产电对微生物燃料电池参数的影响

测试了pH值和电导率的变化规律,分析了MFC开路电压的变化情况,为改善MFC的性能提供理论依据.采用驯化培养的菌种,MFC启动时间更短;在恒温、高温和高底物浓度条件下,开路电压更高、更稳.产物在阳极液中的积累会降低开路电压.阴极液和阳极液的pH值的差值与电流正相关.阳极液的电导率会减小,而阴极液的电导率会增大;阳极液中...     

Investigation of crystallographic sites of Eu in La2BaZnO5 by site-selective laser-excitation spectroscopy

La₂BaZnO₅:Eu³⁺ (0.05 mol%) was prepared by a solid-state reaction at high temperature. X-ray powder diffraction analysis confirmed the formation of single phase La₂BaZnO₅. Luminescence properties of La₂BaZnO₅:Eu³⁺ are investigated by site-selective laser-excitation and emission spectroscopy at 18 K. Two different crystallographic sites for Eu³⁺ corresponding to the La³⁺ and Ba²⁺ sites are identified from the ⁷F₀→⁵D₀ excitation spectra obtained by monitoring the ⁵D₀→⁷F_J (J=1, 2, …, 6) emissions. It is found that Eu³⁺ substituted for the Ba²⁺ ion experiences stronger crystal-field strength than Eu³⁺ substituted for the La³⁺ ion. Energy transfer between the two crystallographic Eu³⁺ centers is investigated by luminescence decay curves at 18 K.     

Visible photoluminescence of nanometer-sized SiGe/Si heterostructure fabricated by ion implantation

An innovative fabrication technique for the nanometer-sized SiGe/Si heterostructure was developed in this study. Ge was induced in Si substrate by two-step ion implantation. The spherical SiGe nanoclusters are self-assembled in the Si substrate by subsequent rapid thermal annealing at 1,100 °C. The diameter of the spherical SiGe nanoclusters is 5–7 nm. Visible photoluminescence from this nanometer-sized SiGe/Si heterostructure at room temperature was investigated. We found three peak energies of visible luminescence spectra at 1.97, 2.13, and 2.16 eV, respectively. The luminescence intensity depends on the number of the nanoclusters and will be decreased because of the micro-defects around the heterostructure, which is discussed in detail.     

Unusual resistive switching induced by voltage in La0.7Sr0.3MnO3 thin films

The hysteretic and reversible resistive-switching effect was observed in La_0.7Sr_0.3MnO₃ films at room temperature. The resistive switching was found to be most obvious in films fabricated at 30 Pa oxygen pressure, and more distinct in films fabricated on SrTiO₃ substrates than those fabricated on LaAlO₃ substrates. Moreover, La_0.7Sr_0.3MnO₃ films fabricated at a certain oxygen pressure with indium electrodes showed double ‘8’ type current-voltage loops. Some of the results are explained by considering the influence of the interface effect, electrodes and oxygen vacancies, but the mechanism of the double ‘8’ type current-voltage loops remains an open question.     

Role of quark-interchange processes in evolution of mesonic matter

We divide the cross-section for a meson-meson reaction into three parts. The first part is for the quark-interchange process, the second for quark-antiquark annihilation processes and the third for resonant processes. Master rate equations are established to yield time dependence of fugacities of pions, rhos, kaons and vector kaons. The equations include cross-sections for inelastic scattering of pions, rhos, kaons and vector kaons. Cross-sections for quark-interchange-induced reactions, that were obtained in a potential model, are parametrized for convenient use. The number densities of π and ρ (K and K ^* are altered by quark-interchange processes in equal magnitudes but opposite signs. The master rate equations combined with the hydrodynamic equations for longitudinal and transverse expansion are solved with many sets of initial meson fugacities. Quark-interchange processes are shown to be important in the contribution of the inelastic meson-meson scattering to the evolution of mesonic matter.     

Fabrication of microfluidic optical waveguides on glass chips with femtosecond laser pulses

We describe the fabrication of microfluidic channel structures on the surface of a borosilicate glass slide by femtosecond laser direct writing for optical waveguide application. Liquid with a variable refractive index is fed into the microchannel, serving as the core of the waveguide. We demonstrate that either a multimode or a single-mode waveguide can be achieved by controlling the refractive index of the liquid.     

Calculations of Rydberg energy levels for Ni ⅩⅧ using the weakest bound electron potential model theory

Martin expression about the quantum defect of single-valence atoms is extended to many-valence atoms by identifying the weakest bound electron (WBE) under the weakest bound electron potential model(WBEPM) theory. Six Rydberg series energy levels of 2p6np2P°1/2 (n ≥ 3), 2p6np2P°3/2 (n ≥ 3), 2p6nd2D3/2(n ≥ 3), 2p6nd2D5/2 (n ≥ 3), 2p6nf2F°5/2 (n≥4), and 2p6nf2F°7/2 (n ≥ 4) for Ni ⅩⅧ are calculated by this method. The calculated results are in good agreement with the experimental results.     

Evidences dominating the formation of ZnO nanostructures via in-situ study in an environmental scanning electron microscope

In order to well understand the growth mechanism of the diverse morphology of the ZnO nanostructures, in situ analysis of the formation of different ZnO nanostructures, such as nanowires, nanocombs, and nanosheets, has been conducted in an environmental scanning electron microscope (ESEM). It is found that both nanocombs and nanosheets grew in two-stage heating processes on parent nanowires. The difference is that the nanocombs were synthesized in extremely high pressure of zinc vapor via a self-catalyzed vapor-liquid-solid process, while the ZnO nanosheets were grown in relatively low pressure of zinc vapor. All the growth processes were revealed in real time imaging. It is demonstrated that the change in the growth environments can influence the thickness of the ZnO polycrystalline surface of the zinc powder, which alters the pressure of the zinc vapor and in turn determines the morphology of the final nanostructures.     

Exciplex emission in the blend of two blue luminescent materials

Organic light-emitting diodes (OLEDs) based on the blend of two blue luminescent materials N,N′-bis(1-naphthyl)-N,N′-diphenyl-1,1′-diphenyl-4,4′-diamine (NPB) and 2-(4-biphenylyl)-5(4-tert-butyl-phenyl)-1,3,4-oxadiazole (PBD) were fabricated. The electroluminescence (EL) spectra of this device showed a new emission that is different from their intrinsic exciton emission. Compared with the photoluminescence (PL) spectra of single layer NPB and PBD, respectively, there was an apparent red shift in that of their blend. Thus the exciplex formation in the blend can be concluded due to the similar emission in both PL and EL spectra. The exciplex formation process and the effect of applied voltage were analyzed by Gaussian fitting.     

A method of estimating the noise level in a chaotic time series

An attempt is made in this study to estimate the noise level present in a chaotic time series. This is achieved by employing a linear least-squares method that is based on the correlation integral form obtained by Diks in 1999. The effectiveness of the method is demonstrated using five artificial chaotic time series, the Henon map, the Lorenz equation, the Duffing equation, the Rossler equation and the Chua's circuit whose dynamical characteristics are known a priori. Different levels of noise are added to the artificial chaotic time series and the estimated results indicate good performance of the proposed method. Finally, the proposed method is applied to estimate the noise level present in some real world data sets.