外加电场对光折变高阶响应影响的微扰分析

应用微扰展开法了“跳跃模型”给出了空间电荷场前三阶分量随时间，外加电场等变化的解析表达式，同时讨论了外加电场对各阶空间电荷场建立的影响，当扩散与外加电场可比拟时，外加电场对空间电荷场的影响不大，随着空间电荷场阶数的提高，其达到最大饱和值所需的外加电磁越小，在外加电场作用下，空间电荷场各阶分量随时间呈振荡衰减，直到达到饱和，外加是场越大，振荡越强烈，周期越短，在考虑高阶分量的贡献后，空间电荷场的振荡     

一种求解虚波长路径光网络波长资源优化问题的启发式算法

本文提出了一种虚波长路径光网络的启发式路由选择算法,它可以用来解决以最小化网络所需波长数目为目标的资源优化问题.该算法应用了基于最大概率路径的选路优化策略.对一个样例网络的数值分析结果表明该算法是有效的.     

α,α′-二氧代烯酮环二氮代缩醛的NMR研究

报道了5种新的α，α′-二氧代烯酮环二氮代缩醛化合物的NMR谱，初步探讨了分子结构对化学位移的影响．     

Direct writing waveguides inside YAG crystal by femtosecond laser

A 120 fs Ti-sapphire laser was used to fabricate waveguides in YAG crystal. A 7 mm long waveguide was written at a position of 100 μm below the surface, which shows multimode propagation at 633 nm with optical attenuation of about 0.2 dB/mm. The light guiding occurs in the region around the visible laser-damaged region, indicating that the light guiding area is induced by stress. The waveguide exhibited strong birefringence property with maximum magnitude of about 1.5 × 10⁻⁵. Infrared and Raman spectroscopy analysis indicate there is no change in chemical composition in laser-modified zone.     

Novel approach to preparation of LiMn2O4 core/LiNixMn2−xO4 shell composite

Combining two methods, coating and doping, to modify spinel LiMn₂O₄, is a novel approach we used to synthesize active material. First we coated the LiMn₂O₄ particles with the nickel oxide particles by means of homogenous precipitation, and then the nickel oxide-coated LiMn₂O₄ was calcined at 750 °C to form a LiNi_xMn_2−xO₄ shell on the surface of spinel LiMn₂O₄ particles. Scanning electron microscopy (SEM), Transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD), cyclic voltammetry (CV) and charge-discharge test were performed to characterize the spinel LiMn₂O₄ before and after modification. The experimental results indicated that a spinel LiMn₂O₄ core is surrounded by a LiNi_xMn_2−xO₄ shell. The resulting composite showed excellent electrochemical cycling performance with an average fading rate of 0.014% per cycle. This improved cycle stability is greatly attributed to the suppression of Jahn-Teller distortion on the surface of spinel LiMn₂O₄ particles during cycling.     

Effect of temperature on residual stress and mechanical properties of Ti films prepared by both ion implantation and ion beam assisted deposition

Ti films with a thickness of 1.6 μm (group A) and 4.6 μm (group B) were prepared on surface of silicon crystal by metal vapor vacuum arc (MEVVA) ion implantation combined with ion beam assisted deposition (IBAD). Different anneal temperatures ranging from 100 to 500 °C were used to investigate effect of temperature on residual stress and mechanical properties of the Ti films. X-ray diffraction (XRD) was used to measure residual stress of the Ti films. The morphology, depth profile, roughness, nanohardness, and modulus of the Ti films were measured by scanning electron microscopy (SEM), scanning Auger nanoprobe (SAN), atomic force microscopy (AFM), and nanoindentation, respectively. The experimental results suggest that residual stress was sensitive to film thickness and anneal temperature. The critical temperatures of the sample groups A and B that residual stress changed from compressive to tensile were 404 and 428 °C, respectively. The mean surface roughness and grain size of the annealed Ti films increased with increasing anneal temperature. The values of nanohardness and modulus of the Ti films reached their maximum values near the surface, then, reached corresponding values with increasing depth of the indentation. The mechanism of stress relaxation of the Ti films is discussed in terms of re-crystallization and difference of coefficient of thermal expansion between Ti film and Si substrate.     

Influence of transparent coating thickness on thermoelastic force source and laser-generated ultrasound waves

A numerical model is established to investigate the influence of transparent coating thickness on the laser-generated thermoelastic force source and ultrasound waves in the coating-substrate system by using the finite element method (FEM). Taking into account the effects of thermal diffusion, the finite width and duration of the laser source, as well as the temperature dependence of material properties, the transient temperature distributions are obtained firstly. Applying this temperature field to structure analyses as thermal loading, the thermoelastic stress field and laser-generated ultrasound wave in the specimen are obtained. The generation and propagation of the laser thermoelastically induced stress field and ultrasonic waves in coating-substrate system are presented in detail. The influence of transparent coating thickness on the transient temperature distribution, thermoelastic force source and the laser-generated ultrasound waveforms is investigated. The numerical results indicate that the thermoelastic force source and laser-generated ultrasound waveform are strongly affected by the coating thickness due to the constraint of coating. This method can provide insight into the generation and propagation of the laser-generated stress field in coating-substrate system consisting of a transparent coating and an opaque metallic substrate. It provides theoretical basics to optimize ultrasonic signal generation in particular applications and invert the physical and geometrical parameter of the coating-substrate system more accurately in the experiment.     

Characterization of gadolinium oxide film by pulse laser deposition

In this work, Gd-oxide dielectric films were deposited on Si by pulse laser deposition method (PLD), moreover, the micro-structures and electrical properties were reported. High-resolution transmission electron microscopy (HRTEM) and X-ray diffraction (XRD) indicated that Gd-oxide was polycrystalline Gd₂O₃ structure, and no Gd metal phase was detected. In addition, both interface at Si and Ni fully silicide (FUSI) gate were smooth without the formation of Si-oxide. X-ray photoelectron spectroscopy (XPS) confirmed the formation of Gd₂O₃ and gave an atom ratio of 1:1 for Gd:O, indicating O vacancies existed in Gd₂O₃ polycrystal matrix even at O₂ partial pressure of 20 mTorr. Electrical measurements indicated that the dielectric constant of Gd-oxide film was 6 and the leakage current was 0.1 A/cm² at gate bias of 1 V.     

Enhanced suppression of superconductivity in amorphous films with nano-scale patterning

We have measured the thickness dependence of the superconducting critical temperature, T_c(d_Bi)$T_c(d_{\text{Bi}})$, in amorphous Bi/Sb films patterned with a regular array of holes as well as nanoscale thickness variations. We find that the mean field T_c$T_c$ is suppressed relative to simultaneously produced unstructured films of the same thickness. Surprisingly, however, the functional form for T_c(d_Bi)$T_c(d_{\text{Bi}})$, remains unaffected. The role of the thickness variations in suppressing T_c$T_c$ is compared to the role of the holes, through parameterization of the surface, as measured through AFM/SEM and a proximity effect calculation. These results suggest that these two nanoscale modifications suppress T_c$T_c$ about equally and are consistent with T_c$T_c$ being determined on a microscopic length scale.     

Propagation of coherently combined flattened laser beam array in turbulent atmosphere

The analytical expression for the propagation of a flattened laser beam array in a turbulent atmosphere is derived based on extended Huygens–Fresnel principle. The influence of beam order and turbulent atmosphere on beam quality is studied. It is revealed that the beam quality of a coherently combined laser beam array with higher order is better than its lower order counterpart when propagating in free-space, weak and medium turbulence (i.e. C_n²<10^?13 m^?2/3). The beam quality of higher order beam arrays degrades faster as the intensity of turbulence gets stronger. In the case of propagating in strong turbulence, the beam order has no influence on coherently combined beam quality.