Detection of metalloproteins in human liver cytosol by synchrotron radiation X-ray fluorescence combined with gel filtration chromatography and isoelectric focusing separation

Synchrotron radiation X-ray fluorescence (SRXRF) spectroscopy is an advanced method of quantitative multielemental analysis with space resolution of several microm and sensitivities in the microg g(-1) range. It can be used for keeping track of trace elements after an electrophoretic separation of biological samples. In this paper, proteins in human liver cytosol were separated with gel filtration chromatography and thin layer isoelectric focusing (IEF). The contents of metal ions in protein bands were determined by SRXRF. The results showed that in the molecular weight (MW) range of 10 approximately 25 kDa, there were at least 2 Zn-containing bands with isoelectric point (pI) of 5 approximately 6 and 6.2 approximately 7, respectively and about 11 Fe-containing proteins with pI of 4.4, 4.6, 4.8, 5.0, 5.2, 5.3, 5.5, 5.6, 6.6, 6.8, and 7.2, respectively, present in human liver cytosol. The Zn-containing band with pI of 5-6 is the dominant species of zinc in this MW range. In addition, the Cu-containing bands with pI of 5.0 and below 4.8 were also detected. It is demonstrated that the procedure could be widely used in further investigations of the chemical species of trace elements in biological samples.     

Organosoluble and transparent polyimides derived from alicyclic dianhydride and aromatic diamines

Organosoluble polyimides were synthesized with the alicyclic dianhydride 1,8‐dimethylbicyclo[2,2,2]oct‐7‐ene‐2,3,5,6‐tetracarboxylic dianhydride and aromatic diamines. The polyimides possessed good solubility both in strong dipolar solvents and in common solvents; the thermal decomposition temperature of the polyimides exceeded 420 °C. Strong and flexible films of the polyimides, with the cutoff of ultraviolet–visible absorption lower than 310–320 nm, exhibited good features as the alignment layers for nematic liquid crystals with pretilt angles of 1.5–2.9°. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 40: 110–119, 2002     

Experimental and modeling study on decomposition kinetics of methane hydrates in different media

The decomposition kinetic behaviors of methane hydrates formed in 5 cm3 porous wet activated carbon were studied experimentally in a closed system in the temperature range of 275.8-264.4 K. The decomposition rates of methane hydrates formed from 5 cm3 of pure free water and an aqueous solution of 650 g x m(-3) sodium dodecyl sulfate (SDS) were also measured for comparison. The decomposition rates of methane hydrates in seven different cases were compared. The results showed that the methane hydrates dissociate more rapidly in porous activated carbon than in free systems. A mathematical model was developed for describing the decomposition kinetic behavior of methane hydrates below ice point based on an ice-shielding mechanism in which a porous ice layer was assumed to be formed during the decomposition of hydrate, and the diffusion of methane molecules through it was assumed to be one of the control steps. The parameters of the model were determined by correlating the decomposition rate data, and the activation energies were further determined with respect to three different media. The model was found to well describe the decomposition kinetic behavior of methane hydrate in different media.     

Fluoro-substituted DPP-bisthiophene conjugated polymer with azides in the side chains as ambipolar semiconductor and photoresist

Photoresists are essential for the fabrication of flexible electronics through all-photolithographic processes. Single component semiconducting photoresist exhibits both semiconducting and photo-patterning properties, and as a result, the device fabrication process can be simplified. However, the design of semiconducting polymeric photoresist with ambipolar semiconducting property remains challenging. In this paper, we report a single component semiconducting photoresist (PFDPPF4T-N₃) by incorporating azide groups and noncovalent conformation locks into the side alkyl chains and conjugated backbones of a diketopyrrolopyrrole-based conjugated polymer, respectively. The results reveal that PFDPP4FT-N₃ exhibits ambipolar semiconducting property with hole and electron mobilities up to 1.12 and 1.17 cm² V^?1 s^?1, respectively. Moreover, field effect transistors with the individual photo-patterned thin films of PFDPPF4T-N₃ also show ambipolar semiconducting behavior with hole and electron mobilities up to 0.66 and 0.80 cm² V^?1 s^?1, respectively. These results offer a simple yet effective design strategy for high-performance single component semiconducting photoresists, which hold great potential for flexible electronics processed by all photolithography.

     

特征线法在求解非线性液相吸附色谱模型中的应用

本文应用特征线法求解非线性液相吸附色谱分离过程模型，论述了特征线法的原理和步骤，讨论了时间步长和空间步长对模型数值解的影响，并用色谱分离甘露醇和山梨醇以及分离蔗糖和还原糖的实验进行验证，用特征线法计算的理论流出曲线与实验流出线吻合较好。本文还分折了模型中各个参数的灵敏度，结果表明：吸附等温方程Q＝Ci*／（ai＋biCi*）中参数ai比参数bi以及总传质系数ki有更高的灵敏度。     

Optical detection of triggered atherosclerotic plaque disruption by fluorescence emission analysis

Fluorescence emission analysis (FEA) has proven to be very sensitive for the detection of elastin, collagen and lipids, which are recognized as the major sources of autofluorescence in vascular tissues. FEA has also been reported to detect venous thromboemboli. In this paper we have tested the hypothesis that FEA can reproducibly detect in vivo and in vitro triggered plaque disruption and thrombosis in a rabbit model. Fluorescence emission (FE) spectra, recorded in vivo, detected Russell's viper venom (RVV)-induced transformation of atherosclerotic plaque. FE intensity at 410-490 nm 4 weeks after angioplasty was significantly lower (P < 0.0033 by analysis of variance) in RVV-treated rabbits when compared to control animals with stable plaque. FE spectral profile analyses also demonstrated a significant change in curve shape as demonstrated by polynomial regression analysis (R2 from 0.980 to 0.997). We have also demonstrated an excellent correlation between changes in FE intensity and the structural characteristics detected at different stages of "unstable atherosclerotic plaque" development using multiple regression analysis (R2 = 0.989). Thus, FEA applied in vivo is a sensitive and highly informative diagnostic technique for detection of triggered atherosclerotic plaque disruption and related structural changes, associated with plaque transformation, in a rabbit model.     

交联聚苯乙烯强－弱碱树脂的合成及脱色性能研究

交联聚苯乙烯氯甲基化后，分别与甲胺（或二甲胺）、三甲胺（或α－甲基吡啶、二甲基乙醇胺）混合胺化试剂进行亲核取代反应，合成了一系列同时带有强－弱碱功能基的交联聚苯乙烯树脂，并表征了这些树脂的结构，测定了树脂对甜菊甙的脱色性能，结果表明，这些树脂功能基碱性适中，脱色容量较高，甜菊甙损失较少，再生效率高。     

钇对2618合金组织及性能的影响

采用X射线，光学显微镜及扫描电镜等手段研究了2618合金中的组织与相结构，并研究了元素钆在2618合金中的存在形式及其对合金力学性能的影响。结果表明，微量钆元素在铝合金中是以化合物形式存在的；钆对合金中的铸态组织及Al9FeNi仃形态没有影响。由于微量钆的加入，降低了铜与镁在2618合金中的固溶量，减少了时效析出相A2CuMg数量，从而降低2618合金的室温强度帮在250℃的高温瞬时强度；但由于微量钆减少了铜与镁在2618合金中的扩散速度，延缓了时效机的粗化，并由于第二相数量的增多，因此提高了2618合金在250℃经100h高温热暴露后的高温瞬时强度。     

Separation and determination of podophyllum lignans by micellar electrokinetic chromatography

A micellar electrokinetic chromatography method was established for the quantitative analysis of seven podophyllum lignans in Podophyllum emodi Wall. var. chinesis sprague. The optimum buffer system was 10 mM NaH2PO4-5 mM borate-100 mM sodium dodecylsulfate-30% isopropanol (pH 7.20). Voltage was 18 kV and detection at 214 nm. The second derivative chromatogram was used to determine a low-content component and those not fully separated from adjacent ones. The RSD values of migration times and peak areas were <2.2 and <5.5%, respectively. The effects of several CE parameters on the resolutions were studied systematically.     

Use of p-dimethylaminobenzalhyde as a colored reagent for determination of procaine hydrochloride by spectrophotometry

Spectrophotometric determination of procaine hydrochloride is described. The procaine hydrochloride reacts with p-dimethylaminobenzalhyde in glacial acetic acid to form an Schiff base which is a yellow compound, and its maximum absorption wavelength is at 455nm, ₄₅₅=3.46×10⁴. The absorbance for procaine hydrochloride from 0.2 to 15 μg ml⁻¹ obeys Beer's law. The linear regression equation of the calibration graph is C=5.866A−0.02, with a linear regression correlative coefficient is 0.9994 and relative standard deviation (RSD) of 1.7%; the detection limit is 0.1 μg ml⁻¹; recovery is from 92.0 to 110.0%. Effects of reaction medium, temperature, gentamycin, beneylpenicillin, kanamycin, streptomycin, foreign ions, and stand for time on the determination of procaine hydrochloride have been examined. The results obtained by this method agreed with those by the official method (dead-stop titration). This method is rapid and simple, and can be used for the determination of procaine hydrochloride in injection solution of procaine hydrochloride.