Rank-based deactivation model for networks with age

We study the impact of age on network evolution which couples addition of new nodes and deactivation of old ones. During evolution, each node experiences two stages: active and inactive. The transition from the active state to the inactive one is based on the rank of the node. In this paper, we adopt age as a criterion of ranking, and propose two deactivation models that generalize previous research. In model A, the older active node possesses the higher rank, whereas in model B, the younger active node takes the higher rank. We make a comparative study between the two models through the node-degree distribution.     

The quantum nonthermal radiation and horizon surface gravity of an arbitrarily accelerating black hole with electric charge and magnetic charge

Using a new tortoise coordinate transformation,we discuss the quantum nonthermal radiation characteristics near an event horizon by studying the Hamilton-Jacobi equation of a scalar particle in curved space-time,and obtain the event horizon surface gravity and the Hawking temperature on that event horizon.The results show that there is a crossing of particle energy near the event horizon.We derive the maximum overlap of the positive and negative energy levels.It is also found that the Hawking temperature of a black hole depends not only on the time,but also on the angle.There is a problem of dimension in the usual tortoise coordinate,so the present results obtained by using a correct-dimension new tortoise coordinate transformation may be more reasonable.     

Quantitative evaluation of equatorial small-angle X-ray scattering for cylindrical fibers

Elongated microvoids, internal fibrillar structure, and edge scattering from both surface refraction cause an equatorial streak in small angle X-ray scattering. A model for analyzing the edge scattering of fibers is proposed. Simulation results indicate that the intensity of edge scattering from surface refraction of a cylindrical fiber is strong and makes an important contribution to the equatorial streak. Two factors influence edge scattering intensity. One is the sample-to-detector distance (D); edge scattering intensity increases with increasing D. The equatorial streak becomes weak when D is shortened. The other factor is the refraction index. Edge scattering intensity increases as the real component of the refraction index decreases. In experiment, weak or even no equatorial streaks were found for samples measured in a roughly index-matching fluid. Edge scattering can be eliminated or weakened, and it can be calculated by comparing the intensities of a cylindrical fiber when it is measured in air and in index-matching fluid. The simulation data are basically in agreement with the experimental data.     

表面状态对强流脉冲电子束辐照诱发金属表面熔坑的影响

 为了考察材料晶体学特性对表面熔坑形成机制的影响,利用强流脉冲电子束（HCPEB）对喷丸前、后的304奥氏体不锈钢进行表面辐照处理,对HCPEB诱发的表面熔坑形貌进行了详细的表征。实验结果表明,HCPEB辐照后样品表面形成了大量的火山状熔坑,熔坑数密度和熔坑尺寸随电子束能量的增加而减小,材料表面的杂质或夹杂物容易成为熔坑的核心,并在熔坑形成的喷发过程中被清除,起到净化表面的作用。此外,喷丸前、后样品表面熔坑数密度遵循相似的分布规律,喷丸处理使熔坑数密度显著增大,表明材料的晶体学特性对表面熔坑形成有重要的影响,晶界、位错等结构缺陷是熔坑形核的择优位置。     

Effect of annealing on contact performance and electrical properties of p-type high purity germanium single crystal

Van de Pauw Hall measurement is an effective method to characterize the properties of semiconductors, such as bulk concentration, mobility, and resistivity, all of which are used to describe the purity level in the semiconductors. However, the performance of the ohmic contacts has a direct impact on the reliability and accuracy of the results obtained from the Van de Pauw Hall measurement. In the present work, the influences of different annealing techniques on the performance of the InSn ohmic contacts have been investigated using a High Purity Germanium (HPGe) crystal sample. The results show that the preferred annealing condition is at 400 °C for 1 hour, which has provided a significant improvement of the InSn contact quality and microscopic homogenization of the impurities in the HPGe crystal. The carrier concentration, charge mobility, and resistivity of the sample annealed at 400 °C for 1 hour are 5.772×10¹⁰/cm³, 1.883×10⁴× cm²/Vs, and 5.795×10³×Ω?cm at 77 K, respectively.     

Alkali-treated Si nanowire array for improving solar cell performance

The Si nanowire array (SiNWA) was achieved by metal-assisted etching. The effect of alkali-treating of SiNWA on the photovoltaic performance of solar cells was investigated. We found that the post-chemical treatment of SiNWA on solar cells could reduce (i) the surface reflection and (ii) the thickness of “dead layer” so that the short-wavelength spectral response is enhanced. As a result, a solar-spectrum-averaged reflectance of less than 3 % has been reached, a 3-fold enhancement on the spectral response of post-treated SiNWA cell at the wavelength of 400 nm has been observed, together resulting in a remarkable improvement of 45 % in the conversion efficiency.     

Laser Fabrication of Nanostructures on a Pure Aluminum Surface in Air

We report on the fabrication of surface nanoparticles and micro/nanograting structures on bulk pure aluminum in air using a 150 fs, 775 nm femtosecond laser. We investigate the size of the generated surface nanoparticles under irradiation with different femtosecond laser pulses. Smaller nanoparticles can be induced by a larger number of laser pulses and a lower laser fluence. In addition, we observe the formation of micro/nanogratings when the laser focus is scanned across a pure aluminum surface in air. We obtain micro- and nano-grating composite structures on a pure aluminum surface by adjusting the laser fluence and scan velocity. Femtosecond laser surface ablation of bulk pure aluminum in air is potentially a promising technique for efficient fabrication of surface nanostructures.     

Study of local environment of Cu atoms in Fe73.5Cu1Nb3Si13.5B9 alloy with different annealing temperature

The local environment of Cu atoms in Fe73.5Cu1Nb3Si13.5B9 alloy was investigated by extended X-ray absorption fine structure(EXAFS).Cu clusters began to order when the annealing temperature was around 733 K from the results of the Fourier transform curves.The fitting results showed that the first shell of the near fcc(face-centered cubic)Cu clusters only contained Cu atoms.The coordination number increased with the annealing temperature.Subsequently,the occupancy rate increased from 33.3%(annealed at 733 K)to 100% (annealed at 853 K).This local structural change of Cu atoms could probably affect the distribution of the bcc(body-centered cubic)α-Fe in Fe73.5Cu1Nb3Si13.5B9 alloy.     

The Monte-Carlo simulation on a scintillator neutron detector

A simulation of the properties of the shifting scintillator neutron detector using 6LiF/ZnS(Ag) scintillation screens is performed.The simulation results show that the light attenuation length of standard BC704 scintillator is about 0.65 mm.Its thermal neutron detection efficiency,gamma sensitivity and intrinsic spatial resolution can achieve around 50.0%,10 5and 0.18 mm(along X-axis) respectively.For the detector,air coupling position resolution is better than the silicone oil coupling.Some of the simulation results are compared with experimental results.They are in agreement.This work will be helpful for constructing neutron detector for high intensity powder diffractometer at Chinese spallation neutron source.     

182Os 核yrast带相继SU(3)–U(5)–SU(3)结构相变势能曲面的一种可能理解

基于联合实施微观相互作用玻色子模型的最大F旋方案 (sdIBM-F_max)与γ射线能量-自旋曲线 (γ-ray energy over spin curves, E-GOS)方案, 成功描述了¹⁸²Os核yrast带相继的SU(3)–U(5)–SU(3)结构相变, 由于缺少直观解释而显得抽象. 本文借助微观sdIBM-F_max的微观参数与Bohr哈密顿量的势能曲面方程之间存在的泛函关系, 几何地给出了对这种相继相变途径的另外一种可能理解; 并阐述了在完全变形核的高角动量态中, 由于量子效应在高激发态与低激发态之间生成高简并的临界区, 提供了γ振动能量会变得低于转动能量的一个可能途径, 从而实现了SU(3)–U(5)的相变. 关键词： yrast带结构演化 势能曲面 相变临界区 182Os核')" href="#">¹⁸²Os核