Study on the recovery of NBTI of ultra-deep sub-micro MOSFETs

Taking the actual operating condition of complementary metal oxide semiconductor (CMOS) circuit into account, conventional direct current (DC) stress study on negative bias temperature instability (NBTI) neglects the detrapping of oxide positive charges and the recovery of interface states under the `low' state of p-channel metal oxide semiconductor field effect transistors (MOSFETs) inverter operation. In this paper we have studied the degradation and recovery of NBTI under alternating stress, and presented a possible recovery mechanism. The three stages of recovery mechanism under positive bias are fast recovery, slow recovery and recovery saturation.     

Dopant diffusion and surface morphology of vanadium implanted 4H-silicon carbide

The diffusion behaviours of vanadium implanted p- and n-type 4H-SiC are investigated by using the secondary ion mass spectrometry (SIMS). Significant redistribution, especially out-diffusion of vanadium towards the sample surface is not observed after 1650℃ annealing for both p- and n-type samples. Atomic force microscopy (AFM) is applied to the characterization of surface morphology, indicating the formation of continuous long furrows running in one direction across the wafer surface after 1650℃ annealing. The surface roughness results from the evaporation and re-deposition of Si species on the surface during annealing. The chemical compositions of sample surface are investigated using x-ray photoelectron spectroscopy (XPS). The results of C 1s and Si 2p core-level spectra are presented in detail to demonstrate the evaporation of Si from the wafer and the deposition of SiO₂ on the sample surface during annealing.     

Enhanced optical limiting properties in suspensions of CdO nanowires

Optical limiting (OL) properties of CdO nanowires in water and ethanol were investigated by using nanosecond laser pulses at 532 nm. Experimental results show that suspension of CdO nanowires in ethanol exhibits better OL property than solution of C₆₀ in toluene and suspension of CdO nanowires in water. The dominant mechanism for the observed enhanced optical limiting in ethanol suspensions of CdO nanowires is due to nonlinear scattering.     

Jackiw-Pi模型的新涡旋解

运用φ映射拓扑流理论研究了Jackiw-Pi模型中的自对偶方程，得到一个静态的自对偶解满足带有δ函数项的刘维尔方程, 从而得到了一个完整的带有拓扑信息的涡旋解,自然给出了磁通量子化.     

Effective generation of red-green-blue laser in a two-dimensional decagonal photonic superlattice

We demonstrate the effective generation of red, green and blue (RGB) light in a two-dimensional decagonal quasiperiodic LiNbO₃ nonlinear crystal. Owing to the unique abundance in reciprocal vectors (RVs), the RGB signals were generated directly by frequency doublings. Thus the conversion efficiencies of the RGB light were much higher than previously recorded. In addition, the same results were obtained when the crystal was rotated by integral multiples of π/5. This result will aid in the effective generation of RGB in multiple directions and may have important applications in laser-based projection displays. PACS 42.65.Ky; 42.72.Bj; 42.79.Nv     

Effects of the passivation of SiNx with various growth stoichiometry on the high temperature transport properties of the two-dimensional electron gas in AlxGa1−xN/GaN heterostructures

Effects of the passivation of SiN_x on the high temperature transport characteristics of the two-dimensional electron gas (2DEG) in unintentionally doped Al_xGa_1−xN/GaN heterostructures have been investigated by means of high temperature Hall measurements. The 2DEG density increases much after SiN_x passivation, and the increment is proportional to the Si content in SiN_x layer, indicating that the increment is mainly caused by ionized Si atoms at the SiN/Al_xGa_1−xN interface with dangling bonds or by Si atoms incorporated into the Al_xGa_1−xN layer during the SiN_x growth, which is approved by strain analysis and X-ray photoemission spectroscopy (XPS). There is lower 2DEG mobility at room temperature in a passivated sample than in an unpassivated one. However, the 2DEG mobility becomes to be higher in a passivated sample than in an unpassivated one when the temperature is above 250 °C, which is suggested to be caused by different subband occupation ratios in the triangular quantum well at the heterointerface before and after passivation.     

Representation surfaces of Young''s modulus and Poisson''s ratio for BCC transition metals

 The general expressions for the compliance , Young's modulus E(h k l) and Poisson's ratio υ(h k l) along an arbitrary direction [h k l] are given for cubic crystals. The representation surfaces, for which the length of the radius vector in the [h k l] direction equals to E(h k l) or υ(h k l), are constructed for seven BCC transition metals Cr, Fe, Mo, Nb, Ta, V and W. Neglecting W, which is isotropic, both representation surfaces of Young's modulus and Poisson's ratio are spherical surfaces. The remaining BCC transition metals may be grouped into two classes. In the first group (Cr, Mo, Nb and V) with negative values of s_A, Young's modulus surface has eight depressed corners and six rounded protuberances at the centers of the faces. In the second group (Fe and Ta) with positive values of s_A, on the contrary, Young's modulus surface has eight rounded protuberance corners and six depressions at the centers of the faces. The contrary conclusions are obtained for Poisson's ratio.     

Charge ordering characteristics in Y0.5Ca0.5MnO3 manganite

The charge ordering characteristics in Y_0.5Ca_0.5MnO₃ manganite, prepared by sol–gel process, have been investigated experimentally. It is found that the superlattice diffractions appear in the electron diffraction patterns recorded at low temperatures, while only basic Brag diffraction spots can be observed when temperature is higher than 300 K. This provides direct evidence for the existence of charge ordering in Y_0.5Ca_0.5MnO₃. The magnetization and specific heat measurements indicate the charge ordering temperature of Y_0.5Ca_0.5MnO₃ is 290 K, around which both the magnetization and specific heat reveal anomalous behaviors. We also observed that the MnO bond length changed remarkably and the effective number of carriers reduced prominently with decreasing temperature around charge ordering temperature through transform infrared spectra measurements.     

Flexural vibration analyses of piezoelectric ceramic tubes with mass loads in ultrasonic actuators

Based on Timoshenko beam model, a theoretical model of radially polarized piezoelectric ceramic tubes is investigated. In the model, the piezoelectric effects are considered, and the shear correction factor is introduced which reveals effects of the size of the cross-section and Poisson’s ratio. Based on the model, the particular attentions are devoted to effects of the boundary conditions at two ends on flexural resonance frequencies of the piezoelectric ceramic tubes. Changing the sizes of the tubes and the mass loads at both free ends, the variations of the flexural resonance frequencies of free–free piezoelectric ceramic tubes are calculated theoretically. Besides, the flexural resonance frequencies of the piezoelectric ceramic tube cantilevers with mass loads at one free end are also investigated theoretically. To verify accuracy of the theoretical mode, the flexural resonance frequencies for different lengths of the piezoelectric ceramic tubes and different loaded masses are measured experimentally. The theoretical results agree well with the experimental measurement, which demonstrates that the model is accurate for analyzing the flexural resonance frequencies of the piezoelectric ceramic tubes with mass loads.     

Transient thermal characterization of micro/submicroscale polyacrylonitrile wires

In this work, the thermal diffusivity of single polyacrylonitrile (PAN) wires with diameters from 4.62 μm down to 324 nm is measured by using our recently developed transient electro-thermal technique. The wires span from 23 μm to 126.2 μm in our measurement. Since PAN wires are dielectric, a thin Au film is coated on the surface of the wires to make them conductive. In the experiment, a step current (with ∼2 μs rising time) is fed to the sample. The sample is heated and takes a certain time to reach its steady thermal state. The temperature rising response of the sample is sensed by measuring the resistance change of the thin Au coating. From the average temperature evolution of the sample, the thermal diffusivity can be extracted. Three PAN wires with different diameters are synthesized using the electro-spinning technique and are measured to obtain their thermal diffusivities (around 1.53×10^-7 m²/s), which are slightly smaller than the bulk value. PACS 65.80.+n; 66.30.Xj; 44.10.+i