Uncoupled metabolism stimulated by chemical uncoupler and oxic-settling-anaerobic combined process to reduce excess sludge production

The effects of three uncoupled metabolic systems (conventional activated sludge process with the addition of 3,3′,4′,5-tetrachlorosalicylanilide [TCS], oxic-settling-anaerobic [OSA] process modified by insertion of a sludge-holding tank in the sludge return line, and TCS and OSA combined process) on reducing excess sludge production were studied. Compared with the control conventional activated sludge process, the most effective system was the combined process, which could reduce excess sludge production by 46.90%. The 180-d operation results confirmed that TCS is an effective chemical uncoupler in reducing the sludge yield but that it had an adverse effect on substrate removal capability, effluent nitrogen concentration, and sludge settleability. The OSA process decreased excess sludge production by only 26% but had less adverse effect on effluent quality and could improve sludge settleability. The effluent total phosphorous concentration of the three systems was slightly lower than of the control unit. Microbial populations were monitored by both microscopic and molecular biologic analysis method (polymerase chain reaction [PCR]-denaturing gradient gel electrophoresis [DGGE]). The presence of TCS caused metazoans to disappear and decreased the number and activity of protozoa. PCR amplification of 16S rRNA and sequent DGGE analysis found a shift in the diversity of the predominant species. The results imply that OSA combined with the chemical uncoupler process may effectively reduce excess sludge yield and not affect process performance significantly.     

Effects of processing on the structure of zein/oleic Acid films investigated by x-ray diffraction

Zein films plasticized with oleic acid were formed by solution casting, by the stretching of moldable resins, and by blown film extrusion. The effects of the forming process on film structure were investigated by X-ray diffraction. Wide-angle X-ray scattering (WAXS) patterns showed d-spacings at 4.5 and 10 A, which were attributed to the zein alpha-helix backbone and inter-helix packing, respectively. The 4.5 A d-spacing remained stable under processing while the 10 A d-spacing varied with processing treatment. Small-angle X-ray scattering (SAXS) detected a long-range periodicity for the formed films but not for unprocessed zein, which suggests that the forming process-promoted film structure development is possibly aided by oleic acid. The SAXS d-spacing varied among the samples (130-238 A) according to zein origin and film-forming method. X-ray scattering data suggest that the zein molecular structure resists processing but the zein supramolecular arrangements in the formed films are dependent on processing methods. Structural model for a zein molecular aggregate (based on Matsushima et al.10). Rectangular prisms of individual zein molecules are hexagonally aligned parallel to each other.     

Facile synthesis of 9-（N-amino-4-fluoromethyl-3-pyrrolidinyl）-2- fluoro-6-aminopurine from trans-4-hydroxy-L-proline

A novel and simple procedure for synthesis of azanucleoside by Mitsunobu reaction between N-(p-nitrobenzyloxycarbonyl)- trans-4-hydroxy-D-proline methyl ester obtained from trans-4-hydroxy-L-proline after six-step reaction and 2-fluoro-6-azidopurine is described,and azanucleoside is fluorinated by new fluridizer 2,2-difluoro-1,3-dimethylimidazolidine (DFI).All reactions could be carded out under mild condition.     

The recent progress of wide bandgap donor polymers towards non-fullerene organic solar cells

The recent progress of wide bandgap (WBG) donor polymers for non-fullerene polymer solar cells (NF-PSCs) were reviewed in detail, which was classified by D-type and D-A type molecular backbones to discuss the related structure-property correlations and put forward an outlook for future innovations.     

Studies on fluorenscence resonance energy transfer between CdS nanoparticles and DOCAI dyes

The water-soluble CdS nanoparticles were synthesized in aqueous solution. A novel fluorescence resonance energy transfer (FRET) system with CdS nanoparticles as energy donors and 3,30-diethyl-oxadicarbocyanine iodide (DOCAI) dyes as energy accepter has been developed.     

氯化钠在球形纳米氧化铈形成过程中的作用

以水合碳酸铈为原料, 以氯化钠作为助磨剂和阻聚剂, 采用机械活化法制备了球形纳米氧化铈, 用XRD法研究了水合碳酸铈与氯化钠质量比、球磨时间、煅烧温度对CeO2粉体晶粒度的影响, 用TEM对最终产物粒子进行形貌观察. 结果表明: 在碳酸铈的球磨过程及其随后的煅烧过程中, 氯化钠的存在起到了很好的助磨和阻聚作用, 所得CeO2为类球形粒子, 分散性较好, 晶粒度约为30～50 nm.     

A simple and general method for the synthesis of multicomponent Na2V6O16.3H2O single-crystal nanobelts

Multicomponent Na2V6O16.3H2O (barnesite) single-crystalline nanobelts were synthesized by a direct reaction-crystallization growth of bulk V2O5 and NaF powders under hydrothermal treatment without using any templates or catalysts. This new strategy could be extended to prepare other one-dimensional multicomponent nanomaterials including ammonium, alkali-metal or alkali-earth metal vanadium oxide bronzes and other transition metal oxyfluorides. This is an efficient and mild solution method with clear advantages over the traditional high-temperature approach for the large-scale production of 1D multicomponent nanomaterials. The applicability of this approach toward the preparation of other inorganic systems, such as tungstates and molybdates, will be explored.     

1‐Acetyl‐3′‐(4‐bromophenyl)‐3′‐chlorospiro[3H‐indole‐3,2′‐oxetan]‐2(1H)‐one

In the title compound, C₁₈H₁₃BrClNO₃, the heterocyclic ring of the indole is distorted from planarity towards an envelope conformation. The orientations of the indole, oxetane, chloro and bromo­phenyl substituents are conditioned by the sp³ states of the spiro‐junction and the Cl‐attached C atoms.     

Molecularly imprinted solid-phase extraction of (-)-ephedrine from Chinese Ephedra

Method of molecularly imprinted solid phase extraction (MISPE) of (-)-ephedrine from Chinese Ephedra has been developed in the research. The molecularly imprinted polymer (MIP) with good selectivity and affinity for (-)-ephedrine was synthesized with (-)-ephedrine as the template, methacrylic acid as the functional monomer. The washing and elution conditions in MISPE were selected and optimized for efficient analyte extraction and sample clean-up. A clean analytical HPLC base line of ephedra extract was obtained after MISPE, which indicated that the sample pre-treatment was efficient. Good recovery and precision were obtained in the assessment for the MISPE-HPLC procedure, which demonstrated it is a reliable method and can be used for the determination of (-)-ephedrine in herbal ephedra.     

Designed nanostructured pt film for electrocatalytic activities by underpotential deposition combined chemical replacement techniques

Multiple-deposited Pt overlayer modified Pt nanoparticle (MD-Pt overlayer/PtNPs) films were deliberately constructed on glassy carbon electrodes through alternately multiple underpotential deposition (UPD) of Ag followed redox replacement reaction by Pt (II) cations. The linear and regular growth of the films characterized by cyclic voltammetry was observed. Atomic force spectroscopy (AFM) provides the surface morphology of the nanostructured Pt films. Rotating disk electrode (RDE) voltammetry and rotating ring-disk electrode (RRDE) voltammetry demonstrate that the MD-Pt overlayer/PtNPs films can catalyze an almost four-electron reduction of O(2) to H(2)O in air-saturated 0.1 M H(2)SO(4). Thus-prepared Pt films behave as novel nanostructured electrocatalysts for dioxygen reduction and hydrogen evolution reaction (HER) with enhanced electrocatalytic activities, in terms of both reduction peak potential and peak current, when compared to that of the bulk polycrystalline Pt electrode. Additionally, it is noted that after multiple replacement cycles, the electrocatalytic activities improved remarkably, although the increased amount of Pt is very low in comparison to that of pre-modified PtNPs due to the intrinsic feature of the UPD-redox replacement technique. In other words, the electrocatalytic activities could be improved markedly without using very much Pt by the technique of tailoring the catalytic surface. These features may provide an interesting way to produce Pt catalysts with a reliable catalytic performance as well as a reduction in cost.