Simultaneous Determination of Oxytetra- cycline, Doxycycline, Tetracycline and Chlortetracycline in Tetracycline Antibiotics by High-Performance Liquid Chromatog- raphy with Fluorescence Detection

A simple, rapid and sensitive high-performance liquid chromatographic method with fluorescence detection for the simultaneous determination of oxytetracycline, doxycycline, tetracycline and chlortetracycline was developed, and successfully applied to the analysis of commercial tetracycline antibiotics. The separation was performed on a reverse-phase C₁₈ column with a gradient elution composed of methanol and sodium acetate buffer (containing disodium ethylenediaminetetraacetate and calcium chloride, pH 8.10) as the mobile phase, and fluorescence detection at 532 nm (excitation at 380 nm). The detection limits for oxytetracycline, doxycycline, tetracycline and chlortetracycline were 0.1, 0.5, 0.3 and 0.4 g L^–1, respectively. Data with respect to precision and accuracy were reported and discussed.     

铁系元素冠醚配合物的研究——V.三氯化铁与4′-溴苯并-15-冠-5固态配合物的合成和性质

本文报导了三氯化铁(水合物)与4′-溴苯并-15-冠-5(L)固态配合物的合成,对合成的新配合物,进行了元素定量分析及摩尔电导测定,并作了红外光谱、紫外光谱,热重和差热以及X-射线粉末衍射分析的性质表征。从而证明,该配合物中FeCl₃与配体L比为1:1,是溶化剂,含有结晶水的固态配合物。     

Cure reaction and phase behavior of liquid crystalline epoxides-anhydride systems

A series of novel liquid crystalline epoxides with lateral substituents were cured with anhydrides and the cure kinetics was investigated by non-isothermal DSC technique. The results showed that the lengths of lateral substituents have great effect on the value of Ea. The curing reaction became less active, when the liquid crystalline epoxides have long lateral substituents and were controlled by diffusion at the late stage of cure. A nematic structure was observed by POM and XRD.     

The effect of B2O3 addition on the crystallization of amorphous TiO2-ZrO2 mixed oxide

The effect of B₂O₃ addition on the crystallization of amorphous TiO₂-ZrO₂ mixed oxide was investigated by X-ray diffraction (XRD), thermogravimetric and differential thermal analysis (TG/DTA). TiO₂-ZrO₂ mixed oxide was prepared by co-precipitation method with aqueous ammonia as the precipitation reagent. Boric acid was used as a source of boria, and boria contents varied from 2 to 20 wt%. The results indicate that the addition of small amount of boria (<8 wt%) hinders the crystallization of amorphous TiO₂-ZrO₂ into a crystalline ZrTiO₄ compound, while a larger amount of boria (?8 wt%) promotes the crystallization process. FT-IR spectroscopy and ¹¹B MAS NMR results show that tetrahedral borate species predominate at low boria loading, and trigonal borate species increase with increasing boria loading. Thus it is concluded that highly dispersed tetrahedral BO₄ units delay, while a build-up of trigonal BO₃ promote, the crystallization of amorphous TiO₂-ZrO₂ to form ZrTiO₄ crystals.     

Curing reaction characteristics and phase behaviors of biphenol type epoxy resins with phenol novolac resins

Diglycidyl ether of 4,4′-dihydroxybiphenol (BPDGE) is a liquid crystalline epoxy. The biphenyl epoxy (diglycidyl ether of 3,3′,5,5′-tetramethyl-4,4′-biphenyl, TMBPDGE) has found great applications in plastic encapsulated semiconductor packaging. Phenol novolac (PN) was used as curing agent. The reaction kinetics of BPDGE/PN and TMBPDGE/PN systems in the presence of triphenylphosphine (TPP) were characterized by an isoconversional method under dynamic conditions using differential scanning calorimetry (DSC) measurements. The results showed that the curing of epoxy resins involves different reaction stages and the values of activation energy are dependent on the degree of conversion. The effects of curing temperature on their phase structure have been investigated with polarized optical microscopy and Wide-angle X-ray diffraction. With proper curing process, BPDGE showed a nematic phase when cured with PN.     

Optimization of on-chip elongation for fabricating double-stranded DNA microarrays

The sequence-specific recognitions between DNA and proteins are playing important roles in many biological functions. The double-stranded DNA microarrays (dsDNA microarrays) can be used to study the sequence-specific recognitions between DNAs and proteins in highly parallel way. In this paper, two different elongation processes in forming dsDNA from the immobilized oligonucleotides have been compared in order to optimize the fabrication of dsDNA microarrays: (1) elongation from the hairpins formed by the self-hybridized oligonucleatides spotted on a glass; (2) elongation from the complementary primers hybridized on the spotted oligonucleatides. The results suggested that the dsDNA probes density produced by the hybridized-primer extension was about four times lower than those by the self-hybridized hairpins. Meanwhile, in order to reduce the cost of dsDNA microarrays, we have replaced the Klenow DNA polymerase with Taq DNA polymerase, and optimized the reaction conditions of on-chip elongation. Our experiements showed that the elongation temperature of 50 °C and the Mg²⁺ concentration of 2.5 mM are the optimized conditions in elongation with Taq DNA polymerase. A dsDNA microarray has been successfully constructed with the above method to detect NF-kB protein.     

Crystal habit of fcc metal particles controlled by electrode potential in solution

The crystal habit of fcc metal particles formed on an amorphous carbon film electrode in solution at different electrode potentials is discussed. The fcc metal particles have different crystallographic habits depending on applied electrode potential; that is, icosahedral and/or decahedral particles are formed at lower potentials, and fcc single-crystalline or polycrystalline particles at higher potentials. It was found that decahedra and icosahedra of Cu-Au alloy particles are formed in the potential region of underpotential deposition (UPD) of Cu at which only fcc Au single-crystalline particles and Au polycrystalline particles appear. This is attributed to the charge transfer from the UPD Cu ions to the Au overlayer of Cu-Au alloy particles. The formation of decahedral and icosahedral Cu-Au alloy particles depends on the composition of the Cu-Au alloy. On the basis of these results it was deduced that the contraction of the surface lattice of the growing particles is responsible for the formation of icosahedral and decahedral particles. Received: 25 February 1997 / Accepted: 21 April 1997     

A facile highly regio- and stereoselective preparation of N-tosyl allylic amines from allylic alcohols and tosyl isocyanate via Palladium(II)-catalyzed aminopalladation-beta-heteroatom elimination

The high regio- and stereoselectivity have been obtained from the allylic substitution reaction catalyzed by palladium(II) species. From allylic alcohols, one-pot reaction with tosyl isocyanate followed by palladium(II)-catalyzed allylic substitution gives N-tosyl (E)-allylic amines in high yield. The substitution occurs only at the gamma-position of the 1- or 3-substituted allylic alcohols.     

Hydrothermal synthesis and crystal structure of a layered vanadium oxide with an interlayer metal coordination complex: [Co(phen)3][V10O26]·H2O

A novel compound, [Co(phen)₃][V₁₀O₂₆]·H₂O, was hydrothermally synthesized and characterized by single-crystal X-ray diffraction. This compound crystallizes in the orthorhombic space group Ccca with a=13.447(3), b=29.936(6), c=23.252(5) Å, V=9360(3) Å³, Z=8 and R=0.0285. Data were collected on a Rigaku R-AXIS RAPID IP diffractometer at 293 K in the range of 1.36<θ<24.99°. The structure of the compound consists of vanadium oxide layers, which are built up from the infinite VO₄ chains by corners and edges sharing. The [Co(phen)₃]²⁺ complexes occupy the interlayer space and contact each other via π−π stacking interactions of the phen groups to form infinite one-dimensional chains.