RF and field measurements of the SSC-LINAC RFQ

The 53.667 MHz continuous-wave heavy ion RFQ has been designed and manufactured for the SSC-LINAC project.This four-rod RFQ accelerates ions with maximum mass to charge ratio of 7 from 3.728 keV/u to 143 keV/u.Measurements have been carried out to check the RF performance of the cavity and the quality of the electric field.The S11 of the power coupler is adjusted to better than-44 dB,and the Q0 of the cavity is 6440.The quality of the electric field is evaluated by the perturbation method.The measurement procedure and data analysis will be discussed in detail.The error due to gravity of the perturbation bead has been corrected by averaging the fields in different quadrants.As a result,the unflatness of the electric field is±2.5%,and the dipole field component distributes from 0%to 20%in different longitudinal positions,which indicates the asymmetry of the quadrupole field.The unflatness of the quadrupole field distribution represents a good agreement with the simulation results.High power RF test and beam commissioning of the RFQ are on schedule in early 2014.     

Derivation of baroclinic Ertel–Rossby invariant-based thermally-coupled vorticity equation in moist flow

For the potential vorticity （PV） invariant, there is a PV-based complete-form vorticity equation, which we use heuris- tically in the present paper to answer the following question： for the Ertel-Rossby invariant （ERI）, is there a corresponding vorticity tendency equation？ Such an ERI-based thermally-coupled vorticity equation is derived and discussed in detail in this study. From the obtained new vorticity equation, the vertical vorticity change is constrained by the vertical velocity term, the term associated with the slope of the generalized momentum surface, the term related to the horizontal vorticity change, and the baroclinic or solenoid term. It explicitly includes both the dynamical and thermodynamic factors＇ influence on the vorticity change. For the ERI itself, besides the traditional PV term, the ERI also includes the moisture factor, which is excluded in dry ERI, and the term related to the gradients of pressure, kinetic energy, and potential energy that reflects the fast-manifold property. Therefore, it is more complete to describe the fast motions off the slow manifold for severe weather than the PV term. These advantages are naturally handed on and inherited by the ERI-based thermally-coupled vorticity equation. Then the ERI-based thermally-coupled vorticity equation is further transformed and compared with the traditional vorticity equation. The main difference between the two equations is the term which describes the contribution of the solenoid term to the vertical vorticity development. In a barotropic flow, the solenoid term disappears, then the ERI-based thermally-coupled vorticity equation can regress to the traditional vorticity equation.     

椭圆偏振技术研究VHF-PECVD高速沉积微晶硅薄膜的异常标度行为

采用VHF-PECVD技术高速沉积了不同生长阶段的微晶硅薄膜,通过椭圆偏振技术研究了生长过程中微晶硅薄膜表面粗糙度的演化.实验结果表明,沉积气压P_g=300 Pa时,β=0.81,其超出标度理论中β最大值为0.5范围,出现异常标度行为.这表明微晶硅薄膜高速生长中还存在其他粗糙化增加的因素,此粗糙化增加的因素与阴影作用有关. 关键词： 微晶硅薄膜 椭偏光谱法 生长机制 表面粗糙度     

LD抽运Cr,Tm,Ho∶YAG微片激光器单纵模运转特性的研究

研究了LD抽运的单纵模Cr,Tm,Ho∶YAG微片激光器,激光器厚度为1?mm,在用波长785?nm的LD进行端面抽运时,激光器阈值为1060?mW,单纵模激光最大输出功率为31?mW. 对激光器输出功率随温度变化特性进行了研究,验证了CTH∶YAG晶体的温度敏感性. 还研究了激光器的温度调谐特性,实验测得激光器的温度调谐系数为14?GHz/℃. 关键词： 激光光学 CTH∶YAG微片激光器 LD抽运 单纵模运转     

大气湍流中超短高斯激光脉冲的时间域展宽模型研究

穿过大气湍流的高斯激光脉冲在时间域的展宽行为与高斯脉冲通过理想高斯滤波器后的时域展宽行为相似。因此,为了激光通信信道仿真的需要,提出用级联巴特沃斯滤波器来逼近理想高斯滤波器的方法对这种时间域上的展宽行为进行建模。逼近后的高斯滤波器的3dB频率点与大气湍流的物理参数(包括折射率结构常数和湍流外尺度)和传播几何路径长度联系在一起,从而将高斯脉冲的展宽与所通过的大气湍流环境参数相结合并得到了模拟高斯脉冲展宽的解析表达式。该模型和由模型参数表示的高斯脉冲展宽的解析表达式不仅在湍流弱起伏区有效,而且在从弱起伏到中等起伏再到强起伏的整个区域中都有效。     

Experimental low energy values of CH4 transitions near 1.33 μm by absorption spectroscopy at 81 K

The high resolution absorption spectrum of methane has been recorded at liquid nitrogen temperature by direct absorption spectroscopy between 1.36 and 1.30 μm (7351-7655 cm⁻¹) using a cryogenic cell and a series of distributed feed back (DFB) diode lasers. The investigated spectral range corresponds to the high energy part of the icosad dominated by the ν₂+2ν₃ band near 7510 cm⁻¹. The positions and strengths at 81 K of 3473 transitions were obtained from the spectrum analysis. The minimum value of the measured line intensities (at 81 K) is on the order of 10⁻²⁶ cm/molecule, i.e. significantly lower than the intensity cut off of the HITRAN database in the region (4×10⁻²⁵ cm/molecule at 296 K). From the variation of the line strength between 81 and 296 K, the low energy values of 1273 transitions could be determined. They represent 69% and 81% of the absorbance in the region at 296 and 81 K, respectively. The obtained results are discussed in relation with the few rovibrational assignments previously reported in the region.     

The influence of Co doping on the dielectric, ferroelectric and ferromagnetic properties of Ba0.70Sr0.30TiO3 thin films

Ba_0.70Sr_0.30TiO₃ (BST) thin films doped by Co (BSTC) are fabricated by sol-gel method on a Pt/Ti/SiO₂/Si substrate. A strong correlation is observed among the microstructure, dielectric, ferroelectric, ferromagnetic properties and Co concentration. The dielectric constant of BST thin films can be tailored from 343 to 119 by manipulating the Co concentration. The dielectric loss of BSTC thin films are still kept below 0.020 and the tunability is above 30% at a dc-applied electric field of 500 kV/cm. With increasing Co doping up to 10 mol%, the coexistence of ferromagnetism and ferroelectrics is found. Suitable dielectric constant, low-dielectric loss, and high tunability of this kind of thin films can be useful for potential tunable applications.     

The study of novel Fe3O4@γ-Fe2O3 core/shell nanomaterials with improved properties

The surface structure of the iron oxide nanoparticles obtained by the co-precipitation method has been investigated, and a thin layer of α-FeOOH absorbed on surface of the nanoparticle is confirmed by analyses of Fourier transform infrared (FTIR), X-ray photoelectron spectra (XPS) and surface photovoltage spectroscopy (SPS). After annealed at 400 °C, the α-FeOOH can be converted to γ-Fe₂O₃. The simple-annealed procedure resulted in the formation of Fe₃O₄@γ-Fe₂O₃ core/shell structure with improved stability and a higher magnetic saturation value, and also the simple method can be used to obtain core/shell structure in other similar system.     

一种估计半导体激光器1/f噪声参数的新方法

对含白噪声的1/f分形信号小波变换系数的方差随尺度变化的关系进行适当的变换,提出了一种基于最小二乘法的估计半导体激光器1/f噪声参数的新方法.实验表明,该方法可以有效地提取出淹没在白噪声中的激光器1/f噪声,而且估计出的噪声信号的功率谱与对比仪器的测量结果有较好的一致性.