实时离子探测器——塑料闪烁体性能的实验研究

利用静电离子加速器对实时离子探测器——塑料闪烁体的特性 (包括灵敏度、动态范围、能量响应, 及空间分辨等)进行了实验研究,并对闪烁体探测器与其他传统的离子探测器的特性进行了比较. 对闪烁体在激光等离子体实验的离子束诊断中的可能应用进行了探讨.塑料闪烁体的应用可满足高重复频率激光等离子体离子加速实验高效率运行的要求,为实验研究提供强有力的支持.     

Enhanced luminescence of Tb by efficient energy transfer from Ce in Sr2B5O9Cl host

Ce³⁺ and Tb³⁺ co-doped Sr₂B₅O₉Cl phosphors with intense green emission were prepared by the conventional high-temperature solid-state reaction technique. A broad band centered at about 315 nm was found in phosphor Sr₂B₅O₉Cl: Ce³⁺, Tb³⁺ excitation spectrum, which was attributed to the 4f-5d transition of Ce³⁺. The typical sharp line emissions ranging from 450 to 650 nm were originated from the ⁵D₄ → ⁷F_J (J = 6, 5, 4, 3) transitions of Tb³⁺ ions. The photoluminescence (PL) intensity of green emission from Tb³⁺ was enhanced remarkably by co-doping Ce³⁺ in the Tb³⁺ solely doped Sr₂B₅O₉Cl phosphor because of the dipole-dipole mechanism resonant energy transfer from Ce³⁺ to Tb³⁺ ions. The energy transfer process was investigated in detail. In light of the energy transfer principles, the optimal composition of phosphor with the maximum green light output was established to be Sr_1.64Ce_0.08Tb_0.1Li_0.18B₅O₉Cl by the appropriate adjustment of dopant concentrations. The PL intensity of Tb³⁺ in the phosphor was enhanced about 40 times than that of the Tb³⁺ single doped phosphor under the excitation of their optimal excitation wavelengths.     

CdS量子点的酿酒酵母仿生合成及光谱表征

以酿酒酵母为载体,常温下利用仿生法成功合成了CdS量子点。荧光发射光谱、紫外吸收光谱以及荧光显微镜照片证明,该方法合成的CdS量子点的荧光发射峰位置在443nm,在紫外灯下能发蓝绿色荧光。透射电子显微镜(TEM)表征结果表明,该仿生法合成的CdS量子点为六方纤锌矿结构。以荧光发射和紫外吸收光谱为性能指标,考察了酿酒酵母生长时期、Cd2+的反应浓度以及反应时间等条件对合成CdS量子点的影响。当酿酒酵母处于生长稳定期初期时,与浓度为0.5mmol.L-1的Cd2+共培养24h后所合成的CdS量子点荧光最强。实验中观察到,换液培养可有效提高酿酒酵母合成CdS量子点的产量。     

10－5000 伏下电子被多原子分子CF4, CF3H, C2F4, C2F6, 及 C2H3F3散射总结面的计算

利用可加性规则和光学势方法计算了能量在10-5000 eV范围内电子被多原子分子CF4, CF3H, C2F4, C2F6, 及 C2H3F3的总结面，并与已有的实验结果和理论计算进行了比较，与这些结果符合得很好。对于CF4, CF3H, C2F4, C2F6, 及 C2H3F3在1000eV以上没有实验数据，本文对实验研究提供了对比和预测的数据。     

氮气在100 eV以下的绝对振子强度密度

在入射电子能量为2500 eV、能量分辨为100 meV的条件下，得到了氮气在100 eV以下的绝对光学振子强度密度和广义振子强度密度；得到了23 eV和31.4 eV两个超激发态的绝对广义振子强度、并讨论了它们的动量转移依赖特性。     

Dependence of stresses on grain orientations in BCC polycrystalline films on substrates

Most thin films have different thermal expansion coefficients from their substrates, thus thermal stresses will be introduced into the films when the temperature is changed during annealing and service. Calculations of these stresses for grains in various crystallographic orientations have been made for seven BCC transition metals Cr, Fe, Mo, Nb, Ta, V and W. Neglecting W, which is isotropic and the stresses are equiaxial and without grain orientation （hkl） dependence, the BCC metals may be grouped into two classes. In the first class （Cr, Mo, Nb and V）, the （100）-oriented grains have the largest stresses, while the stresses σ1 and σ2 in other （hkl）-oriented grains decrease linearly with the increase of the angle between （hkl） and （100）, and with σ1 〈 σ2 except in （100）- and （lll）-oriented grains. In the second class （Fe and Ta）, on the contrary, the （100）-oriented grains have the lowest stresses, and the stresses σ1 and σ2 in other （hkl）-oriented grains increase linearly with the increase of the angle between （hkl） and （100）, and with σ1 〉 σ2 except in （100）- and （111）-oriented grains.     

二维椭圆量子台球中的谱分析

研究了二维椭圆台球中的量子谱和经典轨道之间的对应关系.为尝试求解没有解析波函数和本征能量又不能分离变量的体系，采用了定态展开方法(expansion method for stationary states，简称EMSS)得到尽可能精确的数值解，这是闭合轨道理论被推广到计算开轨道的情况.比较了傅里叶变换谱和经典轨道，发现量子谱的峰位置与经典轨道的长度在可分辨的范围内符合得很好，这是半经典理论为经典与量子力学的联系提供桥梁作用的又一个例子. 关键词： 椭圆量子台球 定态展开方法 闭合轨道理论 量子谱     

A 168-W high-power single-frequency amplifier in an all-fiber configuration

We present a high-power,single-frequency,narrow linewidth fiber amplifier based on master oscillator power amplification chains in an all-fiber configuration.The effect of the delivery fiber on the maximum output power is studied.A home-made 1064-nm seed laser with a 20-kHz linewidth is boosted to 129 W,and limited by stimulated Brillouin scattering(SBS) when the delivery fiber is 1.2 m long.By shortening the delivery fiber length to 0.7 m,the SBS threshold is increased efficiently and the maximum output power rises to 168 W with an 82.9% power conversion efficiency.The experimental results indicate that the output power can be further raised by shortening the delivery fiber length and increasing the pump power.     

The effects of crystal structure on optical absorption/photoluminescence of bis(8-hydroxyquinoline)zinc

In this paper, the transformation processes of two types of bis(8-hydroxyquinoline)zinc: Znq₂ dihydrate and anhydrous (Znq₂)₄ were investigated by X-ray diffraction (XRD), infrared spectra (IR), scanning electron microscope (SEM), differential scanning calorimetry (DSC) and thermogravimetry (TG). The effects of crystal structure on optical properties of bis(8-hydroxyquinoiline)zinc were analyzed. Znq₂ dihydrate can be transformed into anhydrous (Znq₂)₄ during heating under vacuum. Reversal transformation occurs by the interaction between chloroform and (Znq₂)₄. But (Znq₂)₄ was partially transformed into Znq₂ dihydrate by the interaction between ethanol and (Znq₂)₄. The different molecular structure results in different crystal stacking and electronic structure, thereby affect its optical properties.     

Bi induced step-flow growth in the homoepitaxial growth of Au(1 1 1)

Homoepitaxial growth of Au on Bi-covered Au(1 1 1) was studied at room temperature using reflection high-energy electron diffraction (RHEED) and Auger electron spectroscopy (AES). From observations of RHEED it is found that the Au(1 1 1) (23 × 1) reconstruction structure changes to a (1 × 1) by about 0.16-0.5 ML deposition of Bi and to a (2√3 × 2√3)R30° by about 1.0 ML deposition of Bi, respectively. The surface morphology evolution by Bi deposition leads to a change of Au homoepitaxial growth behavior from layer-by-layer to step flow. This indicates that the surface diffusion distance of Au atoms on the Bi-precovered (1 × 1) and (2√3 × 2√3)R30° surfaces is longer than that on the Au(1 1 1) (23 × 1) clean surfaces. A strong surface segregation of Bi was found at top of surface. It is concluded that Bi atoms acted as an effective surfactant in the Au homoepitaxial growth by promoting Au intralayer mass transport.