高比能高功率全石墨烯锂离子电容器

石墨烯由于拥有超高比表面积和超高电导率而被作为电化学电容器材料广泛研究.本文采用树脂为碳源，通过一种方便快捷的树脂交换法制备一种具有高比表面积的多级孔三维石墨烯（3DG）.经过此种方法的催化、造孔、热处理等主要工艺步骤后，可显著增加石墨烯材料的小、介孔数量，从而提高材料的电化学性能.通过BET测试表明，3DG的比表面积可达2400 m²/g，孔体积达到2.0 cm³/g.以3DG作为正负极材料制备高比能量高功率型锂离子电容器（3DG-LIC），可使3DG-LIC的工作电压从传统超级电容器的2.5 V扩展到4.0 V，能量密度也从20 Wh/kg提高到105 Wh/kg.另外，相同的化学和微观结构能很好地平衡正负极的容量及速率，使高比能量高功率的3DG-LIC具有更宽阔的应用领域.     

Novel Synthetic Approach Toward C‐Substituted Piperazine Derivatives via C‐N Bonds Formation of α‐Bromoarylethanones and Ethanolamine

A new method for the synthesis of novel C‐substituted piperazine derivatives bearing aryl substituents on 2,6‐C positions has been developed by one‐pot three‐component sequential reaction of α‐bromoarylethanones with ethanolamine in the presence of formic acid. The structure of the novel compounds was established by nuclear magnetic resonance (NMR), mass spectrometry (MS), and elemental analysis. In addition, the crystal structure of 4e was determined by single X‐ray crystallography and a possible reaction mechanism was proposed.     

Synthesis and properties of novel soluble poly(amide‐imide)s with different pendant substituents

Two types of novel fluorinated diimide‐diacid monomers—[2,2′‐(4,4′‐(3′‐methylbiphenyl‐2,5‐diyl)bis(oxy)bis(3‐(trifluoromethyl)‐4,1‐phenylene))bis(1,3‐dioxoisoindoline‐5‐carboxylic acid)] (III) and [2,2′‐(4,4′‐(3′‐(trifluoromethyl)biphenyl‐2,5‐diyl)bis(oxy)bis(3‐(trifluoromethyl)‐4,1‐phenylene))bis(1,3‐dioxoisoindoline‐5‐carboxylic acid)] (IV)—were respectively designed and prepared by the condensation of diamines I and II with two molar equivalents of trimellitic anhydride. From both diimide‐diacids, two series of novel poly(amide‐imide)s (PAIs) (IIIa–IIIe and IVa–IVe) bearing different pendant groups were prepared by direct polymerization with various aromatic diamines (a–e). All the PAIs had a high glass transition temperatures (T_gs, 232–265 °C), excellent thermal stability (exhibiting only 5% weight loss at 493–542 °C under nitrogen) and good solubility in various organic solvents due to the introduction of the bulky pendant groups. The cast films of these PAIs (80–90 μm) had good optical transparency (73–81% at 450 nm, 85–88% at 550 nm and 87–89% at 800 nm) and low dielectric constants (2.65–2.98 at 1 MHz). The spin‐coated films of these PAIs presented a minimum birefringence value as low as 0.0077–0.0143 at 650 nm and low optical absorption at the near‐infrared optical communication wavelengths of 1310 and 1550 nm. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 3243–3252     

Synthesis of the Functional Hydrogels: Poly(N-isopropylacrylamide) Threaded onto the PEG Backbones Via RAFT

Functional poly(N-isopropylacrylamide) (PNIPAM) hydrogels were prepared by reversible addition fragmentation chain transfer (RAFT) polymerization of NIPAM in the presence of four-arm poly(ethylene glycol) (4A-PEG) as backbone and 4-cyanopentanoic acid dithiobenzoate functional α -cyclodextrin threaded onto the PEG as chain transfer reagent (CTA).The structure of the hydrogels was characterized in detail with FTIR techniques. The analytical results demonstrated that α -cyclodextrin remains in as-obtained hydrogels. The swelling behavior was investigated and the functional hydrogels (functional gels) showed accelerated shrinking kinetics and higher swelling ratio comparing with conventional hydrogel (CG). It could be attributed to the presence of dangling chains. The hydrogel exhibited rapid swelling and deswelling kinetics. In principle, the hydrogel might find a number of applications including an on-off system and drug delivery systems.     

Specific interaction between fluorine atoms and thiol groups accounting for higher domain purity and photostability in narrowband BHJ systems

In order to explore the role of fluorine atoms on photostability as well as morphology control of active layer in the presence of 1,4‐butanedithiol (BT), the four polymers with or without fluorine atoms in the backbones including polythieno[3,4‐b]thiophene/benzodithiophene, poly[(4,8‐bis‐(2‐ethylhexyloxy)‐benzo(1,2‐b:4,5‐b9)dithiophene)‐2,6‐diyl‐alt‐(4‐(2‐ethylhexanoyl)‐thieno[3,4‐b]thiophene‐)‐2‐6‐diyl)], poly[4,8‐bis(5‐(2‐ethylhexyl)thiophen‐2‐yl)benzo[1,2‐b;4,5‐b′]dithiophene‐2,6‐diyl‐alt‐(4‐(2‐ethylhexyl)‐3‐fluorothieno[3,4‐b]thiophene‐)‐2‐carboxylate‐2‐6‐diyl)], and poly[4,8‐bis‐(2‐ethyl‐hexyl‐thiophene‐5‐yl)‐benzo[1,2‐b:4,5‐b0]dithiophene‐2,6‐diyl]‐alt‐[2‐(20‐ethyl‐hexanoyl)‐thieno [3,4‐b]thiophen‐4,6‐diyl] were selected for comparison. It is found that the specimens containing fluorine atoms in polymer backbones showed of higher stability after illumination for 1 h in the presence of BT additive, contributing to the higher domain purity. The specific interaction between fluorine atoms and thiol groups was demonstrated by the appearance of novel absorption peak at 2663.1 cm^?1, in addition to the broadening of peak at 2556.2 cm^?1 ascribing to S? H stretching vibration as confirmed by Fourier transform infrared (FTIR) spectroscopy. The finding may guide the accurate use of thiols as effective solvent additive in morphology and stability optimization. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2019 , 57, 941–951     

The Linear Optical Unambiguous Discrimination of Hyperentangled Bell States Assisted by Time Bin

A linear optical unambiguous discrimination of hyperentangled Bell states is proposed for two‐photon systems entangled in both the polarization and momentum degrees of freedom (DOFs) assisted by time bin. This unambiguous discrimination scheme can completely identify 16 orthogonal hyperentangled Bell states using only linear optical elements, where the function of the auxiliary entangled Bell state is replaced by time bin. Moreover, the possibility of extending this scheme for distinguishing hyperentangled Bell states in n DOFs is discussed, and it shows that $2^{n+k+1}$ hyperentangled Bell states in n ( $n\ge 2$) DOFs can be distinguished with k ( $k<n$) auxiliary entangled states of additional DOFs by introducing a time delay, which decreases the auxiliary entanglement resource required for unambiguous discrimination of hyperentangled Bell state. Therefore, this scheme provides a new way for distinguishing hyperentangled states with current technology, which will extend the application of discrimination of hyperentangled states via linear optics to other quantum information protocols besides hyperdense coding schemes in the future.