Effect of total percent polyacrylamide in capillary gel electrophoresis for DNA sequencing of short fragments. A phenomenological model.

Polyacrylamide capillary gels were prepared with constant (5% C) cross-linker concentration and with total acrylamide concentration ranging from 2.5 to 6% T. At each acrylamide concentration, peak spacing was constant for DNA sequencing fragments ranging from 25 to 250 nucleotides in length. Peak spacing increased linearly with the total acrylamide concentration. The intercept of the retention time vs. fragment length plot was independent of % T. Ferguson plots were constructed for short DNA fragments; the polyacrylamide pore size falls in the 2.5 to 3.5 nm range for the gels studied. Theoretical plate count is independent of total acrylamide concentration; longitudinal diffusion, and not thermal gradients, limit the plate count. A phenomenological model is presented that predicts retention time, plate count, and resolution for sequencing fragments ranging in size from 25 to 250 bases and gels that range from 2.5 to 6% total acrylamide.     

甲基丙烯酸—磷脂酰乙醇甲基丙烯酰胺共聚物LB膜的研究

制备了不同摩尔比的甲基丙烯酸-磷脂酰乙醇甲基丙烯酰胺共聚物,研究了这种共聚物在水面的表面压力(π)-分子面积(A)曲线、共聚物制成的MOS LB膜的电容(C)-电压(V)特性及此LB膜的相变温度。     

添加非金属元素Si对固体超强酸SO_4~(2-)/TiO_2的改性研究

采用共沉淀法引入Ｓｉ对ＳＯ２－４／ＴｉＯ２进行改性，制得了ＳＯ２－４／Ｔｉ－Ｓｉ－Ｏ系列固体超强酸，试样经ＩＲ、ＳＥＭ、ＸＲＤ表征和低温正戊烷异构化活性测试，发现超强酸中心是硫酸根离子与金属原子Ｔｉ结合形成的双配位螯合结构，在超强酸性的样品中ＴｉＯ２均呈锐钛矿晶型。引入Ｓｉ仅迟滞ＴｉＯ２晶化过程，控制Ｓｉ在ＳＯ２－４／Ｔｉ－Ｓｉ－Ｏ体系中的含量可以有效调节固体超强酸的酸性，并提高正戊烷异构化反应的选择性。     

六氯合铂酸钾与金属硫蛋白的体外反应

本文报道了K₂PtCl₆与兔肝Zn₇MT-Ⅱ和apoMT-Ⅱ的反应包含一个氧化还原反应和一个取代反应。通过紫外可见光谱、园二向色谱、柱层析和X-光电子能谱研究了该反应的性质、铂在反应产物中的键合位置和氧化态。金属硫蛋白(MT)被氧化成单体、双聚和多聚产物，其中含有分子间和分子内CyS-SCy二硫键。Pt(Ⅳ)被还原成Pt(Ⅱ)然后键合于产物中。随着K₂PtCl₆与MT的反应摩尔比和反应时间的增加，键合于产物中的Pt(Ⅱ)的计量数增加而蛋白中所含Zn(Ⅱ)的量减少。当Zn₇MT与4和超过10摩尔的K₂PtCl₆反应时，分别得到了Pt₄Zn₄MT和Pt₈MT。当apoMT与7及超过25倍的K₂PtCl₆在pH 2条件下反应时，分别得到了Pt₇MT和Pt₁₅MT。动力学数据表明K₂PtCl₆与apoMT的反应比与Zn₇MT的反应快。     

二维卷积在动力学分析中的应用

本文用计算机模拟和二维卷积研究了稀土与间乙酰基偶氮氯膦的显色反应，选择不同的模型参数可描述这类反应的细节，二维卷积则增强对叠合二维谱的分辨。     

对钠离子有选择性的中性载体

合成了十一种中性离子载体,用它们制成钠离子选择性电极,测定了电极的选择性系数并与文献报道的类似电极进行了比较。     

Boosting the synthesis of value-added aromatics directly from syngas via a Cr2O3 and Ga doped zeolite capsule catalyst

Even though the transformation of syngas into aromatics has been realized via a methanol-mediated tandem process, the low product yield is still the bottleneck, limiting the industrial application of this technology. Herein, a tailor-made zeolite capsule catalyst with Ga doping and SiO₂ coating was combined with the methanol synthesis catalyst Cr₂O₃ to boost the synthesis of value-added aromatics, especially para-xylene, from syngas. Multiple characterization studies, control experiments, and density functional theory (DFT) calculation results clarified that Ga doped zeolites with strong CO adsorption capability facilitated the transformation of the reaction intermediate methanol by optimizing the first C–C coupling step under a high-pressure CO atmosphere, thereby driving the reaction forward for aromatics synthesis. This work not only reveals the synergistic catalytic network in the tandem process but also sheds new light on principles for the rational design of a catalyst in terms of oriented conversion of syngas.

The single-pass conversion of syngas into para-xylene was realized using a bifunctional catalyst Cr₂O₃/Ga-ZSM-5@SiO₂. The Ga species facilitates the methanol consumption process by C–C coupling optimization, enhancing the yield of the target aromatics.     

SINGLE AND BINARY ADSORPTION PERFORMANCE OF SALICYLIC ACID AND 5-SULFOSALICYLIC ACID ONTO HYPERCROSSLINKED POLYMERIC ADSORBENTS

Single and binary adsorption behaviors of salicylic acid and 5-sulfosalicylic acid onto hypercrosslinked polymeric adsorbents, i.e. NDA-101 and NDA-99 were investigated. The Freundlich model can successfully describe all the adsorption isotherms tested, which indicates a favorable and exothermic adsorption process. The adsorption of salicylic acid relies on π-π interaction, while the electrostatic interaction further influences the adsorption of 5-sulfosalicylic acid onto NDA-99. The adsorptive capacity of salicylic acid on NDA-99 decreases but increases on NDA-101 with 5-sulfosalicylic acid as the background component in a binary solute system. The amount of 5-sulfosalicylic acid adsorbed was decreased with the increase in initial concentration of salicylic acid on both adsorbents. The competition for the adsorption sites is considered to be predominant in the solid-to-liquid interaction process. The adsorption selectivity of salicylic acid onto NDA-101 is higher than onto NDA-99 by more than an order of magnitude. Thus, combination technique involving NDA-101 followed by NDA-99 can be effectively applied to separate and recover salicylic acid and 5-sulfosalicylic acid from wastewater.     

Preparation of [5,6]- and [6,6]-oxahomofullerene derivatives and their interconversion by Lewis acid assisted reactions of fullerene mixed peroxides

[60]Fullerene mixed peroxides C60(O)(OOtBu)4 exhibit chemo- and regioselective reactions under mild conditions. The epoxy moiety is opened by ferric chloride to form vicinal hydroxy chloride C60Cl(OH)(OOtBu)4. BF3 is also effective in opening the epoxy moiety. The O-O bond of the fullerene mixed peroxide is cleaved by aluminum chloride to form both [5,6]- and [6,6]-fullerene hemiketals (oxohomo[60]fullerenes). A Hock-type rearrangement is proposed for the formation of the hemiketals, in which a fullerene C-C bond is cleaved. Lewis acids and/or visible light can initiate isomerization of the hemiketal isomers. Single-crystal X-ray analysis and theoretical calculations confirmed the results.     

Recent Progress in Direct Partial Oxidation of Methane to Methanol

The direct conversion of methane to methanol has attracted a great deal of attention for nearly a century since it was first found possible in 1902, and it is still a challenging task. This review article describes recent advancements in the direct partial oxidation of methane to methanol. The history of direct oxidation of methane and the difficulties encountered in the partial oxidation of methane to methanol are briefly summarized. Recently reported developments in gas-phase homogeneous oxidation, heterogeneous catalytic oxidation and liquid phase homogeneous catalytic oxidation of methane axe reviewed.