Limit on right handed weak coupling parameters from inelastic neutrino interactions

Right handed weak quark currents coupled to the usual left handed weak lepton current would be seen in inclusive antineutrino scattering on nuclei as a contribution at largey with the quark (not antiquark) structure function. We do not see such a term, and can therefore put an upper limit on the relative strengths of such right handed currents: \(\varrho ^2 = \frac{{\sigma _R }}{{\sigma _L }}< 0.009\) , 90% confidence. This measurement puts limits on the mixing angle of left-right symmetric models. In distinction to similar limits derived from muon decay or β decay, our limits are also valid if the right handed neutrino is heavy.     

Novel Cp2LnX-mediated coupling-cyclization of propargyl bromide: a new construction of the benzene ring skeleton

In the presence of Cp2LnX-HgCl2, the treatment of RC identical to CCH2Br with Mg leads to the formation of benzene derivatives C6H4R2-1,2 (R = H, Ph) in moderate yield, which provides a new method for the construction of the benzene ring skeleton.     

Spectroscopy, NMR and DFT studies on molecular recognition of crown ether bridged chiral heterotrinuclear salen Zn(II) complex

A barium-containing crown ether bridged chiral heterotrinuclear salen Zn(II) complex BaZn2L(ClO4)2, where L is a folded dinuclear chiral (R,R)-salen ligand, has been synthesized and characterized by elemental analysis, 1H NMR, UV-vis, IR, circular dichroism (CD) spectra, and mass spectra. As a folded dinuclear chiral host, its recognition with achiral guests (imidazole derivatives), rigid bidentate guest (1,4-diazobicyclo[2,2,2]octane, DABCO) and chiral guests (amino acid methyl esters) was investigated by means of UV-vis spectrophotometric titration, CD spectra. The association constants of D-amino acid methyl esters are found to be higher than those of their L-enantiomer. The sandwich-type binding of BaZn2L(ClO4)2-DABCO supramolecular assembly was specially studied via 1H NMR titration and 1H ROESY. To understand the recognition on molecular level, density functional theory (DFT) calculations on B3LYP/LanL2DZ were performed on the minimal energy conformations of host, guests, and host-guest complexes. The minimal energy conformations were obtained by molecular mechanics (MM) optimization and molecular dynamics (MD) simulation. The results of single point energy, HOMO energy, and charges transfer were analyzed. The results of theoretical calculations are in good agreement with the experimental data.     

端视ICP-AES法同时测定玩具涂料中可溶性铅、镉、汞、砷、铬、锑、硒和钡

采用端视电感耦合等离子体原子发射光谱(ICP-AES)法同时测定玩具涂料中可溶性铅、镉、汞、砷、铬、锑、硒和钡.对仪器的工作参数和被测元素的分析谱线进行了优化和选择.铅、镉、汞、砷、铬、锑、硒和钡的检出限分别为0.006、0.0009、0.012、0.023、0.000 8、0.013、0.030和0.0006 mg/L.定量下限分别为0.99、0.15、2.0、3.8、0.14、2.2、5.0和0.10 mg/kg.相对标准偏差为0.76%～2.72%(n=8),加标回收率为96.0%～104.0%.该法适用于玩具涂料中铅、镉、汞、砷、铬、锑、硒和钡的快速测定.     

Integrating a Luminescent Porous Aromatic Framework into Indicator Papers for Facile,Rapid, and Selective Detection of Nitro Compounds

Porous aromatic framework materials with high stability, sensitivity, and selectivity have great potential to provide new sensors for optoelectronic/fluorescent probe devices. In this work, a luminescent porous aromatic framework material (LNU-23) was synthesized via the palladium-catalyzed Suzuki cross-coupling reaction of tetrabromopyrene and 1,2-bisphenyldiborate pinacol ester. The resulting PAF solid exhibited strong fluorescence emission with a quantum yield of 18.31%, showing excellent light and heat stability. Because the lowest unoccupied molecular orbital (LUMO) of LNU-23 was higher than that of the nitro compounds, there was an energy transfer from the excited LNU-23 to the analyte, leading to the selective fluorescence quenching with a limit of detection (LOD) ≈ 1.47 × 10⁻⁵ M. After integrating the luminescent PAF powder on the paper by a simple dipping method, the indicator papers revealed a fast fluorescence response to gaseous nitrobenzene within 10 s, which shows great potential in outdoor fluorescence detection of nitro compounds.     

Improved Stretchable and Sensitive Fe Nanowire-Based Strain Sensor by Optimizing Areal Density of Nanowire Network

Flexible strain sensors, when considering high sensitivity and a large strain range, have become a key requirement for current robotic applications. However, it is still a thorny issue to take both factors into consideration at the same time. Here, we report a sandwich-structured strain sensor based on Fe nanowires (Fe NWs) that has a high GF (37–53) while taking into account a large strain range (15–57.5%), low hysteresis (2.45%), stability, and low cost with an areal density of Fe NWs of 4.4 mg/cm². Additionally, the relationship between the contact point of the conductive network, the output resistance, and the areal density of the sensing unit is analyzed. Microscopically, the contact points of the conductive network directly affect the sensor output resistance distribution, thereby affecting the gauge factor (GF) of the sensor. Macroscopically, the areal density and the output resistivity of the strain sensor have the opposite percolation theory, which affects its linearity performance. At the same time, there is a positive correlation between the areal density and the contact point: when the stretching amount is constant, it theoretically shows that the areal density affects the GF. When the areal density reaches this percolation threshold range, the sensing performance is the best. This will lay the foundation for rapid applications in wearable robots.     

Determination of an Unknown Time-dependent Heat Source from A Nonlocal Measurement by Finite Difference Method

In this paper, we consider an inverse time-dependent source problem of heat conduction equation.Firstly, the ill-posedness and conditional stability of this inverse source problem is analyzed. Then, a finite difference inversion method is proposed for reconstructing the time-dependent source from a nonlocal measurement. The existence and uniqueness of the finite difference inverse solutions are rigorously analyzed, and the convergence is proved. Combined with the mollification method, the propos...     

A Novel Aptamer-Imprinted Polymer-Based Electrochemical Biosensor for the Detection of Lead in Aquatic Products

Lead contamination in aquatic products is one of the main hazard factors. The aptasensor is a promising detection method for lead ion (Pb(II)) because of its selectivity, but it is easily affected by pH. The combination of ion-imprinted polymers(IIP) with aptamers may improve their stability in different pH conditions. This paper developed a novel electrochemical biosensor for Pb(II) detection by using aptamer-imprinted polymer as a recognition element. The glassy carbon electrode was modified with gold nanoparticles and aptamers. After the aptamer was induced by Pb(II) to form a G-quadruplex conformation, a chitosan-graphene oxide was electrodeposited and cross-linked with glutaraldehyde to form an imprint layer, improving the stability of the biosensor. Under the optimal experimental conditions, the current signal change (∆I) showed a linear correlation of the content of Pb(II) in the range of 0.1–2.0 μg/mL with a detection limit of 0.0796 μg/mL (S/N = 3). The biosensor also exhibited high selectivity for the determination of Pb(II) in the presence of other interfering metal ion. At the same time, the stability of the imprinted layer made the sensor applicable to the detection environment with a pH of 6.4–8.0. Moreover, the sensor was successfully applied to the detection of Pb(II) in mantis shrimp.     

布里渊散射谱拟合的混合优化算法

基于布里渊光时域分析仪的全分布式光纤传感系统中,光纤沿途的探测信号含有噪声导致被测量的温度或应变信息难以识别,光谱拟合的精确度对传感信息的识别非常重要。在传感系统低信噪比的情况下,提出了一种提取高精度布里渊散射谱特征的拟合方法,利用小波去噪结合莱文伯-马奈特（LM）算法调节权值后向传输(BP)网络对布里渊散射谱进行特征提取。克服了传统BP神经网络易陷入局部极值的缺点,保证求解的精度。数值仿真表明,该方法适合不同权重比、不同线宽和低信噪比以及大测量范围的情况进行光谱拟合,并且在信噪比为10 dB的情况下得到拟合度均超过0.96。实验结果表明,该方法适用于多种泵浦功率情况下的布里渊散射谱的特征提取,优于传统BP神经网络算法且具有较高的拟合精度。     

An unexpected all-metal aromatic tetranuclear silver cluster in human copper chaperone Atox1

Metal clusters, such as iron–sulfur clusters, play key roles in sustaining life and are intimately involved in the functions of metalloproteins. Herein we report the formation and crystal structure of a planar square tetranuclear silver cluster when silver ions were mixed with human copper chaperone Atox1. Quantum chemical studies reveal that two Ag 5s¹ electrons in the tetranuclear silver cluster fully occupy the one bonding molecular orbital, with the assumption that this Ag₄ cluster is Ag₄²⁺, leading to extensive electron delocalization over the planar square and significant stabilization. This bonding pattern of the tetranuclear silver cluster represents an aromatic all-metal structure that follows a 4n + 2 electron counting rule (n = 0). This is the first time an all-metal aromatic silver cluster was observed in a protein.

Metal clusters, such as iron–sulfur clusters, play key roles in sustaining life and are intimately involved in the functions of metalloproteins.