA研究了往复挤压过程中准晶相I-Mg3YZn6弥散析出及对力学性能的影响。研究表明,往复挤压有利于快速凝固Mg92.5Zn6.4Y1.1合金薄带的焊合,获得组织致密、均匀、高强韧合金。往复挤压2道次,相组成为-αMg和准晶I-Mg3YZn6,脱溶析出纳米准晶相较少;4道次相组成为-αMg和准晶I-Mg3YZn6及MgZn相,脱溶弥散析出的纳米I-Mg3YZn6准晶相及MgZn相较多。往复挤压提高材料的拉伸性能,其主要原因是细晶强化和析出强化。     

多核NMR在相图研究中的应用——Na2SO4-Al2(SO4)3-H2O体系的23Na、27Al NMR研究

In the present paper, Na_2SO_4-Al_2(SO_4)_3-H_2O system has been studied by ~(23)Na and ~(27)Al NMR quantitative method. It has been shown that the existence of double salt can be easily identified by this method.     

Improved synthesis of functionalized 5,6-dihydro-pyrimido[4,5-b][1,4]oxazepines

Novel synthetic approaches toward 5,6-dihydro-pyrimido[4,5-b][1,4]oxazepines were reported that led to successful introduction of poorly reactive anilines and various 2-hydroxybenzaldehydes to this therapeutically relevant scaffold. More extensive SAR studies on this scaffold hence became possible.     

27Al和29Si MAS-NMR对Mo/HZSM-5催化剂的研究

使用＾２９Ａｌ固体离分辨核磁技术对甲烷无氧芳构化催化剂Ｍｏ／ＨＺＳＭ－５分子筛进行了研究，发现ＨＺＳＭ－５分子筛本体中仅含有少量非骨架Ａｌ，Ｍｏ物种与分子筛骨架Ａｌ的相互作用随Ｍｏ担载量以及焙烧的温度的升高而增加，在高温焙烧下，Ｍｏ物种会使分子筛骨架严重脱铝，并且生成Ａｌ２（ＭｏＯ４）３新相，最终导致分子筛骨架塌陷，催化性能下降。     

氯代十六烷基吡啶存在下钯与1，4－双肼酞嗪新显色反应的研究

本文研究了１，４－双肼酞嗪（ＤＨＰＨ）与钯的配合显色反应，在阳离子型表面活性剂氯代十六烷基吡啶存在下，在０．１～０．２ｍｏｌ／ＬＨＣｌ溶液中，试剂与钯形成１：１的稳定的黄绿色配合物，最大吸收峰在４００ｎｍ处，表观摩尔吸光系数为２．６×１０￣４，钯量在０～５０μｇ／２５ｍＬ范围内股从比尔定律，方法简便快速，选择性好，已用于催化剂中钯的测定，结果满意。     

Flame atomic absorption spectrometric determination of cadmium and copper in biological reference materials using on-line sorbent extraction preconcentration

Summary Cadmium and copper at the g/g to ng/g level in plant and animal tissue reference materials, and at the g/l level in urine were determined by flame atomic absorption spectrometry using on-line sorbent extraction preconcentration based on flow injection techniques. Bonded silica reversed phase sorbent with octadecyl functional groups (RP-C 18), packed in a 100 l column, was used to collect the diethylammonium-N,N-diethyldithiocarbamate (DDTC) complex formed on-line in the sample digests at low pH. Methanol was used to elute the analyte chelates directly into the nebulizer-burner system of the spectrometer. Small air segments introduced before and after elution prevented the eluent from mixing with the sample solution and increased the sensitivity. A sampling frequency of 85/h could be obtained with a sample loading time of 30 s at a flow rate of 4.0 ml/min. The enrichment factor for both elements was 20 and the enhancement factors, including the effect of the organic solvent and with the flow spoiler removed, were 126 and 114 for cadmium and copper, respectively. The detection limits (3) were 0.15 g/l for cadmium and 0.2 g/l for copper. The precision was 2.3% and 1.4% r.s.d. for 10 g/l Cd and 45 g/l Cu, respectively (n=11). Results for the determination of cadmium and copper in various biological reference materials were typically in good agreement with certified values. Low recoveries were observed, however, for cadmium in samples containing high levels of copper and/or iron, such as bovine liver.On leave from Flow Injection Analysis Research Center, Institute of Applied Ecology, Academia Sinica, Shenyang, China     

反相高效液相色谱分离-安培法检测酚类化合物

本文报道了RP-HPLC-安培法检测测定酚类化合物的条件。在Shim-pack CLC-C_8柱上用含0.05mol/L NaH_2PO_4缓冲溶液的5％甲醇水溶液洗脱分离,于E+1.0V处检测。线性范围在0～7μg/ml,检测限达ng/ml。